template: improved template

minecraft: added mod guide to docker image
audio: added and linked openaudible
package managers: added version-specific installation of AUR and manual installation of PKGBUILD

.gitignore

@@ -0,0 +1 @@
+*.pdf

README.md

@@ -3,4 +3,3 @@
 This is a wiki for guides and tips for using various software, operating system
 and tech related stuff.
 Many of the linux related articles and guides can be found in use at my [dotfiles](https://github.com/tiyn/dotfiles).
-

templates/android-program.md

@@ -0,0 +1,14 @@
+# /name/
+
+[/name/]() is a /description.
+
+## Setup
+
+On [Android](/wiki/android.md) /name/ is available on 
+[F-Droid](/wiki/android/f-droid.md)/the [Google Play store](/wiki/android.md#app-store) in a
+package called [/name/]().
+
+## Usage
+
+This section addresses the usage of /name/.
+/basic description for usage/

templates/docker-compose.md

@@ -0,0 +1,61 @@
+# /maintainer/ - /name/
+
+This is a [Docker](/wiki/docker.md) container for a /service/ server.
+The official container and documentation was made by
+[/maintainer/]().
+This docker-rebuild is made up by a `docker-compose.yml` file.
+In addition to the main container you need to connect a
+[/additional containers needed/]() to it.
+
+## Set-up
+
+Create the files `rebuild.sh`, `.env` and `docker-compose.yml` at the same
+place.
+Change the settings according to your needs and run `./rebuild.sh` afterwards.
+
+### Environment-variables
+
+Set the following variables in the `environment:` section.
+
+| Name       | Usage         | Default |
+| ---------- | ------------- | ------- |
+| `/name/`   | /description/ |         |
+
+<!-- ### Environment-variables -->
+<!---->
+<!-- The environment variables are set via the `.env` file and listed in the -->
+<!-- [corresponding section](#env). -->
+<!---->
+### Ports
+
+Set the following ports in the `ports:` section.
+
+| Container Port | Recommended outside port | Protocol  | Description   |
+| -------------- | ------------------------ | --------- | ------------- |
+| `/port/`       | `/port/`                 | /TCP/UDP/ | /description/ |
+
+### Volumes
+
+Set the following volumes with the -v tag.
+
+| Outside mount/volume name | Container mount | Description   |
+| ------------------------- | --------------- | ------------- |
+| `/volume name/`           | `/mount point/` | /description/ |
+
+### rebuild.sh
+
+```sh
+#!/bin/sh
+docker-compose down
+docker-compose up -d
+```
+
+<!-- ### .env -->
+<!---->
+<!-- ```sh -->
+<!-- ``` -->
+<!---->
+### docker-compose.yml
+
+```yml
+```

templates/docker.md

@@ -0,0 +1,39 @@
+# /maintainer/ - /name/
+
+This is a [Docker](/wiki/docker.md) container for a /service/ server.
+The official container and documentation was made by
+[/maintainer/]().
+
+## Set-up
+
+Create the file `rebuild.sh`.
+Change the settings according to your needs and run `./rebuild.sh` afterwards.
+
+## Environment-variables
+
+Set the following variables with the -e tag.
+
+| Name       | Usage         | Default |
+| ---------- | ------------- | ------- |
+| `/name/`   | /description/ |         |
+
+## Ports
+
+Set the following ports in the `ports:` section.
+
+| Container Port | Recommended outside port | Protocol  | Description   |
+| -------------- | ------------------------ | --------- | ------------- |
+| `/port/`       | `/port/`                 | /TCP/UDP/ | /description/ |
+
+## Volumes
+
+Set the following volumes with the -v tag.
+
+| Outside mount/volume name | Container mount | Description   |
+| ------------------------- | --------------- | ------------- |
+| `/volume name/`           | `/mount point/` | /description/ |
+
+## rebuild.sh
+
+```sh
+```

templates/program.md

@@ -0,0 +1,19 @@
+# /name/
+
+[/name/]() is a /description.
+
+## Setup
+
+The /name/ program can be installed [/via GitHub/]().
+Alternatively many [Linux](/wiki/linux.md) [package managers](/wiki/linux/package_manager.md) 
+package /name/ in the `/package/`.
+The software can be setup via [Docker](/wiki/docker.md) with the [/docker name/ image]().
+
+## Usage
+
+This section addresses the usage of /name/.
+/basic description for usage/
+
+## Troubleshooting 
+
+This section will focus on errors and the fixing of errors of /name/.

wiki/acer.md

@@ -0,0 +1,13 @@
+# Acer
+
+[Acer](https://www.acer.com) is a company that produces computers.
+
+## Troubleshooting 
+
+This section focusses on vendor specific problems and ways how to fix them.
+
+### Recovering the BIOS Password 
+
+Acer laptops usually feature a 8-digit BIOS password.
+If it was lost it can easily be regenerated/recovered by using the website
+[BIOSBug](https://www.biosbug.com/acer).

wiki/airsonic-advanced.md

@@ -36,7 +36,8 @@ Log in with the clients now works correctly.
 
 It is possible to use many different clients because the server is compatible
 with all the Subsonic clients.
-These can be found in the [Subsonic entry](./subsonic.md#clients).
+These can be found in the [Subsonic entry](./subsonic.md#clients) and the [Airsonic
+entry](/wiki/airsonic.md#clients).
 
