nextcloud: added alternative to nesting

minecraft: added mod guide to docker image
audio: added and linked openaudible
package managers: added version-specific installation of AUR and manual installation of PKGBUILD

.gitignore

@@ -0,0 +1 @@
+*.pdf

README.md

@@ -3,4 +3,3 @@
 This is a wiki for guides and tips for using various software, operating system
 and tech related stuff.
 Many of the linux related articles and guides can be found in use at my [dotfiles](https://github.com/tiyn/dotfiles).
-

templates/android-program.md

@@ -0,0 +1,14 @@
+# /name/
+
+[/name/]() is a /description.
+
+## Setup
+
+On [Android](/wiki/android.md) /name/ is available on 
+[F-Droid](/wiki/android/f-droid.md)/the [Google Play store](/wiki/android.md#app-store) in a
+package called [/name/]().
+
+## Usage
+
+This section addresses the usage of /name/.
+/basic description for usage/

templates/docker-compose.md

@@ -0,0 +1,61 @@
+# /maintainer/ - /name/
+
+This is a [Docker](/wiki/docker.md) container for a /service/ server.
+The official container and documentation was made by
+[/maintainer/]().
+This docker-rebuild is made up by a `docker-compose.yml` file.
+In addition to the main container you need to connect a
+[/additional containers needed/]() to it.
+
+## Set-up
+
+Create the files `rebuild.sh`, `.env` and `docker-compose.yml` at the same
+place.
+Change the settings according to your needs and run `./rebuild.sh` afterwards.
+
+### Environment-variables
+
+Set the following variables in the `environment:` section.
+
+| Name       | Usage         | Default |
+| ---------- | ------------- | ------- |
+| `/name/`   | /description/ |         |
+
+<!-- ### Environment-variables -->
+<!---->
+<!-- The environment variables are set via the `.env` file and listed in the -->
+<!-- [corresponding section](#env). -->
+<!---->
+### Ports
+
+Set the following ports in the `ports:` section.
+
+| Container Port | Recommended outside port | Protocol  | Description   |
+| -------------- | ------------------------ | --------- | ------------- |
+| `/port/`       | `/port/`                 | /TCP/UDP/ | /description/ |
+
+### Volumes
+
+Set the following volumes with the -v tag.
+
+| Outside mount/volume name | Container mount | Description   |
+| ------------------------- | --------------- | ------------- |
+| `/volume name/`           | `/mount point/` | /description/ |
+
+### rebuild.sh
+
+```sh
+#!/bin/sh
+docker-compose down
+docker-compose up -d
+```
+
+<!-- ### .env -->
+<!---->
+<!-- ```sh -->
+<!-- ``` -->
+<!---->
+### docker-compose.yml
+
+```yml
+```

templates/docker.md

@@ -0,0 +1,39 @@
+# /maintainer/ - /name/
+
+This is a [Docker](/wiki/docker.md) container for a /service/ server.
+The official container and documentation was made by
+[/maintainer/]().
+
+## Set-up
+
+Create the file `rebuild.sh`.
+Change the settings according to your needs and run `./rebuild.sh` afterwards.
+
+## Environment-variables
+
+Set the following variables with the -e tag.
+
+| Name       | Usage         | Default |
+| ---------- | ------------- | ------- |
+| `/name/`   | /description/ |         |
+
+## Ports
+
+Set the following ports in the `ports:` section.
+
+| Container Port | Recommended outside port | Protocol  | Description   |
+| -------------- | ------------------------ | --------- | ------------- |
+| `/port/`       | `/port/`                 | /TCP/UDP/ | /description/ |
+
+## Volumes
+
+Set the following volumes with the -v tag.
+
+| Outside mount/volume name | Container mount | Description   |
+| ------------------------- | --------------- | ------------- |
+| `/volume name/`           | `/mount point/` | /description/ |
+
+## rebuild.sh
+
+```sh
+```

templates/program.md

@@ -0,0 +1,19 @@
+# /name/
+
+[/name/]() is a /description.
+
+## Setup
+
+The /name/ program can be installed from source as described [/on GitHub-the official website/]().
+Alternatively many [Linux](/wiki/linux.md) [package managers](/wiki/linux/package_manager.md) 
+package /name/ in the `/package/` package.
+The software can be setup via [Docker](/wiki/docker.md) with the [/docker name/ image]().
+
+## Usage
+
+This section addresses the usage of /name/.
+/basic description for usage/
+
+## Troubleshooting 
+
+This section will focus on errors and the fixing of errors of /name/.

wiki/*arr.md

@@ -0,0 +1,31 @@
+# \*ARR
+
+\*ARR application is a class of applications made as personal video recorders in
+the usenet and [BitTorrent](/wiki/bittorrent.md) domain.
+These applications include but are not limited to
+[Sonarr](https://github.com/Sonarr/Sonarr) for
+[TV shows](/wiki/video.md),
+[Radarr](https://github.com/Radarr/Radarr) for
+[movies](/wiki/video.md) and
+[Lidarr](https://github.com/Lidarr/Lidarr) for [music](/wiki/audio.md).
+
+## Setup
+
+For the different applications there are different [Docker](/wiki/docker.md)
+containers for setup:
+[Linuxservers Sonarr image](/wiki/docker/linuxserver_-_sonarr.md),
+[Linuxservers Radarr image](/wiki/docker/linuxserver_-_radarr.md) and
+[Linuxservers Lidarr image](/wiki/docker/linuxserver_-_lidarr.md).
+
+### Initial Configuration
+
+For the initial configuration navigate to `System` and `Status`.
+Afterwards check if there are any messages.
+There are probably a few steps that need to be taken to complete the setup.
+Set the `Download Clients` under `Settings`.
+For this an instance of a [BitTorrent Client](/wiki/bittorrent.md#clients) can
+be used.
+Next an indexer needs to be added.
+For this [Jackett](/wiki/jackett.md) can be used.
+A guide to add Jackett indexers is featured in
+[the Jackett entry](/wiki/jackett.md#adding-a-jackett-indexer-to-arr-applications).

wiki/acer.md

@@ -0,0 +1,13 @@
+# Acer
+
+[Acer](https://www.acer.com) is a company that produces computers.
+
+## Troubleshooting 
+
+This section focusses on vendor specific problems and ways how to fix them.
+
+### Recovering the BIOS Password 
+
+Acer laptops usually feature a 8-digit BIOS password.
+If it was lost it can easily be regenerated/recovered by using the website
+[BIOSBug](https://www.biosbug.com/acer).

wiki/airsonic-advanced.md

@@ -1,15 +1,15 @@
 # Airsonic-Advanced
 
 [Airsonic-Advanced](https://github.com/airsonic-advanced/airsonic-advanced) is
-a free and open-source personal media streamer mainly used for
+a free and open-source personal media streamer used for
-[music and audiobooks](./audio.md).
+[music, podcasts and audiobooks](./audio.md).
 It is a more modern implementation of [Airsonic](./airsonic.md) which in turn
 is a fork of [Subsonic](./subsonic.md).
 
 ## Setup
 
 The software can be setup via docker with the
-[linuxserver image](./docker-images/linuxserver_-_airsonic-advanced.md).
+[linuxserver image](./docker/linuxserver_-_airsonic-advanced.md).
 
 ### Initial configuration
 
@@ -36,7 +36,8 @@ Log in with the clients now works correctly.
 
 It is possible to use many different clients because the server is compatible
 with all the Subsonic clients.
-These can be found in the [Subsonic entry](./subsonic.md#clients).
+These can be found in the [Subsonic entry](./subsonic.md#clients) and the [Airsonic
+entry](/wiki/airsonic.md#clients).
 
 ## Scrobbling with Last.fm
 

wiki/airsonic.md

@@ -1,19 +1,22 @@
 # Airsonic
 
 [Airsonic](https://github.com/airsonic/airsonic) is a free and open-source
-personal media streamer mainly used for [music and audiobooks](./audio.md).
+personal media streamer used for [music,podcasts and audiobooks](./audio.md).
 It is a fork of [Subsonic](./subsonic.md).
 Airsonic is not maintained anymore and therefore deprecated.
 A more modern implementation of it is
 [Airsonic-Advanced](./airsonic-advanced.md).
 
-## Set up
+## Setup
 
-The software can be setup via docker with the
+The software can be setup via [Docker](/wiki/docker.md) with the
-[linuxserver image](./docker-images/linuxserver_-_airsonic.md).
+[linuxserver image](./docker/linuxserver_-_airsonic.md).
 
 ### Clients
 
 It is possible to use many different clients because the server is compatible
 with all the Subsonic clients.
 These can be found in the [Subsonic entry](./subsonic.md#clients).
+
+Additionally to these clients there is an improved web user interface made by tamland called
+[airsonic-refix](https://github.com/tamland/airsonic-refix).

wiki/android.md

@@ -0,0 +1,138 @@
+# Android
+
+[Android](https://www.android.com/) is a mobile operating system based on a modified
+[Linux](/wiki/linux.md) kernel.
+It is designed primarily for mobile devices with touch screens like tablets or smart phones.
+
+## Managing the Data
+
+The data and files stored on Android
+[smart devices](/wiki/smart_device.md#smartphones-and-tablet-computers) are sometimes needed on
+computers.
+
+For [Windows](/wiki/windows.md) this can easily be achieved by connecting it via USB.
+No further software is needed as the device manager handles the phone correctly most of the times.
+
+For [Linux-based systems](/wiki/linux.md) the
+[device](/wiki/smart_device.md#smartphones-and-tablet-computers) also has to be connected to the
+computer.
+But in this case also a software is needed to [mount it](/wiki/linux/disk-management.md#mounting),
+this software/program is called [android-file-transfer](/wiki/linux/android-file-transfer.md).
+For further information and a guide on how to mount a Android device correctly navigate to the
+[corresponding section](/wiki/linux/android-file-transfer.md#mounting-and-unmounting-android-device).
+
+## App Store
+
+The most used app store of android is the [Google Play Store](https://play.google.com/).
+A free and open-source alternative to it is [F-Droid](/wiki/android/f-droid.md) which only features
+open-source software.
+
+A list of open-source software options is also available on Alberto Mosconis
+[Github](/wiki/git_%28general%29.md#server-with-web-interface) repository
+[foss apps](https://github.com/albertomosconi/foss-apps/tree/main).
+
+Additionally open-source apps can be installed from source using
+[Obtainium](https://github.com/ImranR98/Obtainium).
+
+### Useful Applications
+
+This section addresses various useful applications.
+
+- [Arcticons](https://github.com/Donnnno/Arcticons) a mono-color line-based icon pack
+- [disky](https://github.com/newhinton/disky) is a filesystem analyzer that shows usage of the
+  storage.
+- [Markor](https://github.com/gsantner/markor) is a text editor supporting
+  [Markdown](/wiki/markup_language.md)
+- [SystemUI Tuner](https://play.google.com/store/apps/details?id=com.zacharee1.systemuituner) is an
+  application that allows various small tweaks for the Android user interface.
+- [SimpleMarkdown](https://f-droid.org/packages/com.wbrawner.simplemarkdown.free/) is another text
+  editor made for Markdown. It does work a bit better with a [NextCloud](/wiki/nextcloud.md).
+- [Fossify](https://github.com/FossifyOrg) is a suite of open-source apps that among other include
+  apps like calendar, file-manager, phone, messages and more.
+
+## Improve Security and Privacy
+
+Security and privacy are important topics, especially so when dealing with mobile phones.
+This section focusses on improving them on a standard Android system.
+
+The Elecronic Frontier Foundation recommends the following changes in their guide 
+[Guide](https://ssd.eff.org/module/how-to-get-to-know-android-privacy-and-security-settings).
+
+- [2FA](#multi-factor-authentication)
+- A strong password (though the usage of biometrics is not recommended due to the possibility of
+  being physically forced to unlock a phone with them)
+- Privacy permission
+- Find my device
+- Theft protection
+- Google privacy checkup
+- Backups (though the usage of them gives data to Google, so it may rather be turned off)
+- Disable WEP networks
+- Obscure lockscreen notifications
+
+The YouTube Channel 9to5Google also has a 
+[video on security and privcacy](https://www.youtube.com/watch?v=eswIeNxSIqo) which additionally
+suggest the following changes.
+
+- Alert when clipboard is accessed
+- Enable app pinnig
+
+Another option to add which may not improve security or privacy but improves usability - especially
+if a difficult passphrase is used - is the enabling of "Extend Unlock".
+There "Trusted Devices" can be set or the "On-body Detection" can be enabled.
+
+## Multi-Factor Authentication
+
+[Multi-factor authentication](/wiki/multi-factor_authentication.md) can easily be set up on android
+systems.
+For this the arguably most used app is
+[Google Authenticator](https://play.google.com/store/apps/details?id=com.google.android.apps.authenticator2&hl=de&gl=US).
+A free and open-source alternative for it is FreeOTP+.
+This app is available at [F-Droid](/wiki/android/f-droid.md) as
+[FreeOTP+](https://f-droid.org/de/packages/org.liberty.android.freeotpplus/) and on
+[Google Play Store](#app-store) by the
+[same name](https://f-droid.org/de/packages/org.liberty.android.freeotpplus/).
+
+## Custom ROMs
+
+Besites the stock-firmware of vendors there are also custom ROMs.
+These are alternative firmware variants made by third party providers.
+A well known custom ROM is [LineageOS](/wiki/android/lineageos.md).
+
+It is possible that some custom ROMs require the user to
+[unlock the bootloader](#unlocking-the-bootloader) before the installation can happen.
+
+## Unlocking the Bootloader
+
+Unlocking the bootloader can be a bit challenging for some vendors especially.
+
+For [smartphones and tablets](/wiki/smart_device.md#smartphones-and-tablet-computers) made by
+Xiaomi there are some steps that have to be done to unlock the bootloader.
+This section is based on an
+[article about unlocking the bootloader](https://new.c.mi.com/global/post/101245) on Xiaomi
+Community aswell as another
+[article on specifics for HyperOS](https://xiaomiui.net/how-unlock-bootloader-xiaomi-hyperos-53493/).
+First the user has to apply to unlock the bootloader.
+For this open the Xiaomi Community app, navigate to the "Settings" and select "Change region".
+Select the region "Global".
+A new option called "Unlock bootloader" now appears in the settings.
+Select "Unlock bootloader" and "Apply for unlocking".
+It may be possible that a specified time has to be waited for the application process to happen.
+Next go to the phones settings.
+Navigate to "About Phone" and "MIUI Version", repeatedly tap on "MIUI version" to get into
+developer mode if the phone is not already in developer mode.
+Navigate to "Additional settings" and "Developer options".
+Enable "OEM unlocking" and "USB debugging".
+Now add your Xiaomi account to your device.
+To do so navigate to "Mi Unlock status" and agree then "Add account and device".
+Shutdown your phone and boot into "Fastboot" by holding down the volume down button and the power
+button.
+Then connect it to a computer via USB.
+The following steps have to take place on a [Windows](/wiki/windows.md) system or an emulation or
+virtualization of it.
+Download and start "Mi Unlock" - it is available on the
+[article mentioned prior in this section](https://new.c.mi.com/global/post/101245).
+Follow the steps of the software, select "Unlock" and confirm it multiple times.
+It is possible that now 72 hours have to pass for the unlocking process to continue.
+If that is the case wait the specified amount of time and repeat the last step.
+Make sure to not apply for unlocking again and do not add your account to your phone again as this
+will reset the timer.

wiki/android/droidcam.md

@@ -0,0 +1,34 @@
+# DroidCam
+
+[DroidCam](https://www.dev47apps.com/) is an App developed and published
+by Dev47Apps for [Android](/wiki/android.md) systems.
+It enables a [smartphone](/wiki/smart_device.md) to be used as [webcam](/wiki/webcam.md).
+
+## Setup
+
+DroidCam needs to be set up on the phone aswell as on the computer to be used.
+
+On [Android](/wiki/android.md) DroidCam is available on the
+[Google Play Store](/wiki/android.md#app-store) in a package called
+[DroidCam Webcam](https://play.google.com/store/apps/details?id=com.dev47apps.droidcam).
+
+On the computer setup files for both [Linux](/wiki/linux.md) and [Windows](/wiki/windows.md) can be
+found on the [official website](https://www.dev47apps.com/).
+Alternatively most [Linux systems](/wiki/linux/package_manager.md) feature a package named
+`droidcam`.
+
+## Usage
+
+To initiate a connection between the [smartphone](/wiki/smart_device.md) and the computer first
+start the app on the smartphone.
+Make sure to be connected to the same W-LAN as the computer or alternatively connect them with an
+USB-cable.
+After starting the application an IP and a port will be displayed.
+These have to be pasted into the form that is shown on the computer after starting the corresponding
+program.
+After pressing `Connect` the link will be established.
+The [video feed](/wiki/webcam.md) can then be used in other programs such as Discord or
+[Matrix](/wiki/matrix.md).
+Additionally it can be piped into [OBS](/wiki/obs.md) to edit it more or create a scene.
+Despite the option the separate app [DroidCam OBS](https://www.dev47apps.com/obs/) is not
+necessarily needed.

wiki/android/f-droid.md

@@ -1,8 +1,8 @@
 # F-Droid
 
 [F-Droid](https://f-droid.org) is an installable catalogue of free and open source
-software for Android systems.
+software for [Android](/wiki/android.md) systems.
 