 ## Scrobbling with Last.fm
 

wiki/airsonic.md

@@ -17,3 +17,6 @@ The software can be setup via [Docker](/wiki/docker.md) with the
 It is possible to use many different clients because the server is compatible
 with all the Subsonic clients.
 These can be found in the [Subsonic entry](./subsonic.md#clients).
+
+Additionally to these clients there is an improved web user interface made by tamland called
+[airsonic-refix](https://github.com/tamland/airsonic-refix).

wiki/android.md

@@ -3,3 +3,134 @@
 [Android](https://www.android.com/) is a mobile operating system based on a modified
 [Linux](/wiki/linux.md) kernel.
 It is designed primarily for mobile devices with touch screens like tablets or smart phones.
+
+## Managing the Data
+
+The data and files stored on Android
+[smart devices](/wiki/smart_device.md#smartphones-and-tablet-computers) are sometimes needed on
+computers.
+
+For [Windows](/wiki/windows.md) this can easily be achieved by connecting it via USB.
+No further software is needed as the device manager handles the phone correctly most of the times.
+
+For [Linux-based systems](/wiki/linux.md) the
+[device](/wiki/smart_device.md#smartphones-and-tablet-computers) also has to be connected to the
+computer.
+But in this case also a software is needed to [mount it](/wiki/linux/disk-management.md#mounting),
+this software/program is called [android-file-transfer](/wiki/linux/android-file-transfer.md).
+For further information and a guide on how to mount a Android device correctly navigate to the
+[corresponding section](/wiki/linux/android-file-transfer.md#mounting-and-unmounting-android-device).
+
+## App Store
+
+The most used app store of android is the [Google Play Store](https://play.google.com/).
+A free and open-source alternative to it is [F-Droid](/wiki/android/f-droid.md) which only features
+open-source software.
+
+A list of open-source software options is also available on Alberto Mosconis
+[Github](/wiki/git_%28general%29.md#server-with-web-interface) repository
+[foss apps](https://github.com/albertomosconi/foss-apps/tree/main).
+
+Additionally open-source apps can be installed from source using
+[Obtainium](https://github.com/ImranR98/Obtainium).
+
+### Useful Applications
+
+This section addresses various useful applications.
+
+- [Arcticons](https://github.com/Donnnno/Arcticons) a mono-color line-based icon pack
+- [disky](https://github.com/newhinton/disky) is a filesystem analyzer that shows usage of the
+  storage.
+- [Markor](https://github.com/gsantner/markor) is a text editor supporting
+  [Markdown](/wiki/markup_language.md)
+- [SystemUI Tuner](https://play.google.com/store/apps/details?id=com.zacharee1.systemuituner) is an
+  application that allows various small tweaks for the Android user interface.
+- [SimpleMarkdown](https://f-droid.org/packages/com.wbrawner.simplemarkdown.free/) is another text
+  editor made for Markdown. It does work a bit better with a [NextCloud](/wiki/nextcloud.md).
+
+## Improve Security and Privacy
+
+Security and privacy are important topics, especially so when dealing with mobile phones.
+This section focusses on improving them on a standard Android system.
+
+The Elecronic Frontier Foundation recommends the following changes in their guide 
+[Guide](https://ssd.eff.org/module/how-to-get-to-know-android-privacy-and-security-settings).
+
+- [2FA](#multi-factor-authentication)
+- A strong password (though the usage of biometrics is not recommended due to the possibility of
+  being physically forced to unlock a phone with them)
+- Privacy permission
+- Find my device
+- Theft protection
+- Google privacy checkup
+- Backups (though the usage of them gives data to Google, so it may rather be turned off)
+- Disable WEP networks
+- Obscure lockscreen notifications
+
+The YouTube Channel 9to5Google also has a 
+[video on security and privcacy](https://www.youtube.com/watch?v=eswIeNxSIqo) which additionally
+suggest the following changes.
+
+- Alert when clipboard is accessed
+- Enable app pinnig
+
+Another option to add which may not improve security or privacy but improves usability - especially
+if a difficult passphrase is used - is the enabling of "Extend Unlock".
+There "Trusted Devices" can be set or the "On-body Detection" can be enabled.
+
+## Multi-Factor Authentication
+
+[Multi-factor authentication](/wiki/multi-factor_authentication.md) can easily be set up on android
+systems.
+For this the arguably most used app is
+[Google Authenticator](https://play.google.com/store/apps/details?id=com.google.android.apps.authenticator2&hl=de&gl=US).
+A free and open-source alternative for it is FreeOTP+.
+This app is available at [F-Droid](/wiki/android/f-droid.md) as
+[FreeOTP+](https://f-droid.org/de/packages/org.liberty.android.freeotpplus/) and on
+[Google Play Store](#app-store) by the
+[same name](https://f-droid.org/de/packages/org.liberty.android.freeotpplus/).
+
+## Custom ROMs
+
+Besites the stock-firmware of vendors there are also custom ROMs.
+These are alternative firmware variants made by third party providers.
+A well known custom ROM is [LineageOS](/wiki/android/lineageos.md).
+
+It is possible that some custom ROMs require the user to
+[unlock the bootloader](#unlocking-the-bootloader) before the installation can happen.
+
+## Unlocking the Bootloader
+
+Unlocking the bootloader can be a bit challenging for some vendors especially.
+
+For [smartphones and tablets](/wiki/smart_device.md#smartphones-and-tablet-computers) made by
+Xiaomi there are some steps that have to be done to unlock the bootloader.
+This section is based on an
+[article about unlocking the bootloader](https://new.c.mi.com/global/post/101245) on Xiaomi
+Community aswell as another
+[article on specifics for HyperOS](https://xiaomiui.net/how-unlock-bootloader-xiaomi-hyperos-53493/).
+First the user has to apply to unlock the bootloader.
+For this open the Xiaomi Community app, navigate to the "Settings" and select "Change region".
+Select the region "Global".
+A new option called "Unlock bootloader" now appears in the settings.
+Select "Unlock bootloader" and "Apply for unlocking".
+It may be possible that a specified time has to be waited for the application process to happen.
+Next go to the phones settings.
+Navigate to "About Phone" and "MIUI Version", repeatedly tap on "MIUI version" to get into
+developer mode if the phone is not already in developer mode.
+Navigate to "Additional settings" and "Developer options".
+Enable "OEM unlocking" and "USB debugging".
+Now add your Xiaomi account to your device.
+To do so navigate to "Mi Unlock status" and agree then "Add account and device".
+Shutdown your phone and boot into "Fastboot" by holding down the volume down button and the power
+button.
+Then connect it to a computer via USB.
+The following steps have to take place on a [Windows](/wiki/windows.md) system or an emulation or
+virtualization of it.
+Download and start "Mi Unlock" - it is available on the
+[article mentioned prior in this section](https://new.c.mi.com/global/post/101245).
+Follow the steps of the software, select "Unlock" and confirm it multiple times.
+It is possible that now 72 hours have to pass for the unlocking process to continue.
+If that is the case wait the specified amount of time and repeat the last step.
+Make sure to not apply for unlocking again and do not add your account to your phone again as this
+will reset the timer.

wiki/android/droidcam.md

@@ -0,0 +1,34 @@
+# DroidCam
+
+[DroidCam](https://www.dev47apps.com/) is an App developed and published
+by Dev47Apps for [Android](/wiki/android.md) systems.
+It enables a [smartphone](/wiki/smart_device.md) to be used as [webcam](/wiki/webcam.md).
+
+## Setup
+
+DroidCam needs to be set up on the phone aswell as on the computer to be used.
+
+On [Android](/wiki/android.md) DroidCam is available on the
+[Google Play Store](/wiki/android.md#app-store) in a package called
+[DroidCam Webcam](https://play.google.com/store/apps/details?id=com.dev47apps.droidcam).
+
+On the computer setup files for both [Linux](/wiki/linux.md) and [Windows](/wiki/windows.md) can be
+found on the [official website](https://www.dev47apps.com/).
+Alternatively most [Linux systems](/wiki/linux/package_manager.md) feature a package named
+`droidcam`.
+
+## Usage
+
+To initiate a connection between the [smartphone](/wiki/smart_device.md) and the computer first
+start the app on the smartphone.
+Make sure to be connected to the same W-LAN as the computer or alternatively connect them with an
+USB-cable.
+After starting the application an IP and a port will be displayed.
+These have to be pasted into the form that is shown on the computer after starting the corresponding
+program.
+After pressing `Connect` the link will be established.
+The [video feed](/wiki/webcam.md) can then be used in other programs such as Discord or
+[Matrix](/wiki/matrix.md).
+Additionally it can be piped into [OBS](/wiki/obs.md) to edit it more or create a scene.
+Despite the option the separate app [DroidCam OBS](https://www.dev47apps.com/obs/) is not
+necessarily needed.

wiki/android/gadgetbridge.md

@@ -3,13 +3,13 @@
 [Gadgetbridge](https://codeberg.org/Freeyourgadget/Gadgetbridge/) is a free and open source software
 for [Android](/wiki/android.md) systems.
 It is a cloudless replacement for proprietary software for
-[smart devices](/wiki/smart_devices.md), but is especially designed for
-[smartwatches and smart bands](/wiki/smart_devices.md#smartwatches-and-smart-bands).
+[smart devices](/wiki/smart_device.md), but is especially designed for
+[smartwatches and smart bands](/wiki/smart_device.md#smartwatches-and-smart-bands).
 
 ## Setup
 
-To install F-Droid simply download and install the
-[package](https://f-droid.org/packages/nodomain.freeyourgadget.gadgetbridge/).
+Gadgetbridge is available on [F-Droid](/wiki/android/f-droid.md) in a package called
+[gadgetbridge](https://f-droid.org/packages/nodomain.freeyourgadget.gadgetbridge/).
 
 ## Usage
 
@@ -42,16 +42,25 @@ Afterwards the device will be paired and connected.
 ### Add Weather Function
 
 For correct displaying of weather data an additional app is needed.
-An example for this is the
-[Weather notification app](https://f-droid.org/en/packages/ru.gelin.android.weather.notification/).
-Install it, check the Gadgetbridge option inside the Weather notification app to on and set the
-location.
-Finally create an account at [OpenWeather](https://home.openweathermap.org).
-On that website create an API key and paste it into the according setting in the Weather
-notification app.
-Finally set the desired location in the Gadgetbridge app inside the settings.
+This section is based on the official documentation and recommendation that can be found on
+[Gadgetbridges Codeberg page](https://codeberg.org/Freeyourgadget/Gadgetbridge/wiki/Weather#user-content-install-and-configure-openweatherprovider).
+
+An example for this is the [Breezy Weather app](https://github.com/breezy-weather/breezy-weather)
+which is available on the F-Droid store.
+Install and configure it to your needs.
+Then check the Gadgetbridge option insdie the Breezy Weather app.
 Afterwards the weather function will be working.
 