-## Installation
+## Setup
 
 To install F-Droid simply download and run the [apk](https://f-droid.org/F-Droid.apk).

wiki/android/gadgetbridge.md

@@ -0,0 +1,81 @@
+# Gadgetbridge
+
+[Gadgetbridge](https://codeberg.org/Freeyourgadget/Gadgetbridge/) is a free and open source software
+for [Android](/wiki/android.md) systems.
+It is a cloudless replacement for proprietary software for
+[smart devices](/wiki/smart_device.md), but is especially designed for
+[smartwatches and smart bands](/wiki/smart_device.md#smartwatches-and-smart-bands).
+
+## Setup
+
+Gadgetbridge is available on [F-Droid](/wiki/android/f-droid.md) in a package called
+[gadgetbridge](https://f-droid.org/packages/nodomain.freeyourgadget.gadgetbridge/).
+
+## Usage
+
+The following section addresses different uses and the configuration of different devices in
+Gadgetbridge.
+
+### Configuration of Devices
+
+Devices can be added to Gadgetbridge by clicking on the `+` in the main screen.
+Afterwards the device can simply be paired.
+
+A special pairing procedure is needed for Amazfit or Xiaomi devices.
+The following describes the steps that need to be done.
+
+- Download the
+  [Zepp app](https://play.google.com/store/apps/details?id=com.huami.watch.hmwatchmanager).
+- Pair the device with the Zepp app.
+- Use [huami-token](https://codeberg.org/argrento/huami-token/) to obtain the auth key by using the
+  command `python3 huami_token.py --method amazfit --email my_email --password password --bt_keys`
+  with adjusted values.
+- Uninstall the Zepp app and unpair the device from inside the bluetooth settings of the smart
+  phone.
+- Inside the Gadgetbridge app click on the `+`, find the device and enter the auth key by long
+  pressing on the devices name.
+  Afterwards navigate back to the scanning list.
+- Pair the device by clicking on the device name.
+
+Afterwards the device will be paired and connected.
+
+### Add Weather Function
+
+For correct displaying of weather data an additional app is needed.
+This section is based on the official documentation and recommendation that can be found on
+[Gadgetbridges Codeberg page](https://codeberg.org/Freeyourgadget/Gadgetbridge/wiki/Weather#user-content-install-and-configure-openweatherprovider).
+
+An example for this is the [Breezy Weather app](https://github.com/breezy-weather/breezy-weather)
+which is available on the F-Droid store.
+Install and configure it to your needs.
+Then check the Gadgetbridge option insdie the Breezy Weather app.
+Afterwards the weather function will be working.
+
+In the past an application named
+[Weather Notification](https://f-droid.org/en/packages/ru.gelin.android.weather.notification/)
+was often used.
+The installation and configuration process was similar but an
+[OpenWeather](https://home.openweathermap.org)  API key had to be specified in the Weather
+Notification app.
+For this an account on [OpenWeather](https://home.openweathermap.org) was needed.
+Due to different API versions Weather Notification currently does not work.
+However it is possible that an update to the application will bring a fix in the future.
+
+### Install Watchfaces
+
+Watchfaces can be installed by using Gadgetbridges `File Installer` option that is available in the
+menu of connected devices.
+Watchface files for Xiaomi/Amazfit devices can be downloaded on
+[amazfitwatchfaces.com](https://amazfitwatchfaces.com/).
+The same catalog is also available as an
+[Android app on the Google Play Store](https://play.google.com/store/apps/details?id=com.amazfitwatchfaces.st).
+
+This section is based on a 
+[Reddit post by myhairisawesome](https://www.reddit.com/r/Huawei/comments/1dexenl/watch_fit_3_is_there_a_way_to_create_custom_watch/).
+
+### Download Maps
+
+To download one or more map files to display them for activity GPS data on the mobile phone
+navigate to the main `Settings`.
+Then Select `Maps` and set the `Folder` aswell as download the map and move it into the selected
+folder.

wiki/android/ip_webcam.md

@@ -0,0 +1,41 @@
+# IP Webcam
+
+[IP Webcam](https://play.google.com/store/apps/details?id=com.pas.webcam&hl=de&gl=US) is an App
+developed and published by Pavel Khlebovich for [Android](/wiki/android.md) systems.
+It enables a [smartphone](/wiki/smart_device.md) to be used as [webcam](/wiki/webcam.md).
+
+When wanting to stream the screen and not the camera the application
+[ScreenStream](/wiki/android/screenstream.md) can be used.
+
+## Setup
+
+On [Android](/wiki/android.md) IP Webcam is available on the
+[Google Play Store](/wiki/android.md#app-store) in a package called
+[IP Webcam](https://play.google.com/store/apps/details?id=com.pas.webcam&hl=de&gl=US).
+
+## Usage
+
+To initiate a connection between the [smartphone](/wiki/smart_device.md) and the computer first
+start the app on the smartphone.
+Make sure to be connected to the same W-LAN as the computer or alternatively connect them with an
+USB-cable.
+After starting the application an IPv4 link be displayed.
+This link can be pasted into a [browser](/wiki/web_browser.md).
+There the video aswell as various settings will be available.
+An example link will look like the following.
+
+```txt
+http://192.168.178.66:8080
+```
+
+Additionally it can be piped into [OBS](/wiki/obs.md) to edit it or into
+[ffmpeg](/wiki/linux/ffmpeg.md) on [Linux](/wiki/linux.md) systems to create a virtual webcam
+device as explained in the
+[ffmpeg entry](/wiki/linux/ffmpeg.md#create-a-virtual-camera-using-an-ip-video-stream).
+The link used for applications like this will be the previously displayed IPv4 link aswell as an
+appended `/videofeed`.
+An example link will look like the following.
+
+```txt
+http://192.168.178.66:8080/videofeed
+```

wiki/android/ir_remote.md

@@ -0,0 +1,20 @@
+# IR Remote
+
+[IR Remote](https://gitlab.com/divested-mobile/irremote) is a free and open-source App developed
+for [Android](/wiki/android.md) systems.
+It can use a [smartphone](/wiki/smart_device.md#smartphones-and-tablet-computers) that is capable
+of sending [infrared](/wiki/infrared.md) signals to be used as an
+[infrared remote control](/wiki/infrared.md#remote-controls)
+
+## Setup
+
+On [Android](/wiki/android.md) IR Remote is available on the
+[F-Droid app store](/wiki/android/f-droid.md) in a package called
+[IR Remote](https://f-droid.org/de/packages/us.spotco.ir_remote/).
+
+## Usage
+
+IR Remote features many preset remote controls for devices of major brands.
+For devices not included in these presets the infrared codes can be searched on the web.
+The [infrared article](/wiki/infrared.md) features a
+[list of available resources](/wiki/infrared.md#remote-controls).

wiki/android/launcher.md

@@ -0,0 +1,13 @@
+# Launcher
+
+A launcher is the software that controls the home screen and app drawer on an
+[Android](/wiki/android.md) phone.
+
+## Software Options
+
+This section lists various possible launchers.
+
+- [Kvaesitso](https://kvaesitso.mm20.de/) is a free and open-source launcher.
+  It is available on [F-Droid](/wiki/android/f-droid.md) from its
+  [repository](https://f-droid.org/de/packages/de.mm20.launcher2.release/).
+  It focusses on a search but also has the option to label apps with tags.

wiki/android/lineageos.md

@@ -0,0 +1,22 @@
+# LineageOS
+
+[LineageOS](https://lineageos.org/) - or short Lineage - is a custom
+[Android](/wiki/android.md)-ROM and operating system for
+[Smartphones and Tablets](/wiki/smart_device.md#smartphones-and-tablet-computers) with mostly free
+and open-source software.
+It was formerly known as CyanogenMod.
+
+## Compatible Devices and Installation
+
+Lineage is only available on specific devices that feature a maintained build of LineageOS.
+A list of compatible devices sorted by vendor can be found on the
+[official wiki](https://wiki.lineageos.org/devices/).
+
+For installation navigate to the [official wiki](https://wiki.lineageos.org/devices/) and select
+the device LineageOS should be installed on.
+A guide will be available to help users in the process of installation.
+The device page also features any build file needed for the setup.
+If Google Services should be installed on the device close attention has to be payed in the guide
+section called "Installing Add-Ons".
+The Google Apps packages for Lineage can be downloaded from the
+[corresponding wiki page](https://wiki.lineageos.org/gapps/).

wiki/android/scrcpy.md

@@ -0,0 +1,20 @@
+# scrcpy
+
+[scrcpy](https://scrcpy.org/) is an application that allows remote
+mirroring of an [Android phones](/wiki/android.md) screen aswell as controlling it.
+
+## Setup
+
+scrcpy needs to be set up on the computer that displays the mirror of the smartphone used.
+
+Setup files for [Windows](/wiki/windows.md) can be found on the
+[official website](https://scrcpy.org/download/).
+Alternatively most [Linux systems](/wiki/linux/package_manager.md) feature a package named
+`scrcpy`.
+
+## Usage
+
+Connect the phone which is to be controlled with the computer via USB.
+Make sure USB debugging is enabled in the phones setting.
+Afterwards start up scrcpy.
+It is possible that debugging has to be confirmed on the phone again after starting the application.

wiki/android/screenstream.md

@@ -0,0 +1,13 @@
+# ScreenStream
+
+[ScreenStream](https://f-droid.org/de/packages/info.dvkr.screenstream/) is an application that
+allows to stream the screen via HTTP.
+
+When wanting to stream the camera and not the screen the application
+[IP Webcam](/wiki/android/ip_webcam.md) can be used.
+
+## Setup
+
+On [Android](/wiki/android.md) ScreenStream is available on 
+[F-Droid](/wiki/android/f-droid.md) in a package called
+[ScreenStream](https://f-droid.org/de/packages/info.dvkr.screenstream/).

wiki/android/tasker.md

@@ -0,0 +1,38 @@
+# Tasker
+
+[Tasker](https://tasker.joaoapps.com/) is a tool to automate various settings and other things on
+an [Android-phone](/wiki/android.md).
+
+## Setup
+
+On [Android](/wiki/android.md) /name/ is available on the
+[Google Play store](/wiki/android.md#app-store) in a package called
+[Tasker](https://play.google.com/store/apps/details?id=net.dinglisch.android.taskerm).
+
+Additionally the installation of [Tasker Settings](https://github.com/joaomgcd/TaskerSettings) is
+recommended.
+Please note that on the [Github releases page](https://github.com/joaomgcd/TaskerSettings/releases)
+there are different versions to be used with Xiaomi-phones.
+
+Another recommended action to be taken is to grant Tasker permission to write secure settings.
+This has to be done for Tasker to be able to turn on or off Wifi and Location.
+Allowing Tasker to set these settings can be done by the following command that has to be run on a
+computer with the corresponding phone connected via USB and USB-debugging enabled.
+
+```sh
+adb shell pm grant net.dinglisch.android.taskerm android.permission.WRITE_SECURE_SETTINGS
+```
+
+`adb` is also often used to install [LineageOS](/wiki/android/lineageos.md).
+
+## Usage
+
+This section addresses the usage of Tasker.
+
+On Tasker profiles, tasks and more can be manually added and edited.
+An easier way to get things started is importing premade Tasker projects from
+[TaskerNet](https://taskernet.com/?public).
+
+Recommended TaskerNet-projects are the following.
+
+- Flip To Shhh

wiki/audio.md

@@ -1,54 +1,179 @@
 # Audio
 
-Music and audiobooks is nice to have on your system.
+Music, audiobooks and podcast are widely enjoyed.
-There are multiple different approaches on how to get it working on your system
+There are multiple different approaches on how to get them onto your system
 depending on your needs.
 This entry describes how to handle audio data.
+Music and Audiobooks can be obtained by buying the digital files or by
+[extracting them off of a CD](#extract-audio-files-from-cds).
+Podcasts need a so called Podcatcher.
+A Podcatcher is used to subscribe to podcasts and download them automatically.
+For Linux specific music software navigate to the corresponding
+[wiki entry](/wiki/linux/audio.md).
+For voice based communication, social platforms or messengers navigate to the
+[communication article](/wiki/communication.md) and the corresponding
+[section](/wiki/communication.md#social-platforms-messengers-and-voip-services).
+For headphones navigate to the [headphones article](/wiki/headphones.md):
 
-## Media software
+## Technical Specifications
 
-If you want to keep your system clean of much data, you can use this kind of setup.
+This section aswell as its subsections address all technical things about audio, like connections,
+cables and devices.
+The most frequently used audio formats are also addressed.
+
+### Balanced & Unbalanced Audio
+
+Unbalanced audio uses a wire for the positive signal for audio transmission and one for ground.
+This is the most frequently used type of cable bound audio transmission.
+Usually they are connected with jack connections like 3.5mm and 6.25mm.
+
+Balanced audio uses one wire for the positive signal, one for negative and another one for the
+ground.
+Due to this extra cable a balanced connection can cancel out noise that entered the cable and
+affected both the positive and the negative signal.
+Balanced uses connectors like 4-pin XLR aswell as 2.5mm and 4.4mm jacks
+
+### Audio Formats and Encoding
+
+An audio format is an encoding of an audio file.
+There are lossy and lossless formats, the latter not compromising quality for
+smaller file sizes.
+Following is a list of often used formats:
+
+- wav is an uncompressed lossless format
+- aiff is an uncompressed lossless format
+- [flac](./flac_(codec).md) is a compressed lossless format
+- alac is a compressed lossless format
+- ape is a compressed lossless format
+- mp3 is a compressed lossy codec
+- aac is a compressed lossy codec
+- wma is a compressed lossy codec
+- ac3 is a compressed lossy codec usually found in DVDs
+- dts is a compressed lossy codec usually found in DVDs
+
+Music files can either be encoded lossy or lossless.
+Lossless formats can be converted from and to each other without loosing
+information.
+Lossless formats can also be converted to lossy formats to make the files
+smaller and save space.
+Files should not be converted to lossy formats more than once.
+Additionally lossy formats should not be converted to lossless formats as it
+increases the file size without adding any audio information.
+These not recommended conversions are called bad conversions.
+
+### Cue Files
+
+`.cue` files act as a table of contents for a CD rip.
+These can be created when the
+[audio of a CD is extracted](#extract-audio-files-from-cds).
+Usually this appears together with a single file for the whole CD.
+The audio file can then be split according to the `.cue` file.
+For splitting of `.flac` files on a Linux system check the
+[a flac (package) entry](/wiki/linux/flac_(package).md#splitting-flac-file-according-to-cue-file)
+for further informations.
+
+## Media Software
+
+If you want to keep your system clean of much data, you can use this kind of
+setup.
 There are differences depending on your preffered software interface.
 
-- [Airsonic](./airsonic.md) is a free fork of Subsonic, can be dockerized and has
+### Digital Audio Workstations
-  a web-interface and multiple possible client options.
 
-## Audio codecs
+Digital Audio Workstations - short DAWs - is an application that can be used to record, edit or
+produce audio files.
 
-An audio codec is an encoding of an audio file.
+- [LMMS](https://lmms.io/) is a free and cross-platform DAW that is highly compatible with
-There are lossy and lossless codecs, the latter not compromising quality for
+  [Linux-based systems](/wiki/linux.md).
-smaller file sizes.
-Following is a list of codecs written about in this wiki:
 
-- [flac](./flac_(codec).md) is a lossless codec
+### Software for Music/Podcasts/Audiobooks
 
-## Extract audio files from CDs
+The following is a list of server software, that is featured in this wiki.
+The corresponding client software is handled in the server softwares wiki entry.
+
+- [Subsonic](./subsonic.md) is a media streamer for music, podcasts and
+  audiobooks.
+  Subsonic is self-hostable.
+  Subsonic that can be dockerized and has a web-interface aswell as several
+  clients that can be used.
+  There are also the free and open-source implementations - that feature all the
+  same features and using its API - named [Airsonic](./airsonic.md) (no longer
+  maintained) and its inofficial successor [Airsonic-advanced](./airsonic.md).
+
+### Software for Podcasts
+
+- [Podgrab](./podgrab.md) is a free and open-source podcatcher that can also be
+  used to listen to them.
+  It is self-hostable and can be dockerized.
+  It has a web-interface and does not feature client software.
+
+#### Obtaining Audio Files from Different Services
+
+[YouTube](/wiki/youtube.md) features a wide variety of uploaded music and audiobooks.
+Using programs like [yt-dl](/wiki/youtube.md#downloading-youtube-videos) they can be downloaded.
+
+[Audible](https://www.audible.de/) is a popular service that makes sells audibooks.
+After purchasing an audiobook it can be downloaded directly from Audible after navigating to the
+`Library` tab and selecting `Download`.
+Another option is to use [OpenAudible](/wiki/openaudible.md).
+This program features various functions to manage Audible audiobooks that include download,
+converting and splitting.
+
+## Digitalizing and Analyzing Physical Mediums
+
+This section focusses on physical audio mediums like CDs, their digitalization to a digital audio
+file of [specific format](#audio-formats-and-encoding) and conversions between them.
+
+### Detect Bad Conversions
+
+The bitrate, format and the sample rate can be usually checked with simple
+tools.
+For Linux a simple software solution for this is the `file` command.
+Running it will display these features of a given audio file.
+This will however only display the format features.
+Bad convserions as described in
+[the previous section](#audio-formats-and-encoding) can not
+be detected by this.
+A spectral analysis can detect bad conversions.
+For this a audio analyzer like
+[Sonic Visualizer](https://www.sonicvisualiser.org/) is needed.
+Select a audio file and press `Add Spectogram` under `Layer`.
+This will display a spectogram.
+Music off of a retail CD and lossless songs have frequencies that extend up to
+22kHz and can extend even further for hi-res music.
+If the frequency extends up to at least 22kHz the file is lossless for sure.
+If the frequency is cut before and the file is encoded in a lossless file it has
+undergone a bad conversion and is not really lossless.
+
+### Extract Audio Files from CDs
 
 You can convert your CDs to files on your computer.
 This way you don't have to search for your CDs all the time.
 
 - [Exact Audio Copy](https://www.exactaudiocopy.de) for windows can rip music
   and automatically tag it with the help of a list of databases.
+- [fre:ac](https://freac.org/downloads-mainmenu-33) is a free cross-platform
+  audio converter and CD ripper with support for various popular formats.
 - [metaflac](./linux/flac_(package).md) for linux is a programm
   to edit the tags of [flac](./flac_(codec).md) files from the command line.
   It is bundled in the `flac` package for debian and arch based systems.
 - [MusicBrainz Picard](./picard.md) for linux is a
   graphical user interface for tagging files of many different formats.
 
-## Quality analysis of different versions of an album
+### Analysis of Different Versions of an Album
 
 While deciding on what version of an album is the best visit
 [Dynamic Range DB](https://dr.loudness-war.info).
 It shows dynamic range scorings of each version.
 
-## Get additional data to an album/single
+### Get Additional Data to an Album/Single
 
 If additional information for an album is needed, visit
 [Discogs](https://www.discogs.com).
 Discogs has tracklists, dates and more information to nearly all versions of
 albums and singles.
 
-## Naming convention
+### Naming Convention
 
 It is suggested to place the audio files in a directory named after the album they
 belong to.
@@ -57,3 +182,23 @@ Files can be named in the following scheme:
 
 - music: `[<discnumber>.]<tracknumber>._<artist>_-_<title>`
 - audiobooks: `[<discnumber>.]<tracknumber>._<artist>_-_<album>_<tracknumber>`
+
+### Scoring Music
+
+Scoring music has moved more and more into the computer realm.
+An easy and intuitive software that can be used for this is
+[MuseScore.org](https://musescore.org/).
+MuseScore is free and open-source and is cross-platform.
+On [Linux based systems](/wiki/linux.md) it is available on most distributions via the `musescore`
+package or their [website](https://musescore.org/download) and can be run with the command `mscore`.
+For Windows visit the [download section of the MuseScore website](https://musescore.org/download).
+
+### Getting Metadata
+
+Using [MediaInfo](https://github.com/MediaArea/MediaInfo) metadata of a file can be obtained.
+A command for this looks like the following.
+In this the file to obtain metadata to is assumed to be `audio.flac`.
+
+```sh
+mediainfo audio.flac
+```

wiki/benchmark.md

@@ -0,0 +1,8 @@
+# Benchmark
+
+A benchmark is the act of running a program or operation in order to assess its performance.
+Benchmarks can use a range of criteria to compare programs with one another.
+
+## Tools
+
+- [Hyperfine](/wiki/linux/hyperfine.md) is a benchmarking tool for programs and commands [Linux](/wiki/linux.md).

wiki/betterdiscord.md

@@ -0,0 +1,86 @@
+# BetterDiscord
+
+[BetterDiscord](https://betterdiscord.app) is an unofficial extension to
+[Discord](/wiki/discord.md) which allows to add various functionality through plugins and new
+themes.
+
+## Setup
+
+BetterDiscord can be downloaded from [the official website](https://betterdiscord.app).
+
+For [Linux-based systems](/wiki/linux.md) the tool
+[betterdiscordctl](https://github.com/bb010g/betterdiscordctl) can be used.
+After installing it the following commands have to be run for the stable version of Discord to be
+converted to BetterDiscord.
+
+```sh
+betterdiscordctl install
+```
+
+Afterwards BetterDiscord can be kept up to date with the following command.
+
+```sh
+betterdiscordctl self-upgrade
+```
+
+### Pacman Hook
+
+When using [Arch Linux](/wiki/linux/arch-linux.md) and its package managers
+[Pacman and Yay](/wiki/linux/package_manager.md#arch-linux-pacman-and-yay) a hook can be set that
+automatically updates the discord installation to setup betterdiscord using betterdiscordctl.
+The following is a [pacman hook](/wiki/linux/package_manager.md#hooks) that can be used to update
+betterdiscord automatically.
+Make sure to change the three occurences of `<username>` to the name of the user to install
+betterdiscord for.
+
+```sh
+[Trigger]
+Type = Package
+Operation = Install
+Operation = Upgrade
+Target = discord*
+
+[Action]
+Description = Rebuild BetterDiscord after Discord update
+When = PostTransaction
+Exec = /usr/bin/sh -c 'sudo -u <username> betterdiscordctl reinstall >/dev/null 2>&1; sudo -u <username> xvfb-run -a discord --help >/dev/null 2>&1; sudo -u <username> betterdiscordctl install >/dev/null 2>&1; true'
+Depends = xorg-server-xvfb
+Depends = betterdiscordctl
+NeedsTargets
+```
+
+## Usage
+
+This section addresses the usage of BetterDiscord.
+
+### Recommended Themes
+
+The following themes are recommended by the author of this wiki.
+
+- `midnight` is a dark, customizable discord theme.
+- `system24` is a tui-like discord theme.
+
+### Recommended Plugins
+
+The following plugins are recommended by the author of this wiki.
+
+- `BetterChatNames` improves chat names by removing dashes in chat channels.
+- `BetterFriendList` adds extra controls to the friend page.
+- `BetterVolume` allows to set user volume manually and higher than 200%.
+- `ChatCounter` adds a character counter to most inputs.
+- `DoNotTrack` stops Discord from tracking many things.
+- `GameActivityToggle` adds a quick-toggle game activity button.
+- `HideDisabledEmojis` hides disabled emojis form the emoji picker.
+- `ImageUtilities` adds several utilities for images/videos.
+- `InterTimestamps` allows you to insert timestamp markdown.
+- `InvisibleTyping` is an enhanced version of silent typing.
+- `MoreRoleColors` adds role colors to usernames.
+- `OnlineFriendCount` adds the old online friend count.
+- `PermissionViewer` allows to view a users permissions.
+- `PinDMs` allows to pin DMs.
+- `QuickMention` adds a mention button to the message 3-dot menu.
+- `ServerDetails` shows server details in the server list tooltip.
+- `SplitLargeMessages` allows you to enter larger messages, which will automatically split into
+  several smaller messages.
+- `StaffTag` adds a crown to server owners (or admins/management).
+- `Uncompressed Images` will improve image quality of previews.

wiki/bibliogram.md

@@ -8,8 +8,8 @@ as it is not possible anymore to show user pages but only single posts.
 