+In the past an application named
+[Weather Notification](https://f-droid.org/en/packages/ru.gelin.android.weather.notification/)
+was often used.
+The installation and configuration process was similar but an
+[OpenWeather](https://home.openweathermap.org)  API key had to be specified in the Weather
+Notification app.
+For this an account on [OpenWeather](https://home.openweathermap.org) was needed.
+Due to different API versions Weather Notification currently does not work.
+However it is possible that an update to the application will bring a fix in the future.
+
 ### Install Watchfaces
 
 Watchfaces can be installed by using Gadgetbridges `File Installer` option that is available in the
@@ -60,3 +69,13 @@ Watchface files for Xiaomi/Amazfit devices can be downloaded on
 [amazfitwatchfaces.com](https://amazfitwatchfaces.com/).
 The same catalog is also available as an
 [Android app on the Google Play Store](https://play.google.com/store/apps/details?id=com.amazfitwatchfaces.st).
+
+This section is based on a 
+[Reddit post by myhairisawesome](https://www.reddit.com/r/Huawei/comments/1dexenl/watch_fit_3_is_there_a_way_to_create_custom_watch/).
+
+### Download Maps
+
+To download one or more map files to display them for activity GPS data on the mobile phone
+navigate to the main `Settings`.
+Then Select `Maps` and set the `Folder` aswell as download the map and move it into the selected
+folder.

wiki/android/ip_webcam.md

@@ -0,0 +1,41 @@
+# IP Webcam
+
+[IP Webcam](https://play.google.com/store/apps/details?id=com.pas.webcam&hl=de&gl=US) is an App
+developed and published by Pavel Khlebovich for [Android](/wiki/android.md) systems.
+It enables a [smartphone](/wiki/smart_device.md) to be used as [webcam](/wiki/webcam.md).
+
+When wanting to stream the screen and not the camera the application
+[ScreenStream](/wiki/android/screenstream.md) can be used.
+
+## Setup
+
+On [Android](/wiki/android.md) IP Webcam is available on the
+[Google Play Store](/wiki/android.md#app-store) in a package called
+[IP Webcam](https://play.google.com/store/apps/details?id=com.pas.webcam&hl=de&gl=US).
+
+## Usage
+
+To initiate a connection between the [smartphone](/wiki/smart_device.md) and the computer first
+start the app on the smartphone.
+Make sure to be connected to the same W-LAN as the computer or alternatively connect them with an
+USB-cable.
+After starting the application an IPv4 link be displayed.
+This link can be pasted into a [browser](/wiki/web_browser.md).
+There the video aswell as various settings will be available.
+An example link will look like the following.
+
+```txt
+http://192.168.178.66:8080
+```
+
+Additionally it can be piped into [OBS](/wiki/obs.md) to edit it or into
+[ffmpeg](/wiki/linux/ffmpeg.md) on [Linux](/wiki/linux.md) systems to create a virtual webcam
+device as explained in the
+[ffmpeg entry](/wiki/linux/ffmpeg.md#create-a-virtual-camera-using-an-ip-video-stream).
+The link used for applications like this will be the previously displayed IPv4 link aswell as an
+appended `/videofeed`.
+An example link will look like the following.
+
+```txt
+http://192.168.178.66:8080/videofeed
+```

wiki/android/ir_remote.md

@@ -0,0 +1,20 @@
+# IR Remote
+
+[IR Remote](https://gitlab.com/divested-mobile/irremote) is a free and open-source App developed
+for [Android](/wiki/android.md) systems.
+It can use a [smartphone](/wiki/smart_device.md#smartphones-and-tablet-computers) that is capable
+of sending [infrared](/wiki/infrared.md) signals to be used as an
+[infrared remote control](/wiki/infrared.md#remote-controls)
+
+## Setup
+
+On [Android](/wiki/android.md) IR Remote is available on the
+[F-Droid app store](/wiki/android/f-droid.md) in a package called
+[IR Remote](https://f-droid.org/de/packages/us.spotco.ir_remote/).
+
+## Usage
+
+IR Remote features many preset remote controls for devices of major brands.
+For devices not included in these presets the infrared codes can be searched on the web.
+The [infrared article](/wiki/infrared.md) features a
+[list of available resources](/wiki/infrared.md#remote-controls).

wiki/android/launcher.md

@@ -0,0 +1,13 @@
+# Launcher
+
+A launcher is the software that controls the home screen and app drawer on an
+[Android](/wiki/android.md) phone.
+
+## Software Options
+
+This section lists various possible launchers.
+
+- [Kvaesitso](https://kvaesitso.mm20.de/) is a free and open-source launcher.
+  It is available on [F-Droid](/wiki/android/f-droid.md) from its
+  [repository](https://f-droid.org/de/packages/de.mm20.launcher2.release/).
+  It focusses on a search but also has the option to label apps with tags.

wiki/android/lineageos.md

@@ -0,0 +1,22 @@
+# LineageOS
+
+[LineageOS](https://lineageos.org/) - or short Lineage - is a custom
+[Android](/wiki/android.md)-ROM and operating system for
+[Smartphones and Tablets](/wiki/smart_device.md#smartphones-and-tablet-computers) with mostly free
+and open-source software.
+It was formerly known as CyanogenMod.
+
+## Compatible Devices and Installation
+
+Lineage is only available on specific devices that feature a maintained build of LineageOS.
+A list of compatible devices sorted by vendor can be found on the
+[official wiki](https://wiki.lineageos.org/devices/).
+
+For installation navigate to the [official wiki](https://wiki.lineageos.org/devices/) and select
+the device LineageOS should be installed on.
+A guide will be available to help users in the process of installation.
+The device page also features any build file needed for the setup.
+If Google Services should be installed on the device close attention has to be payed in the guide
+section called "Installing Add-Ons".
+The Google Apps packages for Lineage can be downloaded from the
+[corresponding wiki page](https://wiki.lineageos.org/gapps/).

wiki/android/scrcpy.md

@@ -0,0 +1,20 @@
+# scrcpy
+
+[scrcpy](https://scrcpy.org/) is an application that allows remote
+mirroring of an [Android phones](/wiki/android.md) screen aswell as controlling it.
+
+## Setup
+
+scrcpy needs to be set up on the computer that displays the mirror of the smartphone used.
+
+Setup files for [Windows](/wiki/windows.md) can be found on the
+[official website](https://scrcpy.org/download/).
+Alternatively most [Linux systems](/wiki/linux/package_manager.md) feature a package named
+`scrcpy`.
+
+## Usage
+
+Connect the phone which is to be controlled with the computer via USB.
+Make sure USB debugging is enabled in the phones setting.
+Afterwards start up scrcpy.
+It is possible that debugging has to be confirmed on the phone again after starting the application.

wiki/android/screenstream.md

@@ -0,0 +1,13 @@
+# ScreenStream
+
+[ScreenStream](https://f-droid.org/de/packages/info.dvkr.screenstream/) is an application that
+allows to stream the screen via HTTP.
+
+When wanting to stream the camera and not the screen the application
+[IP Webcam](/wiki/android/ip_webcam.md) can be used.
+
+## Setup
+
+On [Android](/wiki/android.md) ScreenStream is available on 
+[F-Droid](/wiki/android/f-droid.md) in a package called
+[ScreenStream](https://f-droid.org/de/packages/info.dvkr.screenstream/).

wiki/android/tasker.md

@@ -0,0 +1,38 @@
+# Tasker
+
+[Tasker](https://tasker.joaoapps.com/) is a tool to automate various settings and other things on
+an [Android-phone](/wiki/android.md).
+
+## Setup
+
+On [Android](/wiki/android.md) /name/ is available on the
+[Google Play store](/wiki/android.md#app-store) in a package called
+[Tasker](https://play.google.com/store/apps/details?id=net.dinglisch.android.taskerm).
+
+Additionally the installation of [Tasker Settings](https://github.com/joaomgcd/TaskerSettings) is
+recommended.
+Please note that on the [Github releases page](https://github.com/joaomgcd/TaskerSettings/releases)
+there are different versions to be used with Xiaomi-phones.
+
+Another recommended action to be taken is to grant Tasker permission to write secure settings.
+This has to be done for Tasker to be able to turn on or off Wifi and Location.
+Allowing Tasker to set these settings can be done by the following command that has to be run on a
+computer with the corresponding phone connected via USB and USB-debugging enabled.
+
+```sh
+adb shell pm grant net.dinglisch.android.taskerm android.permission.WRITE_SECURE_SETTINGS
+```
+
+`adb` is also often used to install [LineageOS](/wiki/android/lineageos.md).
+
+## Usage
+
+This section addresses the usage of Tasker.
+
+On Tasker profiles, tasks and more can be manually added and edited.
+An easier way to get things started is importing premade Tasker projects from
+[TaskerNet](https://taskernet.com/?public).
+
+Recommended TaskerNet-projects are the following.
+
+- Flip To Shhh

wiki/audio.md

@@ -10,8 +10,67 @@ Podcasts need a so called Podcatcher.
 A Podcatcher is used to subscribe to podcasts and download them automatically.
 For Linux specific music software navigate to the corresponding
 [wiki entry](/wiki/linux/audio.md).
-For voice based communication navigate to the [Communication article](/wiki/communication.md) and
-the corresponding [VoIP section](/wiki/communication.md#voip).
+For voice based communication, social platforms or messengers navigate to the
+[communication article](/wiki/communication.md) and the corresponding
+[section](/wiki/communication.md#social-platforms-messengers-and-voip-services).
+For headphones navigate to the [headphones article](/wiki/headphones.md):
+
+## Technical Specifications
+
+This section aswell as its subsections address all technical things about audio, like connections,
+cables and devices.
+The most frequently used audio formats are also addressed.
+
+### Balanced & Unbalanced Audio
+
+Unbalanced audio uses a wire for the positive signal for audio transmission and one for ground.
+This is the most frequently used type of cable bound audio transmission.
+Usually they are connected with jack connections like 3.5mm and 6.25mm.
+
+Balanced audio uses one wire for the positive signal, one for negative and another one for the
+ground.
+Due to this extra cable a balanced connection can cancel out noise that entered the cable and
+affected both the positive and the negative signal.
+Balanced uses connectors like 4-pin XLR aswell as 2.5mm and 4.4mm jacks
+
+### Audio Formats and Encoding
+
+An audio format is an encoding of an audio file.
+There are lossy and lossless formats, the latter not compromising quality for
+smaller file sizes.
+Following is a list of often used formats:
+
+- wav is an uncompressed lossless format
+- aiff is an uncompressed lossless format
+- [flac](./flac_(codec).md) is a compressed lossless format
+- alac is a compressed lossless format
+- ape is a compressed lossless format
+- mp3 is a compressed lossy codec
+- aac is a compressed lossy codec
+- wma is a compressed lossy codec
+- ac3 is a compressed lossy codec usually found in DVDs
+- dts is a compressed lossy codec usually found in DVDs
+
+Music files can either be encoded lossy or lossless.
+Lossless formats can be converted from and to each other without loosing
+information.
+Lossless formats can also be converted to lossy formats to make the files
+smaller and save space.
+Files should not be converted to lossy formats more than once.
+Additionally lossy formats should not be converted to lossless formats as it
+increases the file size without adding any audio information.
+These not recommended conversions are called bad conversions.
+
+### Cue Files
+
+`.cue` files act as a table of contents for a CD rip.
+These can be created when the
+[audio of a CD is extracted](#extract-audio-files-from-cds).
+Usually this appears together with a single file for the whole CD.
+The audio file can then be split according to the `.cue` file.
+For splitting of `.flac` files on a Linux system check the
+[a flac (package) entry](/wiki/linux/flac_(package).md#splitting-flac-file-according-to-cue-file)
+for further informations.
 
 ## Media Software
 
@@ -19,6 +78,14 @@ If you want to keep your system clean of much data, you can use this kind of
 setup.
 There are differences depending on your preffered software interface.
 