 ## Setup
 
-The software can be setup via docker with the
+The software can be setup via [Docker](/wiki/docker.md) with the
-[cloudrac3r image](./docker-images/cloudrac3r_-_bibliogram.md).
+[cloudrac3r image](./docker/cloudrac3r_-_bibliogram.md).
 
 ## Automatic redirect from Instagram
 
@@ -17,5 +17,5 @@ There are various add-ons to redirect from Instagram links to your (or a public)
 Bibliogram instance.
 For Firefox for example there is
 [privacy redirect](https://addons.mozilla.org/en-US/firefox/addon/privacy-redirect/).
-For Android there is
+For [Android](/wiki/android.md) there is
 [the UntrackMe app](https://framagit.org/tom79/nitterizeme) (available at [f-droid](./android/f-droid.md)).

wiki/bibliographic_software.md

@@ -0,0 +1,9 @@
+# Bibliographic Software
+
+A bibliographic software is software that manages a database of citation or bibliographic records.
+It produces citations for the stored records that are used in scholarly research.
+
+## Software Solutions
+
+- [Papis](/wiki/linux/papis.md) is a [command-line based](/wiki/linux/shell.md) for
+  [Linux](/wiki/linux.md) bibliography manager that can be used for LaTeX using the BibTeX format.

wiki/bind.md

@@ -6,9 +6,14 @@ interacting with the [DNS](./dns.md).
 ## Setup
 
 The software can be setup via docker with the
-[ventz image](./docker-images/ventz_-_bind.md).
+[ventz image](./docker/ventz_-_bind.md).
 
-## Configure Local DNS server with forwarding
+## Usage
+
+The following sections describe various use cases for Bind and how to set up
+specific domains.
+
+### Configure Local DNS server with forwarding
 
 After setting up the server.
 Look into the file `/etc/bind/named.conf.options`.
@@ -45,7 +50,7 @@ options {
 };
 ```
 
-## Configure local domains
+### Configure local domains
 
 This section explains how to add local domains for local systems.
 It is explicitly compatible with the
@@ -90,7 +95,7 @@ $TTL 1D
 
 
 To make the server you operate on the nameserver select a subdomain for it and
-subsitute `<servername>` for it and its IP address `<ip of server>`.
+subsitute `<servername>` for it and its [IP address](/wiki/ip_address.md) `<ip of server>`.
 The following uses a filled in example with multiple subdomains.
 It uses CNAME records as a placeholder for the ip.
 In the last section the domain itself `home.server` is mapped to the ip

wiki/bittorrent.md

@@ -0,0 +1,32 @@
+# BitTorrent
+
+[BitTorrent](https://www.bittorrent.org) is a communication protocol for
+peer-to-peer file sharing.
+In BitTorrent context Leeching describes the process of only downloading a
+file, seeding describes the download followed by also uploading it.
+
+## Clients
+
+There are various clients to use for BitTorrent down- and uploading.
+The list below shows clients with an existing entry in this wiki.
+
+- [Transmission](/wiki/transmission.md) is an easy to use client
+- [qBittorrent](/wiki/qbittorrent.md) is a very feature rich client
+- [CTorrent](http://www.rahul.net/dholmes/ctorrent/) is a command-line utility
+  that can be used as a client.
+
+## Personal Video Recorders
+
+There are a bunch of applications intended as personal video recorders for
+usenet or BitTorrent usage.
+These include the so called [\*ARR applications](/wiki/*arr.md).
+Usually an indexer application like [Jackett](/wiki/jackett.md) is needed.
+
+## Legal Situation
+
+This is not a legal advice.
+Take your local laws into account when downloading torrents.
+Some torrents can be copyright infringing and therefor illegal to download.
+Only download legal and safe torrents like the
+[Arch Linux ISO](/wiki/linux/arch-linux.md#create-installation-medium).
+Seeding it can help the community.

wiki/bluetooth.md

@@ -0,0 +1,8 @@
+# Bluetooth
+
+[Bluetooth](https://www.bluetooth.com/) is a short-range technology for wireless
+data transfer.
+
+For [Linux](/wiki/linux.md) based operating systems the
+[bluez package](/wiki/linux/bluez.md) is used as the implementation of the
+bluetooth standard.

wiki/calibre.md

@@ -0,0 +1,119 @@
+# calibre
+
+[calibre](https://calibre-ebook.com/) is a cross-platform, free and open-source
+software suite for [e-book](/wiki/e-book.md) management.
+It supports various formats aswell as conversion between them.
+
+## Usage
+
+This section addresses various features of calibre.
+
+## Adding a Plugin
+
+A plugin by a third party can be added by selecting a `.zip` archive - usually
+named `<plugin name>_plugin.zip` - under Preferences, Plugins, Load plugin from
+file.
+
+## Exporting Books
+
+Books can be exported by selecting them and pressing `Save to disk`.
+After selecting a path the books will be saved there.
+Preferences for this can be set under `Preferences` and `Saving books to disk`.
+Especially the creation of separate image and metadata files are often of
+interest.
+
+The template defines the path structure of the saved books.
+A simple template that will create the following structure is
+`{author_sort:re( &,;)}/{title}/{authors}_-_{title}`.
+
+```txt
+thomas_schickinger;_angelika_steger/diskrete_strukturen_2/thomas_schickinger_&_angelika_steger_-_diskrete_strukturen_2.pdf
+```
+
+This assumes the sort author names and sort titles are set as described in
+[the following section](#changing-the-default-author-and-title-sort).
+
+In the same view only the boxes `Save cover separately`, `Save metadata in a separate OPF file` and
+`Save data file as well` should be unchecked.
+All others are used to ensure a lowercase directory and file name without special characters.
+
+## Changing the Default Author and Title Sort
+
+Under `Preferences` and `Tweaks` the corresponding settings to change the title
+and author sort name can be found.
+
+`Author sort name algorithm` defines the author sort name.
+By setting `author_sort_copy_method = 'copy'` the author sort name is the same
+as the author name.
+After this setting has been changed right click `Authors` in the navigation bar
+on the left side and press `Manage Authors`.
+Then press `Recalculate all author sort values` for the change to take effect.
+
+`Control sorting of titles and series in the library display` defines the sort
+titles.
+Setting `title_series_sorting = 'strictly_alphabetic'` will use the standard
+title and wont make articles of titles suffixes.
+Afterwards select all books, right-click and select `Edit metadata in bulk`
+under `Edit metadata`.
+Then check the box `update title sort` and press `Ok` to update all sort titles.
+
+This entry is based on two posts on mobileread - one regarding the
+[sort author name](https://www.mobileread.com/forums/showthread.php?t=314663)
+and the other regarding the
+[sort title](https://www.mobileread.com/forums/showthread.php?t=249870).
+
+## Changing the Cover of a Book
+
+Changing covers of a book can be done by editing the metadata available via the right-click menu.
+However this is not enough in some cases.
+`.pdf` in contrast to `.epub` files won't save the cover just by this action.
+After changing the cover in the metadata screen `.pdf` files have to be converted to correctly
+display the cover since the first page of such a file is generally considered the cover.
+An alternative to this is the `PDF Cover` Plugin which allows the insertion of the cover before all
+other pages without an extra conversion.
+Please note that it prepends the cover and does not delete any pages.
+
+## Transfer Books to a Device
+
+To transfer books to a device connect a e-reader to the computer.
+After a while calibre should recognize the device which will be apparent by the appearance of
+additional buttons on the top menu like the `Send to device`- and the `Device`-Button.
+First make sure only the formats you want will be transfered.
+This can be done by selecting `Device`, `File formats` and checking the formats as needed.
+Afterwards select the books and press `Send to device` to start the process of transfering the
+devices.
+Alternatively only specific formats of the books can be send to the device by selecting
+`Send specific format to` and `Main memory` under the `Send to device` menu.
+If there are books that contain series metadata make sure to disconnect the e-reader once and
+reconnect it.
+Afterwards select `Update cached metadata on device` under `Device` to update the metadata
+including the series.
+Finally disconnect the device.
+
+## KEPUB Format
+
+The `.kepub` format is a format that is similar to a normal epub but has some performance
+improvements for Kobo devices.
+It is recommended to convert `.mobi` and `.epub` files to a `.kepub` file before
+[transfering it to a Kobo device](#transfer-books-to-a-device).
+For this the Plugin `KePub Output` by Joel Goguen [can be added](#adding-a-plugin) can be
+installed.
+Afterwards books can be converted the normal way, but now the output format `.kepub` is available.
+Additionally the `Kobo Touch Extended` plugin is recommended to use since it makes sending books to
+Kobo e-readers easier.
+Finally `KePub Metadata Reader` and `KePub Metadata Reader` make it possible to read and write
+metadata to `.kepub` files which is especially useful.
+
+## Exporting and Importing Settings and Libraries
+
+This section explains how to export and import the settings of one calibre instance to another.
+It is based on a
+[reddit comment by dwhitzzz](https://www.reddit.com/r/Calibre/comments/1313kix/comment/mo4b9rn).
+
+To export the settings and libraries of a calibre instance open the corresponding instance and then
+right-click the `calibre` Button on the top menu.
+Select `Export/import all calibre data`, select the export or import option and then follow the
+instructions.
+Please note that the export only works when an empty folder is selected.
+All calibre data will then be exported into the selected directory.
+For the import process the folder that includes the calibre data has to be selected.

wiki/chameleon.md

@@ -0,0 +1,14 @@
+# Chameleon
+
+[Chameleon](https://addons.mozilla.org/en-GB/firefox/addon/chameleon-ext/) is a
+[Firefox](/wiki/firefox.md) [add-on](/wiki/firefox.md#list-of-useful-firefox-add-ons) that spoofs
+your browser profile including user agent and screen size.
+It also can be used to change the [IP address](/wiki/ip_address.md)
+
+## Spoofing the IP Address
+
+This add-on can also be used to avoid [geo-blocking](/wiki/ip_address.md#geo-blocking) by selecting
+IP ranges in the `Headers` tab.
+The following are example ranges that work well for specific countries.
+
+- Brazil: `124.81.64.0` to `124.81.127.255`

wiki/communication.md

@@ -0,0 +1,21 @@
+# Communication
+
+Computer communication can have multiple different forms.
+There are voice and video calls aswell as text based messaging.
+This article bundles all of them.
+
+## Social Platforms, Messengers and VoIP Services
+
+This section lists some of the most common Voice over IP (VoIP) services, messengers and other
+social platforms.
+
+- [Discord](/wiki/discord.md) is a widely used, proprietary social platform.
+- [Matrix](/wiki/matrix.md) is a decentralized and open-source social platform.
+- [Signal](/wiki/signal.md) is an open-source, encrypted messaging service.
+
+### Soundboards
+
+A soundboard is a computer program to pipe audio files to an application.
+It can be used for short audio inserts.
+A cross-platform aswell as free and open-source soundboard is
+[Soundux](https://github.com/Soundux/Soundux)

wiki/cups.md

@@ -5,8 +5,8 @@ unix and unix-like systems.
 
 ## Setup
 
-The software can be setup via docker with the
+The software can be setup via [Docker](/wiki/docker.md) with the
-[linuxserver image](./docker-images/linuxserver_-_airsonic.md).
+[linuxserver image](./docker/linuxserver_-_airsonic.md).
 Additionally to this a client is needed on the system that need access to the
 server software.
 
@@ -21,3 +21,72 @@ For Linux computers follow these instructions:
 - Restart the CUPS service: `systemctl restart cups`
 - Test connectivity: `lpstat -r`
 - Check the detected printers with: `lpstat -v`
+
+## Usage
+
+This section addresses the usage of the CUPS.
+
+### Adding a Printer
+
+A printer can be added using the webinterface.
+The webinterface is normally reachable on port 631.
+This process is guided and should be self-explanatory.
+However in some cases additional drivers have to be installed.
+For example Brother label printers of the ptouch series feature drivers that are available for most
+[Linux](/wiki/linux.md) distributions in a package named `printer-driver-ptouch`.
+When adding the printer a network address has to be given.
+For USB printers this can be done via the USB protocol.
+Continuing the example Brother label Printer QL-600 the connection `usb://Brother/QL-600` is
+sufficient.
+When using multiple printers the serial number can be given in addition to this.
+This is done by appending it the the mentioned connection string and will look like
+`usb://Brother/QL-600?serial=000J1Z140282`.
+The examples using the Brother printer are taken from a
+[dwaves article](https://dwaves.de/2022/07/13/gnu-linux-debian-11-how-to-setup-brother-ql-600-labelprinter/).
+
+### Custom Formats For Brother Printers 
+
+This section is based on an entry in the
+[german FAQ on the brother website](https://support.brother.com/g/b/faqend.aspx?c=de&lang=de&prod=lpql1110nwbeuk&faqid=faqp00100409_000).
+
+Especially when using continuos-length Brother label printers it can be useful to set up custom
+formats.
+After setting up the CUPS install the package that provides
+`brpapertoollpr_<printer name in cups>` which differs from printer to printer.
+For example when using a Brother QL-600 this command is named `brpapertoollpr_ql600` and on some
+[Linux](/wiki/linux.md) distributions like [Arch Linux](/wiki/linux/arch-linux.md) is provided in a
+package called `brother-ql600`.
+
+To then set up a new custom format run the following command.
+
+```sh 
+brpapertoollpr_<printer name in command> -P <printer name in cups> -n <format name> -w <width> -h <height>
+```
+
+`<printer name in command>` is the part of the command that corresponds to the printer as described
+in the previous sentence.
+`<printer name in cups>` and `<format name>` are the name of the printer already set up and given in
+CUPS and the name chosen for the new format.
+And `<width>` and `<height>` are width and height of the new format both given in millimeters.
+A complete command could look something like the following. 
+
+
+```sh 
+brpapertoollpr_ql600 -P Brother_QL-600 -n "62mmx12mm" -w 62 -h 12
+```
+
+The command to delete a custom format is the following.
+It uses the same variables and names as the command above.
+
+```sh 
+brpapertoollpr_ql600 -P <printer name> -d <format name>
+```
+
+The usage of this command could look similar to the following example.
+
+```sh 
+brpapertoollpr_ql600 -P Brother_QL-600 -d "62mmx12mm"
+```
+
+After setting up the new format it can be selected in the CUPS interface and used with the Brother
+printer it was set up for.

wiki/database.md

@@ -0,0 +1,9 @@
+# Database
+
+A database is a data collections of a computer system.
+Most prominent type of database are SQL databases.
+
+## Database management systems (DBMS)
+
+- [MySQL](./docker/mysql.md) is a relational DBMS
+- [MariaDB](./docker/mariadb.md) is a relational DBMS that is a fork of MySQL

wiki/databases.md

@@ -1,9 +0,0 @@
-# Databases
-
-Databases are data collections of a computer system.
-Most prominent type of database are SQL databases.
-
-## Database management systems (DBMS)
-
-- [MySQL](./docker-images/mysql.md) is a relational DBMS
-- [MariaDB](./docker-images/mariadb.md) is a relational DBMS that is a fork of MySQL

wiki/deskreen.md

@@ -0,0 +1,5 @@
+# Deskreen
+
+[Deskreen](https://github.com/pavlobu/deskreen) is a tool for [Linux](/wiki/linux.md),
+[Windows](/wiki/windows.md) and MacOS that allows to extend the screen of a device with Deskreen
+installed to a device with any [web browser](/wiki/web_browser.md).

wiki/discord.md

@@ -0,0 +1,28 @@
+# Discord
+
+[Discord](https://discord.com/) is an social platform that combines voice and video conferences as
+well as instant messaging chats.
+
+## Usage
+
+This section addresses various features of Discord.
+
+### Disable Automatic Update Checks
+
+By default Discord performs an automatic check to see if it is up to date.
+On [Linux](/wiki/linux.md)-based systems it can be disabled by adding `"SKIP_HOST_UPDATE": true` to
+the `~/.config/discord/settings.json` file.
+
+### Setting Up a Music Bot
+
+For Discord there are various bots capable of playing music.
+The following is a list of bots featured in this wiki that can do this.
+
+- [Sinusbot](/wiki/sinusbot.md) is a self-hosted bot for Discord that can play music and sounds. 
+  It's closed-source and free of charge.
+  It also features [Teamspeak](/wiki/teamspeak.md) support.
+
+### Themes and Plugins
+
+By default Discord has no option to use themes or plugins.
+This however can be changed by using [BetterDiscord](/wiki/betterdiscord.md).

wiki/docker-images/kylemanna_-_openvpn.md

@@ -1,48 +0,0 @@
-# kylemanna - openvpn
-
-This is a docker container for an openvpn server.
-The official container and documentation was made by [kylemanna](https://hub.docker.com/r/kylemanna/openvpn).
-
-## Set-up
-
-Create the file `rebuild.sh`.
-Change the settings according to your needs and run `./rebuild.sh` afterwards.
-
-## Volumes
-
-Set the following volumes with the -v tag.
-
-| Outside mount/volume name | Container mount | Description              |
-| ------------------------- | --------------- | ------------------------ |
-| `ovpn`                    | `/etc/openvpn`  | storage for openvpn data |
-
-## Ports
-
-Set the following ports with the -p tag.
-
-| Container Port | Recommended outside port | Protocol | Description  |
-| -------------- | ------------------------ | -------- | ------------ |
-| `1194`         | `1194`                   | UDP      | openvpn port |
-
-## Additional
-
-There are some special variables to set.
-
-| Flag        | Usage                  |
-| ----------- | ---------------------- |
-| `--cap-add` | add linux capabilities |
-
-## rebuild.sh
-
-```sh
-#!/bin/sh
-docker stop openvpn
-docker rm openvpn
-docker pull kylemanna/openvpn
-docker run --name openvpn \
-    --restart unless-stopped \
-    --cap-add=NET_ADMIN \
-    -p 1194:1194/udp \
-    -v ovpn:/etc/openvpn \
-    -d kylemanna/openvpn
-```

wiki/docker-images/redis.md

@@ -1,14 +0,0 @@
-# redis
-
-This is a docker container for a redis database.
-The official container and documentation was made by [redis](https://hub.docker.com/_/redis).
-The Docker container is mainly used in combination with other containers.
-To achieve this in the easiest way use a docker-compose file.
-
-## Volumes
-
-Set the following volumes in the `volumes:` section of the docker-compose file.
-
-| Outside mount/volume name | Container mount | Description          |
-| ------------------------- | --------------- | -------------------- |
-| `redis`                   | `/data`         | storage for all data |

wiki/docker-images/zedeus_-_nitter.md

@@ -1,68 +0,0 @@
-# zedeus - nitter
-
-This is a docker container for the alternative Twitter frontend
-[nitter](../nitter.md).
-The official container and documentation was made by
-[zedeus](https://github.com/zedeus/nitter).
-
-## Set-up
-
-Create the file `rebuild.sh` and `nitter.conf` at the same place.
-Change the settings according to your needs and run `./rebuild.sh` afterwards.
-
-## Volumes
-
-Set the following volumes with the -v tag.
-
-| Outside mount/volume name | Container mount | Description               |
-| ------------------------- | --------------- | ------------------------- |
-| `nitter`                  | `/data`         | storage for all of nitter |
-
-## Ports
-
-Set the following ports with the -p tag.
-
-| Container Port | Recommended outside port | Protocol | Description |
-| -------------- | ------------------------ | -------- | ----------- |
-| `8080`         | `8080`                   | TCP      | WebUI       |
-
-## rebuild.sh
-
-```sh
-#!/bin/sh
-docker stop nitter
-docker rm nitter
-docker pull zedeus/nitter:latest
-docker run --name nitter \
-        --restart unless-stopped \
-        -v <path to nitter conf folder>/nitter.conf:/src/nitter.conf \
-        -v nitter:/data \
-        -p 8080:8080 \
-        -d zedeus/nitter:latest
-```
-
-## nitter.conf
-
-```txt
-[Unit]
-Description=Nitter (An alternative Twitter frontend)
-After=syslog.target
-After=network.target
-
-[Service]
-Type=simple
-
-# set user and group
-User=nitter
-Group=nitter
-
-# configure
-WorkingDirectory=/home/nitter/nitter
-ExecStart=/home/nitter/nitter/nitter
-
-Restart=always
-RestartSec=15
-
-[Install]
-WantedBy=multi-user.target
-```

wiki/docker.md

@@ -5,18 +5,29 @@ Due to easy handling and reproducable environments it is a useful tool.
 
 ## Setup
 
-- Arch linux: run `pacman -S docker` to install docker
+- [Arch Linux](/wiki/linux/arch-linux.md): run `pacman -S docker` to install docker
 - Ubuntu: visit [the official installation guide](https://docs.docker.com/engine/install/ubuntu/)
 
 Another possibility is to try the official convenience script.
-To get and execute it run the following in your terminal.
+To get and execute it run the following in your
+[terminal](/wiki/system_console.md).
 