+### Digital Audio Workstations
+
+Digital Audio Workstations - short DAWs - is an application that can be used to record, edit or
+produce audio files.
+
+- [LMMS](https://lmms.io/) is a free and cross-platform DAW that is highly compatible with
+  [Linux-based systems](/wiki/linux.md).
+
 ### Software for Music/Podcasts/Audiobooks
 
 The following is a list of server software, that is featured in this wiki.
@@ -40,37 +107,24 @@ The corresponding client software is handled in the server softwares wiki entry.
   It is self-hostable and can be dockerized.
   It has a web-interface and does not feature client software.
 
-## Audio Formats
+#### Obtaining Audio Files from Different Services
 
-An audio format is an encoding of an audio file.
-There are lossy and lossless formats, the latter not compromising quality for
-smaller file sizes.
-Following is a list of often used formats:
+[YouTube](/wiki/youtube.md) features a wide variety of uploaded music and audiobooks.
+Using programs like [yt-dl](/wiki/youtube.md#downloading-youtube-videos) they can be downloaded.
 
-- wav is an uncompressed lossless format
-- aiff is an uncompressed lossless format
-- [flac](./flac_(codec).md) is a compressed lossless format
-- alac is a compressed lossless format
-- ape is a compressed lossless format
-- mp3 is a compressed lossy codec
-- aac is a compressed lossy codec
-- wma is a compressed lossy codec
-- ac3 is a compressed lossy codec usually found in DVDs
-- dts is a compressed lossy codec usually found in DVDs
+[Audible](https://www.audible.de/) is a popular service that makes sells audibooks.
+After purchasing an audiobook it can be downloaded directly from Audible after navigating to the
+`Library` tab and selecting `Download`.
+Another option is to use [OpenAudible](/wiki/openaudible.md).
+This program features various functions to manage Audible audiobooks that include download,
+converting and splitting.
 
-### Lossy and Lossless Formats and Their Conversion
+## Digitalizing and Analyzing Physical Mediums
 
-Music files can either be encoded lossy or lossless.
-Lossless formats can be converted from and to each other without loosing
-information.
-Lossless formats can also be converted to lossy formats to make the files
-smaller and save space.
-Files should not be converted to lossy formats more than once.
-Additionally lossy formats should not be converted to lossless formats as it
-increases the file size without adding any audio information.
-These not recommended conversions are called bad conversions.
+This section focusses on physical audio mediums like CDs, their digitalization to a digital audio
+file of [specific format](#audio-formats-and-encoding) and conversions between them.
 
-#### Detect Bad Conversions
+### Detect Bad Conversions
 
 The bitrate, format and the sample rate can be usually checked with simple
 tools.
@@ -78,7 +132,7 @@ For Linux a simple software solution for this is the `file` command.
 Running it will display these features of a given audio file.
 This will however only display the format features.
 Bad convserions as described in
-[the previous section](#lossy-and-lossless-formats-and-their-conversion) can not
+[the previous section](#audio-formats-and-encoding) can not
 be detected by this.
 A spectral analysis can detect bad conversions.
 For this a audio analyzer like
@@ -91,7 +145,7 @@ If the frequency extends up to at least 22kHz the file is lossless for sure.
 If the frequency is cut before and the file is encoded in a lossless file it has
 undergone a bad conversion and is not really lossless.
 
-## Extract Audio Files from CDs
+### Extract Audio Files from CDs
 
 You can convert your CDs to files on your computer.
 This way you don't have to search for your CDs all the time.
@@ -106,20 +160,20 @@ This way you don't have to search for your CDs all the time.
 - [MusicBrainz Picard](./picard.md) for linux is a
   graphical user interface for tagging files of many different formats.
 
-## Analysis of Different Versions of an Album
+### Analysis of Different Versions of an Album
 
 While deciding on what version of an album is the best visit
 [Dynamic Range DB](https://dr.loudness-war.info).
 It shows dynamic range scorings of each version.
 
-## Get Additional Data to an Album/Single
+### Get Additional Data to an Album/Single
 
 If additional information for an album is needed, visit
 [Discogs](https://www.discogs.com).
 Discogs has tracklists, dates and more information to nearly all versions of
 albums and singles.
 
-## Naming Convention
+### Naming Convention
 
 It is suggested to place the audio files in a directory named after the album they
 belong to.
@@ -129,13 +183,22 @@ Files can be named in the following scheme:
 - music: `[<discnumber>.]<tracknumber>._<artist>_-_<title>`
 - audiobooks: `[<discnumber>.]<tracknumber>._<artist>_-_<album>_<tracknumber>`
 
-## Cue Files
+### Scoring Music
 
-`.cue` files act as a table of contents for a CD rip.
-These can be created when the
-[audio of a CD is extracted](#extract-audio-files-from-cds).
-Usually this appears together with a single file for the whole CD.
-The audio file can then be split according to the `.cue` file.
-For splitting of `.flac` files on a Linux system check the
-[a flac (package) entry](/wiki/linux/flac_(package).md#splitting-flac-file-according-to-cue-file)
-for further informations.
+Scoring music has moved more and more into the computer realm.
+An easy and intuitive software that can be used for this is
+[MuseScore.org](https://musescore.org/).
+MuseScore is free and open-source and is cross-platform.
+On [Linux based systems](/wiki/linux.md) it is available on most distributions via the `musescore`
+package or their [website](https://musescore.org/download) and can be run with the command `mscore`.
+For Windows visit the [download section of the MuseScore website](https://musescore.org/download).
+
+### Getting Metadata
+
+Using [MediaInfo](https://github.com/MediaArea/MediaInfo) metadata of a file can be obtained.
+A command for this looks like the following.
+In this the file to obtain metadata to is assumed to be `audio.flac`.
+
+```sh
+mediainfo audio.flac
+```