 ```sh
 curl -fsSL https://get.docker.com -o get-docker.sh
 sudo sh get-docker.sh
 ```
 
-## Run Docker as non-root user
+## Usage
+
+This section addresses various features of Docker.
+
+### virtualize Operating Systems
+
+Docker is a tool that can be used to virtualize different programs and softwares.
+Especially for containerizing and virtualizing operating systems (mostly based on
+[Linux](/wiki/linux.md)) can be handled by [distrobox](https://github.com/89luca89/distrobox).
+
+### Run Docker as non-root user
 
 To run docker as a non-root user you need to add your user to the `docker` group.
 To do this create the group docker if it doesn't exist `sudo groupadd docker`
@@ -24,14 +35,14 @@ and then add your user to the group using `sudo usermod -aG docker $USER`.
 After that relog into your machine and you should be able to run
 `docker run hello-world`.
 
-## Tools and Visualisation
+### Tools and Visualisation
 
 The programs below are useful docker-management systems in different style.
 
 - [ctop](https://github.com/bcicen/ctop): top-like cli interface for containers
-- [portainer](./docker-images/portainer.md): web ui for managing docker and kubernetes
+- [portainer](https://www.portainer.io/): web ui for managing docker and kubernetes
 
-## Enable Nvidia GPUs
+### Enable Nvidia GPUs
 
 To use Nvidia GPUs with docker you need to install the nvidia-cuda-toolkit.
 There is a [guide on marmelab](https://marmelab.com/blog/2018/03/21/using-nvidia-gpu-within-docker-container.html)
@@ -39,8 +50,8 @@ that focusses on that topic.
 
 ### Block remote port access
 
-If you configured a reverse proxy to a port chances are you don't want the port
+If you configured a [reverse proxy](/wiki/reverse-proxy.md) to a port chances
-to be accessed outside of the proxy.
+are you don't want the port to be accessed outside of the proxy.
 Especially if you set up a authentication over nginx the open port will avoid
 the authentication.
 This can be changed at the forwarded docker-service by replacing for example
@@ -50,3 +61,11 @@ network, effectively banning remote access.
 
 If you use [Traefik](./traefik.md) it is not needed, because you don't have to
 publish ports to reverse proxy them.
+
+### Dockerize a graphical application
+
+A graphical application can easily be dockerized and made available over both
+the [web browser](/wiki/web_browser.md) or [VNC](/wiki/vnc.md).
+For this
+[jlesages baseimage-gui container](https://hub.docker.com/r/jlesage/baseimage-gui)
+can be used.

wiki/docker/actualbudget_-actual-server.md

@@ -0,0 +1,67 @@
+# actualbudget - actual-server
+
+This is a [Docker](/wiki/docker.md) container for an actualbudget server.
+The official container and documentation was made by
+[actualbudget](https://actualbudget.org/docs/install/docker/).
+This docker-rebuild is made up by a `docker-compose.yml` file.
+
+## Set-up
+
+Create the files `rebuild.sh`, `docker-compose.yml` at the same
+place.
+Change the settings according to your needs and run `./rebuild.sh` afterwards.
+
+### Ports
+
+Set the following ports in the `ports:` section.
+
+| Container Port | Recommended outside port | Protocol  | Description   |
+| -------------- | ------------------------ | --------- | ------------- |
+| `5006`         | `5006`                   | TCP       | WebUI         |
+
+### Volumes
+
+Set the following volumes with the -v tag.
+
+| Outside mount/volume name | Container mount | Description        |
+| ------------------------- | --------------- | ------------------ |
+| `actual`                  | `/data`         | Actual Budget data |
+
+### rebuild.sh
+
+```sh
+#!/bin/sh
+docker-compose down
+docker-compose up -d
+```
+
+### docker-compose.yml
+
+```yml
+version: '3'
+services:
+  actual_server:
+    image: docker.io/actualbudget/actual-server:latest
+    ports:
+      # This line makes Actual available at port 5006 of the device you run the server on,
+      # i.e. http://localhost:5006. You can change the first number to change the port, if you want.
+      - '5006:5006'
+    # environment:
+      # Uncomment any of the lines below to set configuration options.
+      # - ACTUAL_HTTPS_KEY=/data/selfhost.key
+      # - ACTUAL_HTTPS_CERT=/data/selfhost.crt
+      # - ACTUAL_PORT=5006
+      # - ACTUAL_UPLOAD_FILE_SYNC_SIZE_LIMIT_MB=20
+      # - ACTUAL_UPLOAD_SYNC_ENCRYPTED_FILE_SYNC_SIZE_LIMIT_MB=50
+      # - ACTUAL_UPLOAD_FILE_SIZE_LIMIT_MB=20
+      # See all options and more details at https://actualbudget.github.io/docs/Installing/Configuration
+      # !! If you are not using any of these options, remove the 'environment:' tag entirely.
+    volumes:
+      # Change './actual-data' below to the path to the folder you want Actual to store its data in on your server.
+      # '/data' is the path Actual will look for its files in by default, so leave that as-is.
+      - actual:/data
+    restart: unless-stopped
+
+volumes:
+   actual:
+```

wiki/docker/alexjustesen_-_speedtest-tracker.md

@@ -0,0 +1,67 @@
+# alexjustesen - speedtest-tracker
+
+This is a [Docker](/wiki/docker.md) container for a selfhosted internet speed
+tracker.
+The official container and documentation was made by
+[alexjustesen](https://github.com/alexjustesen/speedtest-tracker).
+
+## Set-up
+
+Create the file `rebuild.sh`.
+Change the settings according to your needs and run `./rebuild.sh` afterwards.
+It is important to set a correct app key as described in
+[the following section](#environment-variables).
+
+### Environment-variables
+
+Set the following variables with the -e tag.
+
+| Name                 | Usage                                                                                              | Default         |
+| -------------------- | -------------------------------------------------------------------------------------------------- | --------------- |
+| `APP_KEY`            | This is used for encryption and can be generated by `echo -n 'base64:'; openssl rand -base64 32;`  |                 |
+| `DB_CONNECTION`      | Database connection type                                                                           |                 |
+| `PGID`               | Group ID                                                                                           |                 |
+| `PUID`               | User ID                                                                                            |                 |
+| `APP_TIMEZONE`       | Timezone of the app                                                                                | `Europe/London` |
+| `DISPLAY_TIMEZONE`   | Timezone of the display                                                                            | `Europe/London` |
+| `SPEEDTEST_SCHEDULE` | Cron-formatted schedule for speedtest (`6 */6 * * *`: 6 minutes after every 6th hour)              |                 |
+
+### Volumes
+
+Set the following volumes with the -v tag.
+
+| Outside mount/volume name | Container mount | Description          |
+| ------------------------- | --------------- | -------------------- |
+| `speedtest_config`        | `/config`       | storage for config   |
+| `speedtest_keys`          | `/config/keys`  | storage for ssl keys |
+
+### Ports
+
+Set the following ports with the -p tag.
+
+| Container Port | Recommended outside port | Protocol | Description               |
+| -------------- | ------------------------ | -------- | ------------------------- |
+| `80`           | `8765`                   | TCP      | WebUI                     |
+| `443`          | ``                       | TCP      | SSL-encrypted WebUI       |
+
+### rebuild.sh
+
+```sh
+#!/bin/sh
+docker stop speedtest
+docker rm speedtest
+docker pull lscr.io/linuxserver/speedtest-tracker:latest
+docker run --name speedtest \
+    --restart unless-stopped \
+    -p 8765:80 \
+    -e PUID=1000 \
+    -e PGID=1000 \
+    -e APP_KEY="<generate>" \
+    -e DB_CONNECTION=sqlite \
+    -e SPEEDTEST_SCHEDULE="6 */6 * * *" \
+    -e APP_TIMEZONE="Europe/Berlin" \
+    -e DISPLAY_TIMEZONE="Europe/Berlin" \
+    -v speedtest_config:/config \
+    -v speedtest_keys:/config/keys \
+    -d lscr.io/linuxserver/speedtest-tracker:latest
+```

wiki/docker/alexta69_-_metube.md

@@ -0,0 +1,55 @@
+# alexta69 - metube
+
+This is a [Docker](/wiki/docker.md) container for a [MeTube](/wiki/metube.md)
+server.
+The official container and documentation was made by
+[alexta69](https://github.com/alexta69/metube).
+This docker-rebuild is made up by a `docker-compose.yml` file.
+
+## Set-up
+
+Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
+Change the settings according to your needs and run `./rebuild.sh` afterwards.
+
+### Volumes
+
+Set the following volumes in the `volumes:` section of the docker-compose file.
+
+| Outside mount/volume name | Container mount | Description                          |
+| ------------------------- | --------------- | ------------------------------------ |
+| `downloads`               | `/downloads`    | folder to download data to           |
+
+### Ports
+
+Set the following ports in the `ports:` section.
+
+| Container Port | Recommended outside port | Protocol | Description |
+| -------------- | ------------------------ | -------- | ----------- |
+| `8881`         | `8081`                   | TCP      | WebUI       |
+
+### rebuild.sh
+
+```sh
+#!/bin/sh
+docker-compose down
+docker pull alexta69/metube
+docker-compose up -d
+```
+
+### docker-compose.yml
+
+```yml
+version: "3"
+services:
+  metube:
+    image: alexta69/metube
+    restart: unless-stopped
+    ports:
+      - "8881:8081"
+    volumes:
+      - downloads:/downloads
+
+volumes:
+    downloads:
+        driver: local
+```

wiki/docker/awesometechnologies_-_synapse-admin.md

@@ -1,6 +1,7 @@
 # awesometechnologies - synapse-admin
 
-This is a docker container for a Synapse server of [Matrix](../matrix.md).
+This is a [Docker](/wiki/docker.md) container for a Synapse administration server of
+[Matrix](../matrix.md).
 The official container and documentation was made by
 [awesometechnologies](https://hub.docker.com/awesometechnologies/synapse-admin).
 This docker-rebuild is made up by a `docker-compose.yml` file.
@@ -10,7 +11,7 @@ This docker-rebuild is made up by a `docker-compose.yml` file.
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -18,7 +19,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ----------- |
 | `80`           | `80`                     | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -27,7 +28,7 @@ docker pull awesometechnologies/synapse-admin:latest
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "2"

wiki/docker/axhilrex_-_podgrab.md

@@ -0,0 +1,51 @@
+# axhilrex - podgrab
+
+This is a [Docker](/wiki/docker.md) container for a [Podgrab](../podgrab.md)
+server.
+The official container and documentation was made by
+[axhilrex](https://github.com/akhilrex/podgrab).
+
+## Set-up
+
+Create the file `rebuild.sh`.
+Change the settings according to your needs and run `./rebuild.sh` afterwards.
+
+### Environment-variables
+
+Set the following variables with the -e tag.
+
+| Name       | Usage                         | Default |
+| ---------- | ----------------------------- | ------- |
+| `PASSWORD` | Password for `podgrab` user   |         |
+
+### Volumes
+
+Set the following volumes with the -v tag.
+
+| Outside mount/volume name | Container mount | Description             |
+| ------------------------- | --------------- | ----------------------- |
+| `podgrab_config`          | `/config`       | Configuration files     |
+| `media_podcasts`          | `/assets`       | location for podcasts   |
+
+### Ports
+
+Set the following ports with the -p tag.
+
+| Container Port | Recommended outside port | Protocol | Description |
+| -------------- | ------------------------ | -------- | ----------- |
+| `8080`         | `8080`                   | TCP      | WebUI       |
+
+### rebuild.sh
+
+```sh
+#!/bin/sh
+docker stop podgrab
+docker rm podgrab
+docker pull akhilrex/podgrab
+docker run --name=podgrab \
+  --restart unless-stopped \
+  -p 8000:8080 \
+  -v "media_podcasts:/assets" \
+  -v "podgrab_config:/config" \
+  -d akhilrex/podgrab
+```

wiki/docker/b4bz_-_homer.md

@@ -1,6 +1,6 @@
 # b4bz - homer
 
-This is a docker container for a Homer static site.
+This is a [Docker](/wiki/docker.md) container for a Homer static site.
 The official container and documentation was made by [b4bz](https://hub.docker.com/r/b4bz/homer).
 
 ## Set-up
@@ -11,7 +11,7 @@ Place the file `config.yml` in the `homer` docker volume and change it to your
 needs.
 After that rerun `./rebuild.sh` to make update your config.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -19,7 +19,7 @@ Set the following volumes with the -v tag.
 | ------------------------- | --------------- | ---------------------- |
 | `homer`                   | `/www/assets`   | storage for icons, etc |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -27,7 +27,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `8080`         | `8080`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -41,7 +41,7 @@ docker run --name homer \
     -d b4bz/homer:latest
 ```
 
-## config.yml
+### config.yml
 
 ```yml
 title: "tmp"

wiki/docker/bbilly1_-_tubearchivist.md

@@ -0,0 +1,132 @@
+# bbilly1 - tubearchivist
+
+This is a [Docker](/wiki/docker.md) container for a [TubeArchivist](/wiki/tubearchivist.md)
+server.
+The Server consists of 3 Docker containers, one is the TubeArchivist main server, another is a
+TubeArchivist specific version of Elasticsearch and one a [redis](/wiki/docker/redis.md) instance.
+
+## Set-up
+
+Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
+Change the settings according to your needs and run `./rebuild.sh` afterwards.
+
+### Environment-variables
+
+Set the following environment-variables in the `environment:` section of the
+docker-compose file.
+
+The following table lists the environment variables for the image `bbilly1/tubearchivist`.
+
+| Name               | Usage                                       | Default |
+| -------------------| ------------------------------------------- | ------- |
+| `ES_URL`           | Network address for elastic search instance | ``      |
+| `REDIS_HOST`       | Redis broker URL                            | ``      |
+| `HOST_UID`         | User ID of Host                             | ``      |
+| `HOST_GID`         | Group ID of Host                            | ``      |
+| `TA_HOST`          | Domain name for TubeArchivist               | ``      |
+| `TA_USERNAME`      | User name for TubeArchivist                 | ``      |
+| `TA_PASSWORD`      | Password for TubeArchivist                  | ``      |
+| `ELASTIC_PASSWORD` | Password for Elasticsearch                  | ``      |
+| `TZ`               | Timezone                                    | ``      |
+
+The following table lists the environment variables for the image `bbilly1/tubearchivist-es`.
+
+| Name               | Usage                                       | Default |
+| -------------------| ------------------------------------------- | ------- |
+| `ELASTIC_PASSWORD` | Password for Elasticsearch                  | ``      |
+| `ES_JAVA_OPTS`     | Additional Java options                     | ``      |
+
+### Volumes
+
+Set the following volumes in the `volumes:` section of the docker-compose file.
+
+The following table lists the environment variables for the image `bbilly1/tubearchivist`.
+
+| Outside mount/volume name | Container mount          | Description                 |
+| ------------------------- | ------------------------ | --------------------------- |
+| `media`                   | `/youtube`               | storage for media           |
+| `cache`                   | `/cache`                 | storage for cache           |
+
+The following table lists the environment variables for the image `bbilly1/tubearchivist-es`.
+
+| Outside mount/volume name | Container mount                 | Description                 |
+| ------------------------- | ------------------------------- | --------------------------- |
+| `es`                      | `/usr/share/elasticsearch/data` | storage for elasticsearch   |
+
+### Ports
+
+Set the following ports in the `ports:` section.
+
+| Container Port | Recommended outside port | Protocol | Description |
+| -------------- | ------------------------ | -------- | ----------- |
+| `8000`         | `8881`                   | TCP      | WebUI       |
+
+### rebuild.sh
+
+```sh
+#!/bin/sh
+docker-compose down
+docker-compose up -d
+```
+
+### docker-compose.yml
+
+```yml
+version: '3.3'
+
+services:
+  ta:
+    restart: unless-stopped
+    image: bbilly1/tubearchivist
+    ports:
+      - 8881:8000
+    volumes:
+      - media:/youtube
+      - cache:/cache
+    environment:
+      - ES_URL=http://es:9200     # needs protocol e.g. http and port
+      - REDIS_HOST=redis          # don't add protocol
+      - HOST_UID=1000
+      - HOST_GID=1000
+      - TA_HOST=subdomain.domain.tld        # set your host name
+      - TA_USERNAME=admin                   # your initial TA credentials
+      - TA_PASSWORD=admin                   # your initial TA credentials
+      - ELASTIC_PASSWORD=verysecret         # set password for Elasticsearch
+      - TZ=Europe/Berlin                    # set your time zone
+    healthcheck:
+      test: ["CMD", "curl", "-f", "http://localhost:8000/health"]
+      interval: 2m
+      timeout: 10s
+      retries: 3
+    depends_on:
+      - es
+      - redis
+  redis:
+    image: redis/redis-stack-server
+    restart: unless-stopped
+    volumes:
+      - redis:/data
+    depends_on:
+      - es
+  es:
+    image: bbilly1/tubearchivist-es         # only for amd64, or use official es 8.9.0
+    restart: unless-stopped
+    environment:
+      - "ELASTIC_PASSWORD=verysecret"       # matching Elasticsearch password
+      - "ES_JAVA_OPTS=-Xms512m -Xmx512m"
+      - "xpack.security.enabled=true"
+      - "discovery.type=single-node"
+      - "path.repo=/usr/share/elasticsearch/data/snapshot"
+    ulimits:
+      memlock:
+        soft: -1
+        hard: -1
+    volumes:
+      - es:/usr/share/elasticsearch/data    # check for permission error when using bind mount, see readme
+
+volumes:
+  media:
+  cache:
+  redis:
+  es:
+```

wiki/docker/benbusby_-_whoogle-search.md

@@ -1,6 +1,7 @@
 # benbusby - whoogle-search
 
-This is a docker container for a [whoogle](../whoogle.md) meta-search machine.
+This is a [Docker](/wiki/docker.md) container for a [whoogle](../whoogle.md)
+meta-search machine.
 The official container and documentation was made by
 [benbusby](https://github.com/benbusby/whoogle-search).
 
@@ -13,7 +14,7 @@ just created folder.
 You can find the `docker-compose.yml` in the cloned directory.
 Set the variables, volumes and ports according and run the `rebuild.sh`.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -21,7 +22,7 @@ Set the following volumes with the -v tag.
 | ------------------------- | ---------------- | ---------------- |
 | `searx_config`            | `/config`        | configurations   |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -29,7 +30,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `5000`         | `8000`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -39,7 +40,7 @@ docker-compose up -d
 cd ..
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "2.2"

wiki/docker/bilde2910_-_hauk.md

@@ -0,0 +1,64 @@
+# bilde2910 - Hauk
+
+This is a docker container for a [Hauk](../hauk.md).
+
+## Set-up
+
+Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
+Additionally create a `config.php` file based on the
+[config-sample](https://github.com/bilde2910/Hauk/blob/master/backend-php/include/config-sample.php)
+at the location specified in your  `docker-compose.yml` (in this example it's
+`./config/hauk`).
+Change the config according to your needs.
+Do not change anything starting with `memcached` inside the `config.php`.
+Most importantly set the `public_url` correctly.
+For a simple multi-user setup set `auth_method` to `HTPASSWD`.
+Then inside the same folder of `config.php` run the following command to setup
+the first and optionally more users.
+
+```sh
+htpasswd -cBC 10 /etc/hauk/users.htpasswd <first user name>
+htpasswd -BC 10 /etc/hauk/users.htpasswd <other user name>
+```
+
+Finally run `./rebuild.sh`.
+
+### Volumes
+
+Set the following volumes in the `volumes:` section of the docker-compose file.
+
+| Outside mount/volume name | Container mount    | Description                    |
+| ------------------------- | ------------------ | ------------------------------ |
+| `./config/hauk`           | `/etc/hauk`        | config and password location   |
+
+### Ports
+
+Set the following ports in the `ports:` section.
+
+| Container Port | Recommended outside port | Protocol | Description            |
+| -------------- | ------------------------ | -------- | ---------------------- |
+| `80`           | `80`                     | TCP      | Basic service          |
+
+### rebuild.sh
+
+```sh
+#!/bin/sh
+docker-compose down
+docker pull bilde2910/hauk
+docker-compose up -d
+```
+
+### docker-compose.yml
+
+```yml
+version: "2"
+
+services:
+  hauk:
+    image: bilde2910/hauk
+    restart: unless-stopped
+    volumes:
+      - ./config/hauk:/etc/hauk
+    ports:
+      - "80:80"
+```

wiki/docker/chocobozzz_-_peertube.md

@@ -1,6 +1,7 @@
 # chocobozz - peertube
 
-This is a docker container for a [PeerTube](../peertube.md) server.
+This is a [Docker](/wiki/docker.md) container for a [PeerTube](../peertube.md)
+server.
 The official container and documentation was made by
 [chocobozz](https://github.com/chocobozzz/peertube).
 This docker-rebuild is made up by a `docker-compose.yml` file.
@@ -13,7 +14,7 @@ Create the files `rebuild.sh`, `.env` and `docker-compose.yml` at the same
 place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -21,7 +22,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ----------- |
 | `9000`         | `9000`                   | TCP      | WebUI       |
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -31,7 +32,7 @@ Set the following volumes with the -v tag.
 | `config`                  | `/config`                  | configuration data     |
 | `data`                    | `/data`                    | further data storage   |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -39,9 +40,9 @@ docker-compose down
 docker-compose up -d
 ```
 
-## .env
+### .env
 
-```txt
+```sh
 TZ="Europe/Berlin"
 
 PT_INITIAL_ROOT_PASSWORD=<root password>
@@ -74,7 +75,7 @@ PEERTUBE_SMTP_TLS=false
 PEERTUBE_SMTP_DISABLE_STARTTLS=false
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "3.3"

wiki/docker/cloudrac3r_-_bibliogram.md

@@ -1,7 +1,7 @@
 # cloudrac3r - bibliogram
 
-This is a docker container for the alternative Instagram frontend
+This is a [Docker](/wiki/docker.md) container for the alternative Instagram
-[Bibliogram](../bibliogram.md).
+frontend [Bibliogram](../bibliogram.md).
 The official container and documentation was made by
 [cloudrac3r](https://github.com/cloudrac3r/bibliogram).
 This docker-rebuild is made up by a `docker-compose.yml` file.
@@ -14,7 +14,7 @@ a folder within the just created folder.
 You can find the `docker-compose.yml` in the cloned directory.
 Set the variables, volumes and ports according and run the `rebuild.sh`.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -22,7 +22,7 @@ Set the following volumes with the -v tag.
 | ------------------------- | --------------- | ----------------------------------- |
 | `db`                      | `/app/db`       | storage for the bibliogram database |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -30,7 +30,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ----------- |
 | `10407`        | `10407`                  | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -40,7 +40,7 @@ docker-compose up -d
 cd ..
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "3"

wiki/docker/coturn_-_coturn.md

@@ -0,0 +1,72 @@
+# coturn - coturn
+
+This is a [Docker](/wiki/docker.md) container for a TURN/STUN server.
+A server like this can be used in a [Matrix](../matrix.md) server configuration.
+The official container and documentation was made by
+[coturn](https://github.com/coturn/coturn).
+This docker-rebuild is made up by a `docker-compose.yml` file.
+
+## Set-up
+
+Create the files `rebuild.sh`, `data/matrix/coturn/turnserver.conf` and `docker-compose.yml` at the
+same place.
+Change the settings according to your needs and run `./rebuild.sh` afterwards.
+For the `data/matrix/coturn/turnserver.conf` file change the values for `static-auth-secret`,
+`realm`, `cli-password` and `external-ip`.
+For the passwords [OpenSSL](/wiki/linux/openssl.md#password-generator) can be used to create a
+sufficiently random password.
+The value of `external-ip` consists of the local IP (left side) and the public IP (right side).
+To get the local IP the command `ip route get 1` can be used.
+For the public IP the command `curl api.ipify.org` can be used.
+
+
+### Ports
+
+Set the following ports in the `ports:` section.
+
+| Container Port | Recommended outside port | Protocol | Description |
+| -------------- | ------------------------ | -------- | ----------- |
+| `3478`         | `3478`                   | TCP/UDP  | TURN/STUN   |
+| `5349`         | `5349`                   | TCP/UDP  | TURN/STUN   |
+| `49152-65535`  | `49152-65535`            | UDP      | TURN/STUN   |
+
+### rebuild.sh
+
+```sh
+#!/bin/sh
+docker-compose down
+docker pull coturn/coturn:latest
+docker-compose up -d
+```
+
+### docker-compose.yml
+
+```yml
+version: "2"
+services:
+  coturn:
+    image: "instrumentisto/coturn:latest"
+    restart: "unless-stopped"
+    volumes:
+      - "./data/matrix/coturn/turnserver.conf:/etc/coturn/turnserver.conf"
+    ports:
+      - "49160-49200:49160-49200/udp"
+      - "3478:3478"
+      - "5349:5349"
+```
+
+### data/matrix/coturn/turnserver.conf
+
+```txt
+use-auth-secret
+static-auth-secret=SomeSecretPasswordForMatrix
+realm=matrix.example.com
+listening-port=3478
+tls-listening-port=5349
+min-port=49160
+max-port=49200
+verbose
+allow-loopback-peers
+cli-password=SomePasswordForCLI
+external-ip=192.168.0.2/123.123.123.123
+```

wiki/docker/dperson_-_torproxy.md

@@ -1,6 +1,6 @@
 # dperson - torproxy
 
-This is a docker container for a [Tor](../tor.md) proxy.
+This is a [Docker](/wiki/docker.md) container for a [Tor](../tor.md) proxy.
 The container and documentation was made by [dperson](https://hub.docker.com/r/dperson/torproxy).
 
 ## Set-up
@@ -8,7 +8,7 @@ The container and documentation was made by [dperson](https://hub.docker.com/r/d
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -17,16 +17,16 @@ Set the following volumes with the -v tag.
 | `tor_var`                 | `/var/lib/tor`  | Location for various files |
 | `tor_etc`                 | `/etc/tor`      | Various other config       |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
-| Container Port | Recommended outside port | Protocol | Description         |
+| Container Port | Recommended outside port | Protocol | Description          |
-| -------------- | ------------------------ | -------- | ------------------- |
+| -------------- | ------------------------ | -------- | -------------------- |
-| `8118`         | `8118`                   | TCP      | privoxy web proxy   |
+| `8118`         | `8118`                   | HTTP     | privoxy web proxy    |
-| `9050`         | `9050`                   | TCP      | socks protocol port |
+| `9050`         | `9050`                   | SOCKS    | socks protocol proxy |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/dyonr_-_jackettvpn.md

@@ -0,0 +1,54 @@
+# dyonr - jackettvpn
+
+This is a [Docker](/wiki/docker.md) container for a [OpenVPN](/wiki/openvpn.md)
+protected [Jackett](/wiki/jackett.md) server.
+The official container and documentation was made by
+[dyonr](https://github.com/DyonR/docker-Jackettvpn).
+
+## Set-up
+
+Create the file `rebuild.sh` and set `<username>` and `<password>` according to
+your openvpn.
+Additionally change the `LAN_NETWORK` if it differs for your local area network.
+Run `./rebuild.sh` afterwards to create the volumes.
+Place the openvpn certificate in the `jacket_config` docker volume inside the
+`openvpn` folder.
+After that rerun `./rebuild.sh` to make update your config.
+
+### Volumes
+
+Set the following volumes with the -v tag.
+
+| Outside mount/volume name | Container mount | Description            |
+| ------------------------- | --------------- | ---------------------- |
+| `jackett_config`          | `/config`       | storage for configs    |
+| `jackett_blackhole`       | `/blackhole`    | storage for magnets    |
+
+### Ports
+
+Set the following ports with the -p tag.
+
+| Container Port | Recommended outside port | Protocol | Description |
+| -------------- | ------------------------ | -------- | ----------- |
+| `9117`         | `9117`                   | TCP      | WebUI       |
+
+### rebuild.sh
+
+```sh
+docker stop jackett
+docker rm jackett
+docker pull dyonr/jackettvpn
+docker run --name jackett \
+    --restart unless-stopped \
+    -p 9117:9117 \
+    -v jackett_config:/config \
+    -v jackett_blackhole:/blackhole \
+    -e "VPN_ENABLED=yes" \
+    -e "VPN_TYPE=openvpn" \
+    -e "VPN_USERNAME=<username>" \
+    -e "VPN_PASSWORD=<password>" \
+    -e "LAN_NETWORK=192.168.178.0/24" \
+    --privileged \
+    -d dyonr/jackettvpn
+
+```

wiki/docker/dyonr_-_qbittorrentvpn.md

@@ -0,0 +1,76 @@
+# dyonr - qbittorrentvpn
+
+This is a [Docker](/wiki/docker.md) container for a
+[qBittorrent](../qbittorrent.md) server that is connected to the internet via
+an [openVPN tunnel](/wiki/openvpn.md).
+The official container and documentation was made by
+[dyonr](https://github.com/DyonR/docker-qbittorrentvpn).
+
+## Set-up
+
+Create the file `rebuild.sh`.
+Change the settings according to your needs and run `./rebuild.sh` afterwards.
+The default username of the web interface is `admin`.
+The default password is `adminadmin`.
+Both can be changed in the web interface after setup.
+
+### Environment-variables
+
+Set the following variables with the -e tag.
+
+| Name                | Usage                       | Default |
+| ------------------- | --------------------------- | ------- |
+| `VPN_ENABLE`        | Enable VPN                  | ` `     |
+| `VPN_USERNAME`      | Username for OpenVPN        | ` `     |
+| `VPN_PASSWORD`      | Password for OpenVPN        | ` `     |
+| `LAN_NETWORK`       | Subnet of the local network | ` `     |
+
+### Volumes
+
+Set the following volumes with the -v tag.
+
+| Outside mount/volume name | Container mount     | Description             |
+| ------------------------- | ------------------- | ----------------------- |
+| `qbittorrentvpn_config`   | `/config`           | Configuration files     |
+| `qbittorrentvpn_data`     | `/downloads`        | Storage for data        |
+
+### Ports
+
+Set the following ports with the -p tag.
+
+| Container Port | Recommended outside port | Protocol | Description |
+| -------------- | ------------------------ | -------- | ----------- |
+| `9091`         | `8080`                   | TCP      | WebUI       |
+
+### Additional
+
+There are some special variables to set.
+
+| Flag        | Usage                  |
+| ----------- | ---------------------- |
+| `--cap-add` | add linux capabilities |
+| `--device`  | connect devices        |
+| `--sysctl`  | configure systemctl    |
+
+### rebuild.sh
+
+```sh
+#!/bin/sh
+docker stop qbittorrentvpn
+docker rm qbittorrentvpn
+docker pull dyonr/qbittorrentvpn
+docker run --name qbittorrentvpn \
+        --restart unless-stopped \
+        -p 9091:8080 \
+        -v qbittorrentvpn_config:/config \
+        -v qbittorrentvpn_data:/downloads \
+        -e "VPN_ENABLED=yes" \
+        -e "VPN_TYPE=openvpn" \
+        -e "VPN_USERNAME=username" \
+        -e "VPN_PASSWORD=password" \
+        -e "LAN_NETWORK=192.168.0.0/16" \
+        --cap-add NET_ADMIN \
+        --device /dev/net/tun \
+        --sysctl "net.ipv4.conf.all.src_valid_mark=1" \
+        -d dyonr/qbittorrentvpn
+```

wiki/docker/gitea_-_gitea.md

@@ -1,6 +1,6 @@
 # gitea - gitea
 
-This is a docker container for a [Gitea](../gitea.md).
+This is a [Docker](/wiki/docker.md) container for a [Gitea](../gitea.md).
 The Server consists of 2 Docker containers, one is the gitea main server and one
 is a database.
 In addition to the main container you need to connect a [mySQL container](./mysql.md)
@@ -11,7 +11,7 @@ to it.
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
@@ -26,7 +26,7 @@ docker-compose file.
 | `DB_USER`   | Username for the database      |         |
 | `DB_PASSWD` | Password for the database      |         |
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -36,7 +36,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | `/etc/timezone`           | `/etc/timezone:ro` | link timezone                  |
 | `/etc/localtime`          | `/etc/localtime`   | link localtime                 |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -45,7 +45,7 @@ Set the following ports in the `ports:` section.
 | `3000`         | `3000`                   | TCP      | WebUI                  |
 | `22`           | `222`                    | TCP      | ssh port of git server |
 
-## Networks
+### Networks
 
 Set the following networks in the `networks:` section of the docker-compose file.
 
@@ -53,7 +53,7 @@ Set the following networks in the `networks:` section of the docker-compose file
 | ------- | --------------------- |
 | `gitea` | connect db with gitea |
 
-## Dependencies
+### Dependencies
 
 Set the following dependencies in the `depends_on:` section of the
 docker-compose file.
@@ -62,7 +62,7 @@ docker-compose file.
 | ---- | -------------------- |
 | `db` | Ensure db is running |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -70,7 +70,7 @@ docker-compose down
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "2"

wiki/docker/gramps-project_-_grampsweb.md

@@ -0,0 +1,111 @@
+# gramps-project - gramps
+
+This is a [Docker](/wiki/docker.md) container for a [Gramps](../gramps.md)
+server.
+The Server consists of 2 Docker containers, one is the gramps main server - split into two
+subcontainers - and one a [redis instance](/wiki/docker/redis.md).
+
+## Set-up
+
+Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
+Change the settings according to your needs and run `./rebuild.sh` afterwards.
+
+### Environment-variables
+
+Set the following environment-variables in the `environment:` section of the
+docker-compose file.
+
+| Name                                      | Usage                                | Default |
+| ----------------------------------------- | ------------------------------------ | ------- |
+| `GRAMPSWEB_TREE`                          | Will create a new tree if not exists | ``      |
+| `GRAMPSWEB_CELERY_CONFIG__broker_url`     | Redis broker URL                     | ``      |
+| `GRAMPSWEB_CELERY_CONFIG__result_backend` | Redis backend URL                    | ``      |
+| `GRAMPSWEB_RATELIMIT_STORAGE_URI`         | Storage URI                          | ``      |
+
+### Volumes
+
+Set the following volumes in the `volumes:` section of the docker-compose file.
+
+| Outside mount/volume name | Container mount          | Description                 |
+| ------------------------- | ------------------------ | --------------------------- |
+| `gramps_users`            | `/app/users`             | storage for users           |
+| `gramps_index`            | `/app/indexdir`          | storage for search index    |
+| `gramps_thumb_cache`      | `/app/thumbnail_cache`   | storage for thumbnails      |
+| `gramps_cache`            | `/app/cache`             | storage for cache           |
+| `gramps_secret`           | `/app/users`             | storage for flask secret    |
+| `gramps_db`               | `/root/.gramps/grampsdb` | Gramps database             |
+| `gramps_media`            | `/app/media`             | storage for media           |
+| `gramps_tmp`              | `/tmp`                   | storage for temporary files |
+
+### Ports
+
+Set the following ports in the `ports:` section.
+
+| Container Port | Recommended outside port | Protocol | Description |
+| -------------- | ------------------------ | -------- | ----------- |
+| `5000`         | `80`                     | TCP      | WebUI       |
+
+### rebuild.sh
+
+```sh
+#!/bin/sh
+docker-compose down
+docker pull ghcr.io/gramps-project/grampsweb:latest
+docker pull redis:alpine
+docker-compose up -d
+```
+
+### docker-compose.yml
+
+```yml
+version: "3"
+
+services:
+  grampsweb: &grampsweb
+    image: ghcr.io/gramps-project/grampsweb:latest
+    restart: always
+    ports:
+      - "5051:5000"  # host:docker
+    environment:
+      GRAMPSWEB_TREE: "Gramps Web"  # will create a new tree if not exists
+      GRAMPSWEB_CELERY_CONFIG__broker_url: "redis://grampsweb_redis:6379/0"
+      GRAMPSWEB_CELERY_CONFIG__result_backend: "redis://grampsweb_redis:6379/0"
+      GRAMPSWEB_RATELIMIT_STORAGE_URI: redis://grampsweb_redis:6379/1
+    depends_on:
+      - grampsweb_redis
+    volumes:
+      - gramps_users:/app/users
+      - gramps_index:/app/indexdir
+      - gramps_thumb_cache:/app/thumbnail_cache
+      - gramps_cache:/app/cache
+      - gramps_secret:/app/secret
+      - gramps_db:/root/.gramps/grampsdb
+      - gramps_media:/app/media
+      - gramps_tmp:/tmp
+
+  grampsweb_celery:
+    <<: *grampsweb  # YAML merge key copying the entire grampsweb service config
+    ports: []
+    container_name: grampsweb_celery
+    depends_on:
+      - grampsweb_redis
+    command: celery -A gramps_webapi.celery worker --loglevel=INFO
+
+  grampsweb_redis:
+    image: redis:alpine
+    container_name: grampsweb_redis
+    restart: always
+    volumes:
+      - redis:/data
+
+volumes:
+  gramps_users:
+  gramps_index:
+  gramps_thumb_cache:
+  gramps_cache:
+  gramps_secret:
+  gramps_db:
+  gramps_media:
+  gramps_tmp:
+  redis:
+```

wiki/docker/grimsi_-_gameyfin.md

@@ -0,0 +1,73 @@
+# grimsi - gameyfin
+
+This is a [Docker](/wiki/docker.md) container for a [Gameyfin](/wiki/game/gameyfin.md).
+
+## Set-up
+
+Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
+Change the settings according to your needs.
+Create the volume for the configuration files by running the command `docker volume create
+gameyfin_config`.
+Make sure to run the following command on the config volume `chown -R 1000:root gameyfin_config`.
+Afterwards run `./rebuild.sh`.
+
+### Environment-variables
+
+Set the following environment-variables in the `environment:` section of the
+docker-compose file.
+
+| Name                              | Usage                                   | Default |
+| --------------------------------- | --------------------------------------- | ------- |
+| `GAMEYFIN_USER`                   | user name for gameyfin                  |         |
+| `GAMEYFIN_PASSWORD`               | password for gameyfin                   |         |
+| `GAMEYFIN_IGDB_API_CLIENT_ID`     | id of twitch internet game database     |         |
+| `GAMEYFIN_IGDB_API_CLIENT_SECRET` | secret of twitch internet game database |         |
+
+### Volumes
+
+Set the following volumes in the `volumes:` section of the docker-compose file.
+
+| Outside mount/volume name | Container mount         | Description                    |
+| ------------------------- | ----------------------- | ------------------------------ |
+| `media_games`             | `/opt/gameyfin-library` | storage for games and configs  |
+
+### Ports
+
+Set the following ports in the `ports:` section.
+
+| Container Port | Recommended outside port | Protocol | Description            |
+| -------------- | ------------------------ | -------- | ---------------------- |
+| `8080`         | `8093`                   | TCP      | WebUI                  |
+
+
+### rebuild.sh
+
+```sh
+#!/bin/sh
+docker-compose down
+docker-compose up -d
+```
+
+### docker-compose.yml
+
+```yml
+version: "3"
+services:
+  gameyfin:
+    image: grimsi/gameyfin:latest
+    container_name: gameyfin
+    environment:
+      - GAMEYFIN_USER=admin
+      - GAMEYFIN_PASSWORD=admin
+      - GAMEYFIN_IGDB_API_CLIENT_ID=id
+      - GAMEYFIN_IGDB_API_CLIENT_SECRET=secret
+    volumes:
+      - media_games:/opt/gameyfin-library
+      - config:/opt/gameyfin-library/.gameyfin
+    ports:
+      - "8093:8080"
+
+volumes:
+    media_games:
+    config:
+```

wiki/docker/haugene_-_transmission-openvpn.md

@@ -1,7 +1,8 @@
 # haugene - transmission-openvpn
 
-This is a docker container for a [transmission](../transmission.md) server that
+This is a [Docker](/wiki/docker.md) container for a
-is connected to the internet via an openVPN tunnel.
+[transmission](../transmission.md) server that is connected to the internet via
+an [openVPN tunnel](/wiki/openvpn.md).
 The official container and documentation was made by
 [haugene](https://github.com/haugene/docker-transmission-openvpn).
 