wiki/betterdiscord.md

@@ -0,0 +1,86 @@
+# BetterDiscord
+
+[BetterDiscord](https://betterdiscord.app) is an unofficial extension to
+[Discord](/wiki/discord.md) which allows to add various functionality through plugins and new
+themes.
+
+## Setup
+
+BetterDiscord can be downloaded from [the official website](https://betterdiscord.app).
+
+For [Linux-based systems](/wiki/linux.md) the tool
+[betterdiscordctl](https://github.com/bb010g/betterdiscordctl) can be used.
+After installing it the following commands have to be run for the stable version of Discord to be
+converted to BetterDiscord.
+
+```sh
+betterdiscordctl install
+```
+
+Afterwards BetterDiscord can be kept up to date with the following command.
+
+```sh
+betterdiscordctl self-upgrade
+```
+
+### Pacman Hook
+
+When using [Arch Linux](/wiki/linux/arch-linux.md) and its package managers
+[Pacman and Yay](/wiki/linux/package_manager.md#arch-linux-pacman-and-yay) a hook can be set that
+automatically updates the discord installation to setup betterdiscord using betterdiscordctl.
+The following is a [pacman hook](/wiki/linux/package_manager.md#hooks) that can be used to update
+betterdiscord automatically.
+Make sure to change the three occurences of `<username>` to the name of the user to install
+betterdiscord for.
+
+```sh
+[Trigger]
+Type = Package
+Operation = Install
+Operation = Upgrade
+Target = discord*
+
+[Action]
+Description = Rebuild BetterDiscord after Discord update
+When = PostTransaction
+Exec = /usr/bin/sh -c 'sudo -u <username> betterdiscordctl reinstall >/dev/null 2>&1; sudo -u <username> xvfb-run -a discord --help >/dev/null 2>&1; sudo -u <username> betterdiscordctl install >/dev/null 2>&1; true'
+Depends = xorg-server-xvfb
+Depends = betterdiscordctl
+NeedsTargets
+```
+
+## Usage
+
+This section addresses the usage of BetterDiscord.
+
+### Recommended Themes
+
+The following themes are recommended by the author of this wiki.
+
+- `midnight` is a dark, customizable discord theme.
+- `system24` is a tui-like discord theme.
+
+### Recommended Plugins
+
+The following plugins are recommended by the author of this wiki.
+
+- `BetterChatNames` improves chat names by removing dashes in chat channels.
+- `BetterFriendList` adds extra controls to the friend page.
+- `BetterVolume` allows to set user volume manually and higher than 200%.
+- `ChatCounter` adds a character counter to most inputs.
+- `DoNotTrack` stops Discord from tracking many things.
+- `GameActivityToggle` adds a quick-toggle game activity button.
+- `HideDisabledEmojis` hides disabled emojis form the emoji picker.
+- `ImageUtilities` adds several utilities for images/videos.
+- `InterTimestamps` allows you to insert timestamp markdown.
+- `InvisibleTyping` is an enhanced version of silent typing.
+- `MoreRoleColors` adds role colors to usernames.
+- `OnlineFriendCount` adds the old online friend count.
+- `PermissionViewer` allows to view a users permissions.
+- `PinDMs` allows to pin DMs.
+- `QuickMention` adds a mention button to the message 3-dot menu.
+- `ServerDetails` shows server details in the server list tooltip.
+- `SplitLargeMessages` allows you to enter larger messages, which will automatically split into
+  several smaller messages.
+- `StaffTag` adds a crown to server owners (or admins/management).
+- `Uncompressed Images` will improve image quality of previews.

wiki/bibliographic_software.md

@@ -0,0 +1,9 @@
+# Bibliographic Software
+
+A bibliographic software is software that manages a database of citation or bibliographic records.
+It produces citations for the stored records that are used in scholarly research.
+
+## Software Solutions
+
+- [Papis](/wiki/linux/papis.md) is a [command-line based](/wiki/linux/shell.md) for
+  [Linux](/wiki/linux.md) bibliography manager that can be used for LaTeX using the BibTeX format.

wiki/bind.md

@@ -95,7 +95,7 @@ $TTL 1D
 
 
 To make the server you operate on the nameserver select a subdomain for it and
-subsitute `<servername>` for it and its IP address `<ip of server>`.
+subsitute `<servername>` for it and its [IP address](/wiki/ip_address.md) `<ip of server>`.
 The following uses a filled in example with multiple subdomains.
 It uses CNAME records as a placeholder for the ip.
 In the last section the domain itself `home.server` is mapped to the ip

wiki/bittorrent.md

@@ -28,5 +28,5 @@ This is not a legal advice.
 Take your local laws into account when downloading torrents.
 Some torrents can be copyright infringing and therefor illegal to download.
 Only download legal and safe torrents like the
-[Arch Linux ISO](/wiki/linux/arch-linux.md#iso-medium).
+[Arch Linux ISO](/wiki/linux/arch-linux.md#create-installation-medium).
 Seeding it can help the community.

wiki/calibre.md

@@ -1,11 +1,13 @@
-# Calibre
+# calibre
 
-[Calibre](https://calibre-ebook.com/) is a cross-platform, free and open-source
-software suite for [e-book](/wiki/e-books.md) management.
+[calibre](https://calibre-ebook.com/) is a cross-platform, free and open-source
+software suite for [e-book](/wiki/e-book.md) management.
 It supports various formats aswell as conversion between them.
 