@@ -12,7 +13,7 @@ To see which providers are supported take a look at the
 [official documentation](https://haugene.github.io/docker-transmission-openvpn/supported-providers/).
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following variables with the -e tag.
 
@@ -25,7 +26,7 @@ Set the following variables with the -e tag.
 | `CREATE_TUN_DEVICE` | Use a tunnel device         | ` `     |
 | `WEBPROXY_ENABLES`  | Use a webproxy              | ` `     |
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -35,7 +36,7 @@ Set the following volumes with the -v tag.
 | `transmission data`       | `/data`         | Storage for data        |
 | `/etc/localtime`          | `/etc/localtime:ro` | Link to the systemtime  |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -43,7 +44,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `9091`         | `9091`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -56,10 +57,10 @@ docker run --name transmission \
         -v /etc/localtime:/etc/localtime:ro \
         -v transmission_data:/data \
         -v transmission_config:/config \
-        -e OPENVPN_PROVIDER=vpn \
+        -e OPENVPN_PROVIDER=<vpn provider> \
-        -e OPENVPN_CONFIG=vpn-country-udp \
+        -e OPENVPN_CONFIG=<vpn_-_country-udp> \
-        -e OPENVPN_USERNAME=username \
+        -e OPENVPN_USERNAME=<username> \
-        -e OPENVPN_PASSWORD=password \
+        -e OPENVPN_PASSWORD=<password> \
         -e LOCAL_NETWORK=192.168.178.0/24 \
         -e CREATE_TUN_DEVICE=true \
         -e WEBPROXY_ENABLES=false \

wiki/docker/henrywhitaker3_-_speedtest-tracker.md

@@ -1,14 +1,16 @@
 # henrywhitaker3 - speedtest-tracker
 
-This is a docker container for a selfhosted internet speed tracker.
+This is a [Docker](/wiki/docker.md) container for a selfhosted internet speed
-The official container and documentation was made by [henrywhitaker3](https://hub.docker.com/r/henrywhitaker3/speedtest-tracker).
+tracker.
+The official container and documentation was made by
+[henrywhitaker3](https://hub.docker.com/r/henrywhitaker3/speedtest-tracker).
 
 ## Set-up
 
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following variables with the -e tag.
 
@@ -17,7 +19,7 @@ Set the following variables with the -e tag.
 | `OOKLA_EULA_GDPR` | set to `true` to accept EULA  |         |
 | `AUTH`            | set to `true` to enable login |         |
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -25,7 +27,7 @@ Set the following volumes with the -v tag.
 | ------------------------- | --------------- | ------------------ |
 | `speedtest`               | `/config`       | storage for config |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -33,7 +35,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `80`           | `8765`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/homeassistant_-_home-assistant.md

@@ -0,0 +1,45 @@
+# homeassistant - home-assistant
+
+This is a [Docker](/wiki/docker.md) container for a [Home Assistant](/wiki/home_assistant.md)
+server.
+The official container and documentation was made by
+[homeassistant](https://hub.docker.com/r/homeassistant/home-assistant).
+
+## Set-up
+
+Create the file `rebuild.sh`.
+Change the settings according to your needs and run `./rebuild.sh` afterwards.
+
+### Volumes
+
+Set the following volumes with the -v tag.
+
+| Outside mount/volume name | Container mount | Description                     |
+| ------------------------- | --------------- | ------------------------------- |
+| `homeassistant_data`      | `/config`       | configuration for devices, etc  |
+
+### Environment-variables
+
+Set the following environment-variables in the `environment:` section of the
+docker-compose file.
+
+| Name                  | Usage                       | Default                 |
+| --------------------- | --------------------------- | ----------------------- |
+| `TZ`                  | specify the timezone        | ``                      |
+
+### Additional
+
+The container needs acces to the host network.
+This will at the same time expose port 8123 as web interface.
+
+### rebuild.sh
+
+```sh
+docker run --name homeassistant \
+  --restart=unless-stopped \
+  --privileged \
+  --network=host \
+  -e TZ=Europe/Berlin \
+  -v homeassistant_data:/config \
+  -d ghcr.io/home-assistant/home-assistant:stable
+```

wiki/docker/immich-app_-_immich-server.md

@@ -0,0 +1,75 @@
+# immich-app - immich-server
+
+This is a [Docker](/wiki/docker.md) container for a [immich](/wiki/immich.md) server.
+The official container and documentation was made by
+[immich](https://github.com/immich-app/immich).
+This docker-rebuild is made up by a `docker-compose.yml` file.
+In addition to the main container you need to connect a
+[redis](/wiki/docker/redis.md) and a [postgres](/wiki/docker/postgres.md) container to it.
+
+## Set-up
+
+Create the files `rebuild.sh`, `.env` and `docker-compose.yml` at the same
+place.
+Please note that the `docker-compose.yml` file should be retrieved from the
+[Github releases page](https://github.com/immich-app/immich/releases/)
+Change the settings according to your needs and run `./rebuild.sh` afterwards.
+
+### Environment-variables
+
+The environment variables are set via the `.env` file and listed in the
+[corresponding section](#env).
+
+### Ports
+
+Set the following ports in the `ports:` section.
+
+| Container Port | Recommended outside port | Protocol  | Description   |
+| -------------- | ------------------------ | --------- | ------------- |
+| `2283`         | `3001`                   | TCP       | WebUI         |
+
+### Volumes
+
+Set the following volumes with the -v tag.
+
+| Outside mount/volume name | Container mount       | Description   |
+| ------------------------- | --------------------- | ------------- |
+| `immich_library`          | `/usr/src/app/upload` | Library       |
+| `/etc/timezone`           | `/etc/timezone:ro`    | Timezone      |
+
+### rebuild.sh
+
+```sh #!/bin/sh
+docker-compose down
+docker-compose up -d
+```
+
+### .env
+
+```sh
+# You can find documentation for all the supported env variables at https://immich.app/docs/install/environment-variables
+
+# The location where your uploaded files are stored
+UPLOAD_LOCATION=immich_library
+# The location where your database files are stored
+DB_DATA_LOCATION=immich_postgres
+
+# To set a timezone, uncomment the next line and change Etc/UTC to a TZ identifier from this list: https://en.wikipedia.org/wiki/List_of_tz_database_time_zones#List
+# TZ=Etc/UTC
+
+# The Immich version to use. You can pin this to a specific version like "v1.71.0"
+IMMICH_VERSION=release
+
+# Connection secret for postgres. You should change it to a random password
+# Please use only the characters `A-Za-z0-9`, without special characters or spaces
+DB_PASSWORD=postgres
+
+# Disable Machine Learning
+IMMICH_MACHINE_LEARNING_ENABLED=false
+IMMICH_MACHINE_LEARNING_URL=false
+
+# The values below this line do not need to be changed
+###################################################################################
+DB_USERNAME=postgres
+DB_DATABASE_NAME=immich
+```

wiki/docker/itzg_-_minecraft-server.md

@@ -1,14 +1,16 @@
 # itzg - minecraft-server
 
-This is a docker container for a [Minecraft](../games/minecraft.md) server.
+This is a [Docker](/wiki/docker.md) container for a
-The container and documentation was made by [itzg](https://hub.docker.com/r/itzg/minecraft-server).
+[Minecraft](/wiki/game/minecraft.md) server.
+The container and documentation was made by
+[itzg](https://hub.docker.com/r/itzg/minecraft-server).
 
 ## Set-up
 
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following variables with the -e tag.
 
@@ -22,7 +24,7 @@ Set the following variables with the -e tag.
 | `ICON`        | Link the Icon of the Server                                    |                                              |
 | `MOTD`        | Set the Message of the day                                     | "A Paper Minecraft Server powered by Docker" |
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -30,7 +32,7 @@ Set the following volumes with the -v tag.
 | ------------------------- | --------------- | ------------------------------ |
 | `minecraft`               | `/data`         | location for all relevant data |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -38,7 +40,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | --------- | ------------------ |
 | `25565`        | `25565`                  | Minecraft | Port for Minecraft |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -58,3 +60,25 @@ docker run --name minecraft \
     -e MOTD="Message of the day" \
     -d itzg/minecraft-server
 ```
+
+## Usage
+
+This section addresses the usage of the minecraft-server container.
+
+### Installing Mods
+
+Mods can be installed as described in the
+[corresponding article of the official documentation](https://github.com/itzg/docker-minecraft-server/blob/master/docs/mods-and-plugins/index.md).
+For this set the server type by using the `-e TYPE=<type>` flag.
+`<type>` is the API that is used as the core library.
+Most notably this value could be `FABRIC` or `FORGE`.
+After this the mods (as `.jar` files) can be placed in the `mods` directory of the
+[Docker](/wiki/docker.md) volume.
+Afterwards run the [`rebuild.sh`](#rebuildsh) to restart the server with loaded mods.
+
+#### Installing Datapacks
+
+The installation of datapacks is done similar to the described process in the
+[corresponding section of the minecraft entry](/wiki/game/minecraft.md#installing-datapacks).
+The only difference is the path to place the `.zip` datapack files in which is `world/datapacks` in
+case of this [Docker](/wiki/docker.md) image.

wiki/docker/iv-org_-_invidious.md

@@ -1,7 +1,8 @@
 # iv-org - invidious
 
-This is a docker container for [Invidious](../invidious.md).
+This is a [Docker](/wiki/docker.md) container for [Invidious](../invidious.md).
-The official container and documentation was made by [invidious](https://github.com/iv-org/invidious).
+The official container and documentation was made by
+[invidious](https://github.com/iv-org/invidious).
 This docker-rebuild is made up by a `docker-compose.yml` file.
 There is no official pre-build on docker-hub.
 In addition to the main container you need to connect a
@@ -11,12 +12,12 @@ In addition to the main container you need to connect a
 
 First of all create a folder for your `rebuild.sh`.
 After that clone invidious from
-[github](https://github.com/iv-org/invidious) into a folder within the
+[GitHub](https://github.com/iv-org/invidious) into a folder within the
 just created folder.
 You can find the `docker-compose.yml` in the cloned directory.
 Set the variables, volumes and ports according and run the `rebuild.sh`.
 
-## Environment-variables
+### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
@@ -33,11 +34,12 @@ docker-compose file.
 | `domain`               | set domain if using a reverse proxy                        |         |
 | `feed_threads`         | number of threads to use for refreshing subscription feeds | `1`     |
 | `full_refresh`         | refresh all videos of a channel when crawled               | `false` |
+| `hmac_key`             | hmac key that is required and needs to be set (randomly)   |         |
 | `https_only`           | use this flag to configure https reverse proxies           | `false` |
 | `popular_enabled`      | enable the popular section                                 | `true`  |
 | `registration_enabled` | enable registration for new users                          | `true`  |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -45,7 +47,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ----------- |
 | `3000`         | `3000`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -57,7 +59,7 @@ docker-compose up -d
 cd ..
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "3"
@@ -89,6 +91,7 @@ services:
         default_user_preferences:
             dark_mode: true
             default_home: "Subscriptions"
+        hmac_key: "hmac_key"
     healthcheck:
       test: wget -nv --tries=1 --spider http://127.0.0.1:3000/api/v1/comments/jNQXAC9IVRw || exit 1
       interval: 30m

wiki/docker/jkarlos_-_git-server-docker.md

@@ -1,14 +1,15 @@
 # jkarlos - git-server-docker
 
-This is a docker container for a [git](../git.md) server.
+This is a [Docker](/wiki/docker.md) container for a [git](/wiki/git_%28general%29.md) server.
-The official container and documentation was made by [jkarlos](https://hub.docker.com/r/jkarlos/git-server-docker).
+The official container and documentation was made by
+[jkarlos](https://hub.docker.com/r/jkarlos/git-server-docker).
 
 ## Set-up
 
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -17,7 +18,7 @@ Set the following volumes with the -v tag.
 | `git-server_repos`        | `/git-server/repos` | storage for git repos     |
 | `git-server_keys`         | `/git-server/keys`  | storage for user ssh keys |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -25,7 +26,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ------------------------------------- |
 | `22`           | `2222`                   | TCP      | ssh port for accessing the git server |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/johnktims_-_folding-at-home.md

@@ -1,14 +1,16 @@
 # johnktims - folding-at-home
 
-This is a docker container for [Folding@home](https://foldingathome.org/).
+This is a [Docker](/wiki/docker.md) container for
-The official container and documentation was made by [johnktims](https://hub.docker.com/r/johnktims/folding-at-home).
+[Folding@home](https://foldingathome.org/).
+The official container and documentation was made by
+[johnktims](https://hub.docker.com/r/johnktims/folding-at-home).
 
 ## Set-up
 
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -16,7 +18,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `7396`         | `7396`                   | TCP      | WebUI       |
 
-## Additional
+### Additional
 
 There are some special variables to set.
 
@@ -26,11 +28,7 @@ There are some special variables to set.
 | `--power` | set the default power to fold at home |
 | `--team`  | set your teamid to contribute points  |
 
-### GPU
+### rebuild.sh
-
-GPU support is documented in [the docker article](../docker.md).
-
-## rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -46,3 +44,9 @@ docker run --name folding-at-home \
     --power=full \
     --team=000000
 ```
+
+## Usage
+
+### GPU-Support
+
+GPU support is documented in [the docker article](../docker.md).

wiki/docker/jonohill_-_docker-openvpn-proxy.md

@@ -0,0 +1,68 @@
+# jonohill - docker-openvpn-proxy
+
+This is a [Docker](/wiki/docker.md) container for an
+[OpenVPN proxy](/wiki/openvpn.md#proxy).
+The official container and documentation was made by
+[jonohill](https://github.com/jonohill/docker-openvpn-proxy).
+
+## Set-Up
+
+Create the file `rebuild.sh`.
+Change the settings according to your needs and run `./rebuild.sh` afterwards.
+
+### Volumes
+
+Set the following volumes with the -v tag.
+
+| Outside mount/volume name | Container mount | Description              |
+| ------------------------- | --------------- | ------------------------ |
+| `ovpn-proxy`              | `/config`       | storage for openvpn data |
+
+### Ports
+
+Set the following ports with the -p tag.
+
+| Container Port | Recommended outside port | Protocol | Description  |
+| -------------- | ------------------------ | -------- | ------------ |
+| `9050`         | `8080`                   | HTTP     | proxy port   |
+
+### Environment-Variables
+
+Set the following variables with the -e tag.
+
+| Name                | Usage                       | Default |
+| ------------------- | --------------------------- | ------- |
+| `LOCAL_NETWORK`     | Set local network subnet    | ` `     |
+| `OPENVPN_USERNAME`  | username for OpenVPN        | ` `     |
+| `OPENVPN_PASSWORD`  | password for OpenVPN        | ` `     |
+
+### Additional
+
+There are some special variables to set.
+
+| Flag                                       | Usage                  |
+| ----------- | ---------------------- |
+| `--cap-add` | add linux capabilities |
+| `--device`  | connect devices        |
+| `--sysctl`  | configure systemctl    |
+
+### rebuild.sh
+
+```sh
+#!/bin/sh
+docker stop openvpn-proxy
+docker rm openvpn-proxy
+docker pull jonoh/openvpn-proxy
+docker run --name openvpn-proxy \
+        --restart unless-stopped \
+        -p "9050:8080" \
+        -v "openvpn-proxy:/config" \
+        -e LOCAL_NETWORK=192.168.178.0/24 \
+        -e OPENVPN_USERNAME="<OVPN_USERNAME>" \
+        -e OPENVPN_PASSWORD="<OVPN_PASSWORD>" \
+        --cap-add=NET_ADMIN \
+        --device /dev/net/tun \
+        --sysctl net.ipv6.conf.all.disable_ipv6=0 \
+        -d jonoh/openvpn-proxy
+
+```

wiki/docker/kylemanna_-_openvpn.md

@@ -0,0 +1,76 @@
+# kylemanna - openvpn
+
+This is a [Docker](/wiki/docker.md) container for an
+[OpenVPN server](/wiki/openvpn.md).
+The official container and documentation was made by
+[kylemanna](https://hub.docker.com/r/kylemanna/openvpn).
+
+## Set-up
+
+Create the file `rebuild.sh`.
+Change the settings according to your needs.
+
+Then run the following commands.
+Change `<VPN.SERVERNAME.COM>` to the URL the VPN is accessible at.
+If not already done set a port forward or something similar.
+
+```sh
+docker volume create --name openvpn
+docker run -v openvpn:/etc/openvpn --rm kylemanna/openvpn ovpn_genconfig -u udp://<VPN.SERVERNAME.COM>
+docker run -v openvpn:/etc/openvpn --rm -it kylemanna/openvpn ovpn_initpki
+```
+
+Afterwards run `./rebuild.sh`.
+
+### Volumes
+
+Set the following volumes with the -v tag.
+
+| Outside mount/volume name | Container mount | Description              |
+| ------------------------- | --------------- | ------------------------ |
+| `ovpn`                    | `/etc/openvpn`  | storage for openvpn data |
+
+### Ports
+
+Set the following ports with the -p tag.
+
+| Container Port | Recommended outside port | Protocol | Description  |
+| -------------- | ------------------------ | -------- | ------------ |
+| `1194`         | `1194`                   | UDP      | openvpn port |
+
+### Additional
+
+There are some special variables to set.
+
+| Flag        | Usage                  |
+| ----------- | ---------------------- |
+| `--cap-add` | add linux capabilities |
+
+### rebuild.sh
+
+```sh
+#!/bin/sh
+docker stop openvpn
+docker rm openvpn
+docker pull kylemanna/openvpn
+docker run --name openvpn \
+    --restart unless-stopped \
+    --cap-add=NET_ADMIN \
+    -p 1194:1194/udp \
+    -v ovpn:/etc/openvpn \
+    -d kylemanna/openvpn
+```
+
+## Usage
+
+### Create Certificates
+
+Each device that connects to the [OpenVPN](/wiki/openvpn.md) server should
+have a certificate to connect by.
+Create a certificate and retrieve it by running the following commands.
+Change all occurences of `<CLIENTNAME>` to the name of the client.
+
+```sh
+docker run -v openvpn:/etc/openvpn --rm -it kylemanna/openvpn easyrsa build-client-full <CLIENTNAME> nopass
+docker run -v openvpn:/etc/openvpn --rm kylemanna/openvpn ovpn_getclient <CLIENTNAME> > <CLIENTNAME>.ovpn
+```

wiki/docker/linuxserver_-_airsonic-advanced.md

@@ -1,7 +1,7 @@
 # linuxserver - airsonic-advanced
 
-This is a docker container for a [Airsonic-Advanced](../airsonic-advanced.md)
+This is a [Docker](/wiki/docker.md) container for a
-server.
+[Airsonic-Advanced](../airsonic-advanced.md) server.
 The official container and documentation was made by
 [linuxserver](https://github.com/linuxserver/docker-airsonic-advanced).
 
@@ -10,7 +10,7 @@ The official container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following variables with the -e tag.
 
@@ -20,7 +20,7 @@ Set the following variables with the -e tag.
 | `PGID` | GroupID  |         |
 | `TZ`   | Timezone |         |
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -33,7 +33,7 @@ Set the following volumes with the -v tag.
 | `media_audiobooks`        | `/audiobooks`   | Location for audiobooks |
 | `media_podcasts`          | `/podcasts`     | location for podcasts   |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -41,7 +41,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `4040`         | `4040`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/linuxserver_-_airsonic.md

@@ -1,14 +1,16 @@
 # linuxserver - airsonic
 
-This is a docker container for a [airsonic](../airsonic.md) server.
+This is a [Docker](/wiki/docker.md) container for a [airsonic](../airsonic.md)
-The official container and documentation was made by [linuxserver](https://hub.docker.com/r/linuxserver/airsonic).
+server.
+The official container and documentation was made by
+[linuxserver](https://hub.docker.com/r/linuxserver/airsonic).
 
 ## Set-up
 
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following variables with the -e tag.
 
@@ -18,7 +20,7 @@ Set the following variables with the -e tag.
 | `PGID` | GroupID  |         |
 | `TZ`   | Timezone |         |
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -31,7 +33,7 @@ Set the following volumes with the -v tag.
 | `media_audiobooks`        | `/audiobooks`   | Location for audiobooks |
 | `media_podcasts`          | `/podcasts`     | location for podcasts   |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -39,7 +41,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `4040`         | `4040`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/linuxserver_-_freshrss.md

@@ -0,0 +1,67 @@
+# linuxserver - jellyfin
+
+This is a [Docker](/wiki/docker.md) container for a
+[freshrss](https://freshrss.org/) server.
+The official container and documentation was made by
+[linuxserver](https://docs.linuxserver.io/images/docker-freshrss).
+This docker-rebuild is made up by a `docker-compose.yml` file.
+
+## Set-up
+
+Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
+Change the settings according to your needs and run `./rebuild.sh` afterwards.
+
+### Environment-variables
+
+Set the following environment-variables in the `environment:` section of the
+docker-compose file.
+
+| Name   | Usage                        | Default |
+| ------ | ---------------------------- | ------- |
+| `PUID` | Userid to run the container  |         |
+| `PGID` | Groupid to run the container |         |
+| `TZ`   | specify the timezone         |         |
+
+### Volumes
+
+Set the following volumes in the `volumes:` section of the docker-compose file.
+
+| Outside mount/volume name | Container mount | Description                          |
+| ------------------------- | --------------- | ------------------------------------ |
+| `config`                  | `/config`       | storage for config files of jellyfin |
+
+### Ports
+
+Set the following ports in the `ports:` section.
+
+| Container Port | Recommended outside port | Protocol | Description |
+| -------------- | ------------------------ | -------- | ----------- |
+| `7008`         | `80`                     | TCP      | WebUI       |
+
+### rebuild.sh
+
+```sh
+#!/bin/sh
+docker-compose down
+docker pull lscr.io/linuxserver/freshrss:latest
+docker-compose up -d
+```
+
+### docker-compose.yml
+
+```yml
+version: "2.1"
+services:
+  freshrss:
+    image: lscr.io/linuxserver/freshrss:latest
+    container_name: freshrss
+    environment:
+      - PUID=1000
+      - PGID=1000
+      - TZ=Etc/UTC
+    volumes:
+      - /path/to/data:/config
+    ports:
+      - 80:80
+    restart: unless-stopped
+```

wiki/docker/linuxserver_-_jellyfin.md

@@ -1,7 +1,9 @@
 # linuxserver - jellyfin
 
-This is a docker container for a [jellyfin](../jellyfin.md) server.
+This is a [Docker](/wiki/docker.md) container for a [jellyfin](../jellyfin.md)
-The official container and documentation was made by [linuxserver](https://hub.docker.com/r/linuxserver/jellyfin).
+server.
+The official container and documentation was made by
+[linuxserver](https://hub.docker.com/r/linuxserver/jellyfin).
 This docker-rebuild is made up by a `docker-compose.yml` file.
 
 ## Set-up
@@ -9,7 +11,7 @@ This docker-rebuild is made up by a `docker-compose.yml` file.
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
@@ -20,7 +22,7 @@ docker-compose file.
 | `PGID` | Groupid to run the container |         |
 | `TZ`   | specify the timezone         |         |
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -38,7 +40,7 @@ it is recommended to use them as external volumes (volumes section:
 To use the rebuild the volumes have to exist before creating the container
 (`docker volume create media_movies` and tvshows accordingly).
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -46,7 +48,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ----------- |
 | `8096`         | `8096`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -55,7 +57,7 @@ docker pull linuxserver/jellyfin:latest
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "2"

wiki/docker/linuxserver_-_lidarr.md

@@ -0,0 +1,86 @@
+# linuxserver - lidarr
+
+This is a [Docker](/wiki/docker.md) container for a [Lidarr](/wiki/*arr.md)
+server.
+The official container and documentation was made by
+[linuxserver](https://hub.docker.com/r/linuxserver/lidarr).
+
+## Set-up
+
+Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
+Change the settings according to your needs and run `./rebuild.sh` afterwards.
+It is recommended to set a download completed folder with the same internal and
+external mounts as your [BitTorent](/wiki/bittorrent.md) client.
+This guide uses the same mounts as used in the
+[Transmission](/wiki/transmission.md)
+[Docker container](/wiki/docker/haugene_-_transmission-openvpn.md).
+This namely causes the following line in the
+[`docker-compose.yml`](#docker-composeyml).
+
+```txt
+      - /var/lib/docker/volumes/transmission_data/_data/completed:/data/completed #optional
+```
+
+### Environment-variables
+
+Set the following environment-variables in the `environment:` section of the
+docker-compose file.
+
+| Name                  | Usage                       | Default                 |
+| --------------------- | --------------------------- | ----------------------- |
+| `PUID`                | user id for container user  | `1000`                  |
+| `PGID`                | group id for container user | `1000`                  |
+| `TZ`                  | specify the timezone        | `Etc/UTC`               |
+
+### Volumes
+
+Set the following volumes in the `volumes:` section of the docker-compose file.
+
+| Outside mount/volume name | Container mount   | Description                       |
+| ------------------------- | ----------------- | --------------------------------- |
+| `config`                  | `/config`         | directory for config              |
+| `complete`                | `/music`          | directory for music               |
+
+### Ports
+
+Set the following ports in the `ports:` section.
+
+| Container Port | Recommended outside port | Protocol | Description  |
+| -------------- | ------------------------ | -------- | ------------ |
+| `8686`         | `8686`                   | TCP      | webUI        |
+
+### rebuild.sh
+
+```sh
+#!/bin/sh
+docker-compose down
+docker pull lscr.io/linuxserver/lidarr:latest
+docker-compose up -d
+```
+
+### docker-compose.yml
+
+```yml
+version: "2.1"
+services:
+  lidarr:
+    image: lscr.io/linuxserver/lidarr:latest
+    container_name: lidarr
+    environment:
+      - PUID=0
+      - PGID=0
+      - TZ=Etc/UTC
+    volumes:
+      - config:/config
+      - complete:/music #optional
+      - /var/lib/docker/volumes/transmission_data/_data/completed:/data/completed #optional
+    ports:
+      - 8686:8686
+    restart: unless-stopped
+
+volumes:
+    config:
+        driver: local
+    complete:
+        driver: local
+```

wiki/docker/linuxserver_-_radarr.md

@@ -0,0 +1,86 @@
+# linuxserver - radarr
+
+This is a [Docker](/wiki/docker.md) container for a [Radarr](/wiki/*arr.md)
+server.
+The official container and documentation was made by
+[linuxserver](https://hub.docker.com/r/linuxserver/radarr).
+
+## Set-up
+
+Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
+Change the settings according to your needs and run `./rebuild.sh` afterwards.
+It is recommended to set a download completed folder with the same internal and
+external mounts as your [BitTorent](/wiki/bittorrent.md) client.
+This guide uses the same mounts as used in the
+[Transmission](/wiki/transmission.md)
+[Docker container](/wiki/docker/haugene_-_transmission-openvpn.md).
+This namely causes the following line in the
+[`docker-compose.yml`](#docker-composeyml).
+
+```txt
+      - /var/lib/docker/volumes/transmission_data/_data/completed:/data/completed #optional
+```
+
+### Environment-variables
+
+Set the following environment-variables in the `environment:` section of the
+docker-compose file.
+
+| Name                  | Usage                       | Default                 |
+| --------------------- | --------------------------- | ----------------------- |
+| `PUID`                | user id for container user  | `1000`                  |
+| `PGID`                | group id for container user | `1000`                  |
+| `TZ`                  | specify the timezone        | `Etc/UTC`               |
+
+### Volumes
+
+Set the following volumes in the `volumes:` section of the docker-compose file.
+
+| Outside mount/volume name | Container mount   | Description                       |
+| ------------------------- | ----------------- | --------------------------------- |
+| `config`                  | `/config`         | directory for config              |
+| `complete`                | `/movies`         | directory for music               |
+
+### Ports
+
+Set the following ports in the `ports:` section.
+
+| Container Port | Recommended outside port | Protocol | Description  |
+| -------------- | ------------------------ | -------- | ------------ |
+| `7878`         | `7878`                   | TCP      | webUI        |
+
+### rebuild.sh
+
+```sh
+#!/bin/sh
+docker-compose down
+docker pull lscr.io/linuxserver/radarr:latest
+docker-compose up -d
+```
+
+### docker-compose.yml
+
+```yml
+version: "2.1"
+services:
+  radarr:
+    image: lscr.io/linuxserver/radarr:latest
+    container_name: radarr
+    environment:
+      - PUID=0
+      - PGID=0
+      - TZ=Etc/UTC
+    volumes:
+      - config:/config
+      - complete:/movies #optional
+      - /var/lib/docker/volumes/transmission_data/_data/completed:/data/completed #optional
+    ports:
+      - 7878:7878
+    restart: unless-stopped
+
+volumes:
+    config:
+        driver: local
+    complete:
+        driver: local
+```

wiki/docker/linuxserver_-_sonarr.md

@@ -0,0 +1,86 @@
+# linuxserver - sonarr
+
+This is a [Docker](/wiki/docker.md) container for a [Sonarr](/wiki/*arr.md)
+server.
+The official container and documentation was made by
+[linuxserver](https://hub.docker.com/r/linuxserver/sonarr).
+
+## Set-up
+
+Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
+Change the settings according to your needs and run `./rebuild.sh` afterwards.
+It is recommended to set a download completed folder with the same internal and
+external mounts as your [BitTorent](/wiki/bittorrent.md) client.
+This guide uses the same mounts as used in the
+[Transmission](/wiki/transmission.md)
+[Docker container](/wiki/docker/haugene_-_transmission-openvpn.md).
+This namely causes the following line in the
+[`docker-compose.yml`](#docker-composeyml).
+
+```txt
+      - /var/lib/docker/volumes/transmission_data/_data/completed:/data/completed #optional
+```
+
+### Environment-variables
+
+Set the following environment-variables in the `environment:` section of the
+docker-compose file.
+
+| Name                  | Usage                       | Default                 |
+| --------------------- | --------------------------- | ----------------------- |
+| `PUID`                | user id for container user  | `1000`                  |
+| `PGID`                | group id for container user | `1000`                  |
+| `TZ`                  | specify the timezone        | `Etc/UTC`               |
+
+### Volumes
+
+Set the following volumes in the `volumes:` section of the docker-compose file.
+
+| Outside mount/volume name | Container mount   | Description                       |
+| ------------------------- | ----------------- | --------------------------------- |
+| `config`                  | `/config`         | directory for config              |
+| `complete`                | `/tv`             | directory for music               |
+
+### Ports
+
+Set the following ports in the `ports:` section.
+
+| Container Port | Recommended outside port | Protocol | Description  |
+| -------------- | ------------------------ | -------- | ------------ |
+| `8989`         | `8989`                   | TCP      | webUI        |
+
+### rebuild.sh
+
+```sh
+#!/bin/sh
+docker-compose down
+docker pull lscr.io/linuxserver/sonarr:latest
+docker-compose up -d
+```
+
+### docker-compose.yml
+
+```yml
+version: "2.1"
+services:
+  sonarr:
+    image: lscr.io/linuxserver/sonarr:latest
+    container_name: sonarr
+    environment:
+      - PUID=0
+      - PGID=0
+      - TZ=Etc/UTC
+    volumes:
+      - config:/config
+      - complete:/tv #optional
+      - /var/lib/docker/volumes/transmission_data/_data/completed:/data/completed #optional
+    ports:
+      - 8989:8989
+    restart: unless-stopped
+
+volumes:
+    config:
+        driver: local
+    complete:
+        driver: local
+```

wiki/docker/linuxserver_-_syncthing.md

@@ -1,15 +1,16 @@
 # linuxserver - syncthing
 
-This is a docker container for syncthing for
+This is a [Docker](/wiki/docker.md) container for syncthing for
 [file synchronization](../file-synchronization.md).
-The official container and documentation was made by [linuxserver](https://hub.docker.com/r/linuxserver/syncthing).
+The official container and documentation was made by
+[linuxserver](https://hub.docker.com/r/linuxserver/syncthing).
 
 ## Set-up
 
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following variables with the -e tag.
 
@@ -20,7 +21,7 @@ Set the following variables with the -e tag.
 | `TZ`        | Timezone         |         |
 | `UMASK_SET` | setting usermask |         |
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -28,7 +29,7 @@ Set the following volumes with the -v tag.
 | ------------------ | --------------- | ----------------------------------------------- |
 | `syncthing_config` | `/config`       | storage for config and possible downloaded data |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -38,7 +39,7 @@ Set the following ports with the -p tag.
 | `22000`        | `22000`                  | TCP      | Syncthing internal |
 | `21027`        | `21027`                  | UDP      | Syncthing internal |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -48,7 +49,8 @@ docker pull linuxserver/syncthing
 docker run --name syncthing \
     --restart unless-stopped \
     -p 8384:8384 \
-    -p 22000:22000 \
+    -p 22000:22000/tcp \
+    -p 22000:22000/udp \
     -p 21027:21027/udp \
     -v syncthing_config:/config \
     -e PUID=0 \

wiki/docker/linuxserver_-_tvheadend.md

@@ -1,6 +1,6 @@
 # linuxserver - tvheadend
 
-This is a docker container for a [TVHeadend](../tvheadend.md)
+This is a [Docker](/wiki/docker.md) container for a [TVHeadend](../tvheadend.md)
 server.
 The official container and documentation was made by
 [linuxserver](https://hub.docker.com/r/linuxserver/tvheadend).
@@ -10,7 +10,7 @@ The official container and documentation was made by
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
@@ -22,7 +22,7 @@ docker-compose file.
 | `TZ`                  | specify the timezone        | `Europe/London`         |
 | `RUN_OPTS`          | specify the timezone          | ` `                     |
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -31,7 +31,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | `config`                  | `/config`       | directory for config              |
 | `tvdvr`                   | `/recordings`   | directory for storage             |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -49,7 +49,7 @@ docker pull lscr.io/linuxserver/tvheadend:latest
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "2.1"

wiki/docker/linuxserver_-_wireguard.md

@@ -0,0 +1,96 @@
+# linuxserver - airsonic-advanced
+
+This is a [Docker](/wiki/docker.md) container for a
+[WireGuard](/wiki/wireguard.md) server.
+The official container and documentation was made by
+[linuxserver](https://hub.docker.com/r/linuxserver/wireguard).
+
+## Set-Up
+
+Create the file `rebuild.sh`.
+Change the settings according to your needs.
+Especially change `<VPN.SERVERNAME.COM>` to the URL the VPN is accessible at.
+If not already done set a port forward or something similar.
+`PEERS` is given the number of configs to create for different
+[clients](/wiki/wireguard.md#client).
+It is also possible to give a list of clients separated by commas
+(`first,second,third`) to create.
+The following shows the two options.
+Then run `./rebuild.sh`
+
+### Environment-Variables
+
+Set the following variables with the -e tag.
+
+| Name        | Usage           | Default |
+| ----------- | --------------- | ------- |
+| `PUID`      | UserID          |         |
+| `PGID`      | GroupID         |         |
+| `TZ`        | Timezone        |         |
+| `SERVERURL` | URL of server   |         |
+| `PEERS`     | Number of peers |         |
+
+### Volumes
+
+Set the following volumes with the -v tag.
+
+| Outside mount/volume name | Container mount | Description             |
+| ------------------------- | --------------- | ----------------------- |
+| `wireguard`               | `/config`       | Configuration files     |
+
+### Ports
+
+Set the following ports with the -p tag.
+
+| Container Port | Recommended outside port | Protocol | Description |
+| -------------- | ------------------------ | -------- | ----------- |
+| `51820`        | `51820`                  | UDP      | VPN port    |
+
+### Additional
+
+There are some special variables to set.
+
+| Flag        | Usage                  |
+| ----------- | ---------------------- |
+| `--cap-add` | add linux capabilities |
+
+### rebuild.sh
+
+```sh
+#!/bin/sh
+docker stop wireguard
+docker rm wireguard
+docker pull lscr.io/linuxserver/wireguard:latest
+docker run --name=wireguard \
+  --cap-add=NET_ADMIN \
+  --cap-add=SYS_MODULE \
+  -e PUID=1000 \
+  -e PGID=1000 \
+  -e TZ=Etc/UTC \
+  -e SERVERURL=<VPN.SERVERNAME.COM> \
+  -e PEERS=1 \
+  -p 51820:51820/udp \
+  -v wireguard:/config \
+  --sysctl="net.ipv4.conf.all.src_valid_mark=1" \
+  --restart unless-stopped \
+  -d lscr.io/linuxserver/wireguard:latest
+```
+
+## Usage
+
+### Retrieve Client Certificates by QR-Code
+
+The client certificates can be retrieved with the following command.
+`<peer-number>` is the number or identifier of the peer.
+
+```sh
+docker exec -it wireguard /app/show-peer <peer-number>
+```
+
+After running the command a QR-code should be displayed that describes the
+certificate.
+
+### Add New Client to Existing WireGuard Installation
+
+To add a new client to the existing WireGuard installation increase the number
+of peers or append a peer to the list of peers specified in the [setup section](#set-up) section.

wiki/docker/mailserver_-_docker-mailserver.md

@@ -1,7 +1,8 @@
 # mailserver - docker-mailserver
 
-This is a docker container for a mailserver.
+This is a [Docker](/wiki/docker.md) container for a mailserver.
-The official container and documentation was made by [mailserver](https://hub.docker.com/r/mailserver/docker-mailserver).
+The official container and documentation was made by
+[mailserver](https://hub.docker.com/r/mailserver/docker-mailserver).
 It contains dovecot, antispam, antivirus, ssl, etc.
 
 ## Set-up
@@ -31,9 +32,13 @@ And finally generate the DCIM keys and rebuild once again.
 
 `./setup.sh config dkim`
 
+Finally if a reverse proxy is used check the
+[traefik entry](/wiki/docker/traefik.md#setup-mailserver) or the
+[nginx entry](./nginx.md).
+
 Afterwards you're ready to go by once again running the `rebuild.sh` file.
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/mariadb.md

@@ -1,11 +1,19 @@
 # mariadb
 
-This is a docker container for a mariadb database.
+This is a [Docker](/wiki/docker.md) container for a mariadb database.
 The official container and documentation was made by [mariadb](https://hub.docker.com/_/mariadb).
 The Docker container is mainly used in combination with other containers.
 To achieve this in the easiest way use a docker-compose file.
 
-## Environment-variables
+## Set-Up
+
+The mariadb Docker container is dependent on another container most of the time. 
+The exact setup will be described in the regarding entry.
+Nevertheless both environment variables and volumes are listed in the sections below.
+Nevertheless both environment variables and volumes and networks are listed in the sections below.
+These are needed most often.
+
+### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
@@ -17,10 +25,15 @@ docker-compose file.
 | `MYSQL_PASSWORD`      | set the mysql user password   |         |
 | `MYSQL_Database`      | specify mysql database to use |         |
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
 | Outside mount/volume name | Container mount  | Description               |
 | ------------------------- | ---------------- | ------------------------- |
 | `mysql`                   | `/var/lib/mysql` | storage for owncloud data |
+
+### Networks
+
+You can set networks in the `networks:` part of a docker-compose file to connect
+the database with other docker containers.

wiki/docker/massivedecks_-_client.md

@@ -0,0 +1,97 @@
+# massivedecks - client
+
+This is a [Docker](/wiki/docker.md) container for a [Massive Deecks](/wiki/game/massive_decks.md)
+client.
+Due to ease of use this entry will also feature the server container.
+The official container and documentation was made by
+[Lattyware](https://github.com/Lattyware/massivedecks).
+This docker-rebuild is made up by a `docker-compose.yml` file.
+In addition to the client and server containers a [postgres container](/wiki/docker/postgres.md)
+needs to be connected.
+
+## Set-up
+
+Create the files `rebuild.sh`, `.env` and `docker-compose.yml` at the same
+place.
+Make sure to set `POSTGRES_PASSWORD`.
+Change the settings according to your needs and run `./rebuild.sh` afterwards.
+
+### Ports
+
+Set the following ports in the `ports:` section.
+
+| Container Port | Recommended outside port | Protocol | Description |
+| -------------- | ------------------------ | -------- | ----------- |
+| `8080`         | `8080`                   | TCP      | WebUI       |
+
+### Environment-variables
+
+Set the following environment-variables in the `environment:` section of the
+docker-compose file.
+
+| Name        | Usage                   | Default           |
+| ----------- | ----------------------- | ----------------- |
+| `NODE_ENV`  | Setting the environment | `production`      |
+
+### rebuild.sh
+
+```sh
+#!/bin/sh
+docker-compose down
+docker pull postgres:14
+docker pull ghcr.io/lattyware/massivedecks/server:latest-release
+docker pull ghcr.io/lattyware/massivedecks/client:latest-release
+docker-compose up -d
+```
+
+### docker-compose.yml
+
+```yml
+version: "3.3"
+services:
+  storage:
+    image: "postgres:14"
+    restart: unless-stopped
+    environment:
+      - POSTGRES_USER=massivedecks
+      - POSTGRES_PASSWORD=<password>
+    networks:
+      - internal
+    volumes:
+      - storage-volume:/var/lib/postgresql/data
+
+  server:
+    image: "ghcr.io/lattyware/massivedecks/server:latest-release"
+    restart: unless-stopped
+    environment:
+      - NODE_ENV=production
+    depends_on:
+      - storage
+    networks:
+      - internal
+    configs:
+      - source: md_server_config
+        target: /md/config.json5
+
+  client:
+    image: "ghcr.io/lattyware/massivedecks/client:latest-release"
+    restart: unless-stopped
+    depends_on:
+      - server
+    networks:
+      - internal
+    ports:
+      - "8080:8080"
+
+networks:
+  internal:
+    external: false
+
+volumes:
+  storage-volume:
+    driver: local
+
+configs:
+  md_server_config:
+    external: true
+```

wiki/docker/matrixdotorg_-_synapse.md

@@ -1,6 +1,6 @@
 # matrixdotorg - synapse
 
-This is a docker container for a synapse server using the
+This is a [Docker](/wiki/docker.md) container for a synapse server using the
 [matrix](../matrix.md) protocol.
 The official container and documentation was made by
 [matrixdotorg](https://hub.docker.com/matrixdotorg/synapse).
@@ -11,7 +11,7 @@ This docker-rebuild is made up by a `docker-compose.yml` file.
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
@@ -24,7 +24,7 @@ docker-compose file.
 | `GID`                 | group id for synapse user | `1000`                  |
 | `TZ`                  | specify the timezone      | `Europe/London`         |
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -32,7 +32,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | ------------------------- | --------------- | --------------------------------- |
 | `synapse`                 | `/data`         | directory for storage and configs |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -40,7 +40,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ---------------------- |
 | `8008`         | `443`                    | TCP      | matrix homeserver port |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -49,7 +49,7 @@ docker pull matrixdotorg/synapse:latest
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 services:

wiki/docker/mikenye_-_picard.md

@@ -0,0 +1,61 @@
+# mikenye - airsonic-advanced
+
+This is a [Docker](/wiki/docker.md) container for a
+[Picard](/wiki/picard.md) instance accessible over the web and
+[VNC](/wiki/vnc.md).
+The official container and documentation was made by
+[mikenye](https://github.com/mikenye/docker-picard).
+
+## Set-up
+
+Create the file `rebuild.sh`.
+Change the settings according to your needs and run `./rebuild.sh` afterwards.
+
+### Environment-variables
+
+Set the following variables with the -e tag.
+
+| Name             | Usage               | Default |
+| ---------------- | ------------------- | ------- |
+| `USER_ID`        | UserID              | `1000`  |
+| `GROUP_ID`       | GroupID             | `1000`  |
+| `DISPLAY_WIDTH`  | Width of software   | `1280`  |
+| `DISPLAY_HEIGHT` | Height of software  | `768`   |
+
+### Volumes
+
+Set the following volumes with the -v tag.
+
+| Outside mount/volume name | Container mount | Description               |
+| ------------------------- | --------------- | ------------------------- |
+| `config`                  | `/config`       | Configuration files       |
+| `media_music`             | `/storage`      | Location for audio files  |
+
+### Ports
+
+Set the following ports with the -p tag.
+
+| Container Port | Recommended outside port | Protocol | Description                |
+| -------------- | ------------------------ | -------- | -------------------------- |
+| `5800`         | `5800`                   | TCP      | WebUI                      |
+| `5900`         | `5900`                   | TCP      | VNC                        |
+| `8000`         | `8000`                   | TCP      | Picard browser integration |
+
+### rebuild.sh
+
+```sh
+#!/bin/sh
+docker stop picard
+docker rm picard
+docker pull mikenye/picard
+docker run --name=picard \
+  --restart unless-stopped \
+  -p 5800:5800 \
+  -v media_music:/storage:rw \
+  -v picard_config:/config:rw \
+  -e USER_ID=0 \
+  -e GROUP_ID=0 \
+  -e DISPLAY_WIDTH=2560 \
+  -e DISPLAY_HEIGHT=1440 \
+  -d mikenye/picard
+```

wiki/docker/mysql.md

@@ -1,11 +1,19 @@
 # mysql
 
-This is a docker container for a MySQL database.
+This is a [Docker](/wiki/docker.md) container for a MySQL database.
-The official container and documentation was made by [MySQL](https://hub.docker.com/_/mysql).
+The official container and documentation was made by
+[MySQL](https://hub.docker.com/_/mysql).
 The Docker container is mainly used in combination with other containers.
 To achieve this in the easiest way use a docker-compose file
 
-## Environment-variables
+## Set-Up
+
+The mysql Docker container is dependent on another container most of the time. 
+The exact setup will be described in the regarding entry.
+Nevertheless both environment variables and volumes and networks are listed in the sections below.
+These are needed most often.
+
+### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
@@ -17,7 +25,7 @@ docker-compose file.
 | `MYSQL_PASSWORD`      | set the mysql user password   |         |
 | `MYSQL_Database`      | specify mysql database to use |         |
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -25,7 +33,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | ------------------------- | ---------------- | ------------------------- |
 | `mysql`                   | `/var/lib/mysql` | storage for owncloud data |
 
-## Networks
+### Networks
 
 You can set networks in the `networks:` part of a docker-compose file to connect
 the database with other docker containers.

wiki/docker/nextcloud.md

@@ -1,7 +1,8 @@
 # NextCloud
 
-This is a docker container for [NextCloud](../nextcloud.md).
+This is a [Docker](/wiki/docker.md) container for [NextCloud](../nextcloud.md).
-The official container and documentation was made by [NextCloud](https://hub.docker.com/_/nextcloud).
+The official container and documentation was made by
+[NextCloud](https://hub.docker.com/_/nextcloud).
 This docker-rebuild is made up by a `docker-compose.yml` file.
 The services in this files are explained seperately.
 The main Docker container needs a database in form of a [MariaDB](./mariadb.md)
@@ -11,8 +12,18 @@ Docker container.
 
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
+It is recommended to use the versionnumber instead of `:latest` for both the MariaDB and the
+NextCloud image like the following example.
 
-## Volumes
+```
+nextcloud:22
+mariadb:9
+```
+
+Make sure to substitute all the occurences of the `:latest` tag accordingly.
+Updating has to be done manually so nothing breaks.
+
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -20,7 +31,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | ------------------------- | --------------- | ---------------------------------------- |
 | `nextcloud`               | `/var/www/html` | storage for nextcloud plugins and config |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -28,7 +39,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ----------- |
 | `80`           | `80`                     | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -38,7 +49,7 @@ docker pull mariadb:latest
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: '2'
@@ -49,7 +60,7 @@ volumes:
 
 services:
   db:
-    image: mariadb
+    image: mariadb:latest
     restart: always
     command: --transaction-isolation=READ-COMMITTED --binlog-format=ROW
     volumes:
@@ -61,7 +72,7 @@ services:
       - MYSQL_USER=nextcloud
 
   app:
-    image: nextcloud
+    image: nextcloud:latest
     restart: always
     ports:
       - 8080:80
@@ -80,5 +91,4 @@ volumes:
         driver: local
     nextcloud:
         driver: local
-
 ```

wiki/docker/nginx.md

@@ -1,6 +1,7 @@
 # nginx
 
-This is a docker container for an [nginx server](../nginx.md).
+This is a [Docker](/wiki/docker.md) container for an
+[nginx server](../nginx.md).
 The official container and documentation was made by
 [nginx](https://hub.docker.com/_/nginx).
 This docker-rebuild is made up by a `docker-compose.yml` file.
@@ -10,7 +11,7 @@ This docker-rebuild is made up by a `docker-compose.yml` file.
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -18,7 +19,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | ------------------------- | -------------------- | --------------------------- |
 | `nginx`                   | `/etc/nginx/conf.d/` | directory for nginx configs |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -27,7 +28,7 @@ Set the following ports in the `ports:` section.
 | `80`           | `80`                     | TCP      | http port   |
 | `443`          | `443`                    | TCP      | https port  |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -36,7 +37,7 @@ docker pull nginx:latest
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "2"

wiki/docker/olbat_-_cupsd.md

@@ -1,14 +1,15 @@
 # olbat - cupsd
 
-This is a docker container for a [Cups](../cups.md) server.
+This is a [Docker](/wiki/docker.md) container for a [Cups](../cups.md) server.
-The official container and documentation was made by [olbat](https://hub.docker.com/r/olbat/cupsd).
+The official container and documentation was made by
+[olbat](https://hub.docker.com/r/olbat/cupsd).
 
 ## Set-up
 
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -17,7 +18,7 @@ Set the following volumes with the -v tag.
 | `cups`                    | `/etc/cups`     | configuration for printers, etc |
 | `/var/run/dbus`           | `/var/run/dbus` | connection to host dbus         |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -25,11 +26,11 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------------- |
 | `631`          | `631`                    | TCP      | cups server webui |
 
-## Additional
+### Additional
 
 The default username is `print`, the default password is `print`.
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/ollama_-_ollama.md

@@ -0,0 +1,40 @@
+# ollama - ollama
+
+This is a [Docker](/wiki/docker.md) container for an ollama server.
+The official container and documentation was made by
+[ollama](https://hub.docker.com/r/ollama/ollama).
+
+## Set-up
+
+Create the file `rebuild.sh`.
+Change the settings according to your needs and run `./rebuild.sh` afterwards.
+
+## Ports
+
+Set the following ports in the `ports:` section.
+
+| Container Port | Recommended outside port | Protocol  | Description         |
+| -------------- | ------------------------ | --------- | ------------------- |
+| `11434`        | `11434`                  | TCP       | Communications port |
+
+## Volumes
+
+Set the following volumes with the -v tag.
+
+| Outside mount/volume name | Container mount | Description   |
+| ------------------------- | --------------- | ------------- |
+| `ollama`                  | `/root/.ollama` | Ollama data |
+
+## rebuild.sh
+
+```sh
+#!/bin/sh
+docker stop ollama
+docker rm ollama
+docker pull ollama/ollama
+docker run --name ollama \
+    --restart unless-stopped \
+    -p 11434:11434 \
+    -v ollama:/root/.ollama \
+    -d ollama/ollama
+```

wiki/docker/open-webui_-_open-webui.md

@@ -0,0 +1,41 @@
+# open-webui - open-webui
+
+This is a [Docker](/wiki/docker.md) container for a Open WebUI server.
+The official container and documentation was made by
+[open-webui](https://github.com/open-webui/open-webui).
+
+## Set-up
+
+Create the file `rebuild.sh`.
+Change the settings according to your needs and run `./rebuild.sh` afterwards.
+
+## Ports
+
+Set the following ports in the `ports:` section.
+
+| Container Port | Recommended outside port | Protocol  | Description   |
+| -------------- | ------------------------ | --------- | ------------- |
+| `11434`        | `8080`                   | TCP       | WebUI         |
+
+## Volumes
+
+Set the following volumes with the -v tag.
+
+| Outside mount/volume name | Container mount     | Description     |
+| ------------------------- | ------------------- | --------------- |
+| `open-webui`              | `/app/backend/data` | Open WebUI data |
+
+## rebuild.sh
+
+```sh
+#!/bin/sh
+docker stop openwebui
+docker rm openwebui
+docker pull ghcr.io/open-webui/open-webui:main
+docker run --name openwebui \
+    --restart unless-stopped \
+    -p 11434:8080 \
+    -v open-webui:/app/backend/data \
+    -d ghcr.io/open-webui/open-webui:main
+
+```

wiki/docker/owncloud.md

@@ -1,8 +1,8 @@
 # owncloud
 
-
+This is a [Docker](/wiki/docker.md) container for a [owncloud](../owncloud.md) server.
-This is a docker container for a [owncloud](../owncloud.md) server.
+The official container and documentation was made by
-The official container and documentation was made by [owncloud](https://hub.docker.com/_/owncloud).
+[owncloud](https://hub.docker.com/_/owncloud).
 This docker-rebuild is made up by a `docker-compose.yml` file.
 The services in this files are explained seperately.
 The main Docker container needs a database in form of a [MariaDB](./mariadb.md)
@@ -13,7 +13,7 @@ Docker container.
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -22,7 +22,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | `owncloud`                | `/var/www/html`        | storage for owncloud plugins |
 | `config`                  | `/var/www/html/config` | storage for owncloud config  |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -30,7 +30,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ----------- |
 | `80`           | `80`                     | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -40,7 +40,7 @@ docker pull mariadb
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "3.1"

wiki/docker/oznu_-_docker-cloudflare-ddns.md

@@ -1,14 +1,16 @@
 # oznu - docker-cloudflare-ddns
 
-This is a docker container for dynamically updating cloudflare dns entries.
+This is a [Docker](/wiki/docker.md) container for dynamically updating
-The official container and documentation was made by [oznu](https://github.com/oznu/docker-cloudflare-ddns).
+cloudflare dns entries.
+The official container and documentation was made by
+[oznu](https://github.com/oznu/docker-cloudflare-ddns).
 
 ## Set-up
 
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment variables
+### Environment variables
 
 Set the following variables with the -e tag.
 
@@ -18,7 +20,7 @@ Set the following variables with the -e tag.
 | `ZONE=`       | append your domain (for example `main.com`)            |
 | `SUBDOMAIN`   | append your subdomain (for example `dynamic`)          |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/oznu_-_onedrive.md

@@ -8,7 +8,7 @@ The official container and documentation was made by [oznu](https://hub.docker.c
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following variables with the -e tag.
 
@@ -17,7 +17,7 @@ Set the following variables with the -e tag.
 | `PUID` | UserID  |         |
 | `PGID` | GroupID |         |
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -26,7 +26,7 @@ Set the following volumes with the -v tag.
 | `onedrive_config`         | `/config`       | configuration storage for the server connection |
 | `onedrive_doc`            | `/documents`    | storage for downloaded documents                |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/portainer_-_agent.md

@@ -1,14 +1,16 @@
 # portainer - agent
 
-This is a docker container for a [portainer](../portainer.md) agent.
+This is a [Docker](/wiki/docker.md) container for a [portainer](../portainer.md)
-The official container and documentation was made by [portainer](https://hub.docker.com/r/portainer/agent).
+agent.
+The official container and documentation was made by
+[portainer](https://hub.docker.com/r/portainer/agent).
 
 ## Set-up
 
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -17,7 +19,7 @@ Set the following volumes with the -v tag.
 | `/var/run/docker.sock`    | `/var/run/docker.sock`    | connect your running docker containers |
 | `/var/lib/docker/volumes` | `/var/lib/docker/volumes` | connect running docker volumes         |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -25,7 +27,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | -------------------- |
 | `9001`         | `9001`                   | TCP      | Portainer agent port |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/portainer_-_portainer.md

@@ -1,14 +1,16 @@
 # portainer - portainer
 
-This is a docker container for a [portainer](../portainer.md) server.
+This is a [Docker](/wiki/docker.md) container for a [portainer](../portainer.md)
-The official container and documentation was made by [portainer](https://hub.docker.com/r/portainer/portainer).
+server.
+The official container and documentation was made by
+[portainer](https://hub.docker.com/r/portainer/portainer).
 
 ## Set-up
 
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -17,7 +19,7 @@ Set the following volumes with the -v tag.
 | `portainer`               | `/data`                | configuration directory                           |
 | `/var/run/docker.sock`    | `/var/run/docker.sock` | connection to local docker containers and volumes |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -25,7 +27,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `9000`         | `9000`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/postgres.md

@@ -1,11 +1,20 @@
-# Postgres
+# postgres
 
-This is a docker container for a postgresql database.
+This is a [Docker](/wiki/docker.md) container for a [postgresql database](/wiki/postgresql.md).
-The official container and documentation was made by [Postgres](https://hub.docker.com/_/postgres).
+The official container and documentation was made by
+[Postgres](https://hub.docker.com/_/postgres).
 The Docker container is mainly used in combination with other containers.
 To achieve this in the easiest way use a docker-compose file
 
-## Environment-variables
+## Set-Up
+
+The postgres Docker container is dependent on another container most of the time. 
+The exact setup will be described in the regarding entry.
+Nevertheless both environment variables and volumes are listed in the sections below.
+Nevertheless both environment variables and volumes and networks are listed in the sections below.
+These are needed most often.
+
+### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
@@ -17,7 +26,7 @@ docker-compose file.
 | `POSTGRES_PASSWORD`      | set the postgres user password   |         |
 | `POSTGRES_DB`            | specify postgres database to use |         |
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -26,7 +35,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | `postgres`                | `/var/lib/postgresql/data` | storage for owncloud data    |
 | `postgres_config`         | `/config/sql`              | initial sql setup and config |
 
-## Networks
+### Networks
 
 You can set networks in the `networks:` part of a docker-compose file to connect
 the database with other docker containers.

wiki/docker/prologic_-_golinks.md

@@ -1,7 +1,7 @@
 # prologic - golinks
 
-This is a docker container for golinks, a web app to create bookmarks,
+This is a [Docker](/wiki/docker.md) container for golinks, a web app to create
-commands and aliases.
+bookmarks, commands and aliases.
 The official container and documentation was made by
 [prologic](https://git.mills.io/prologic/golinks).
 
@@ -10,7 +10,7 @@ The official container and documentation was made by
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -18,7 +18,7 @@ Set the following volumes with the -v tag.
 | ------------------------- | --------------- | -------------------------- |
 | `golinks`                 | `/search.db`    | database with all commands |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -26,7 +26,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `8000`         | `8000`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -35,7 +35,7 @@ docker pull prologic/golinks:latest
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "3.1"