 ## Usage
 
+This section addresses various features of calibre.
+
 ## Adding a Plugin
 
 A plugin by a third party can be added by selecting a `.zip` archive - usually
@@ -31,6 +33,10 @@ thomas_schickinger;_angelika_steger/diskrete_strukturen_2/thomas_schickinger_&_a
 This assumes the sort author names and sort titles are set as described in
 [the following section](#changing-the-default-author-and-title-sort).
 
+In the same view only the boxes `Save cover separately`, `Save metadata in a separate OPF file` and
+`Save data file as well` should be unchecked.
+All others are used to ensure a lowercase directory and file name without special characters.
+
 ## Changing the Default Author and Title Sort
 
 Under `Preferences` and `Tweaks` the corresponding settings to change the title
@@ -55,3 +61,59 @@ This entry is based on two posts on mobileread - one regarding the
 [sort author name](https://www.mobileread.com/forums/showthread.php?t=314663)
 and the other regarding the
 [sort title](https://www.mobileread.com/forums/showthread.php?t=249870).
+
+## Changing the Cover of a Book
+
+Changing covers of a book can be done by editing the metadata available via the right-click menu.
+However this is not enough in some cases.
+`.pdf` in contrast to `.epub` files won't save the cover just by this action.
+After changing the cover in the metadata screen `.pdf` files have to be converted to correctly
+display the cover since the first page of such a file is generally considered the cover.
+An alternative to this is the `PDF Cover` Plugin which allows the insertion of the cover before all
+other pages without an extra conversion.
+Please note that it prepends the cover and does not delete any pages.
+
+## Transfer Books to a Device
+
+To transfer books to a device connect a e-reader to the computer.
+After a while calibre should recognize the device which will be apparent by the appearance of
+additional buttons on the top menu like the `Send to device`- and the `Device`-Button.
+First make sure only the formats you want will be transfered.
+This can be done by selecting `Device`, `File formats` and checking the formats as needed.
+Afterwards select the books and press `Send to device` to start the process of transfering the
+devices.
+Alternatively only specific formats of the books can be send to the device by selecting
+`Send specific format to` and `Main memory` under the `Send to device` menu.
+If there are books that contain series metadata make sure to disconnect the e-reader once and
+reconnect it.
+Afterwards select `Update cached metadata on device` under `Device` to update the metadata
+including the series.
+Finally disconnect the device.
+
+## KEPUB Format
+
+The `.kepub` format is a format that is similar to a normal epub but has some performance
+improvements for Kobo devices.
+It is recommended to convert `.mobi` and `.epub` files to a `.kepub` file before
+[transfering it to a Kobo device](#transfer-books-to-a-device).
+For this the Plugin `KePub Output` by Joel Goguen [can be added](#adding-a-plugin) can be
+installed.
+Afterwards books can be converted the normal way, but now the output format `.kepub` is available.
+Additionally the `Kobo Touch Extended` plugin is recommended to use since it makes sending books to
+Kobo e-readers easier.
+Finally `KePub Metadata Reader` and `KePub Metadata Reader` make it possible to read and write
+metadata to `.kepub` files which is especially useful.
+
+## Exporting and Importing Settings and Libraries
+
+This section explains how to export and import the settings of one calibre instance to another.
+It is based on a
+[reddit comment by dwhitzzz](https://www.reddit.com/r/Calibre/comments/1313kix/comment/mo4b9rn).
+
+To export the settings and libraries of a calibre instance open the corresponding instance and then
+right-click the `calibre` Button on the top menu.
+Select `Export/import all calibre data`, select the export or import option and then follow the
+instructions.
+Please note that the export only works when an empty folder is selected.
+All calibre data will then be exported into the selected directory.
+For the import process the folder that includes the calibre data has to be selected.

wiki/chameleon.md

@@ -0,0 +1,14 @@
+# Chameleon
+
+[Chameleon](https://addons.mozilla.org/en-GB/firefox/addon/chameleon-ext/) is a
+[Firefox](/wiki/firefox.md) [add-on](/wiki/firefox.md#list-of-useful-firefox-add-ons) that spoofs
+your browser profile including user agent and screen size.
+It also can be used to change the [IP address](/wiki/ip_address.md)
+
+## Spoofing the IP Address
+
+This add-on can also be used to avoid [geo-blocking](/wiki/ip_address.md#geo-blocking) by selecting
+IP ranges in the `Headers` tab.
+The following are example ranges that work well for specific countries.
+
+- Brazil: `124.81.64.0` to `124.81.127.255`

wiki/communication.md

@@ -4,12 +4,14 @@ Computer communication can have multiple different forms.
 There are voice and video calls aswell as text based messaging.
 This article bundles all of them.
 
-## VoIP
+## Social Platforms, Messengers and VoIP Services
 
-This section lists some of the most common Voice over IP (VoIP) platforms.
+This section lists some of the most common Voice over IP (VoIP) services, messengers and other
+social platforms.
 
+- [Discord](/wiki/discord.md) is a widely used, proprietary social platform.
 - [Matrix](/wiki/matrix.md) is a decentralized and open-source social platform.
-- [Discord](https://discord.com/) is a widely used, proprietary social platform.
+- [Signal](/wiki/signal.md) is an open-source, encrypted messaging service.
 
 ### Soundboards
 

wiki/cups.md

@@ -21,3 +21,72 @@ For Linux computers follow these instructions:
 - Restart the CUPS service: `systemctl restart cups`
 - Test connectivity: `lpstat -r`
 - Check the detected printers with: `lpstat -v`
+
+## Usage
+
+This section addresses the usage of the CUPS.
+
+### Adding a Printer
+
+A printer can be added using the webinterface.
+The webinterface is normally reachable on port 631.
+This process is guided and should be self-explanatory.
+However in some cases additional drivers have to be installed.
+For example Brother label printers of the ptouch series feature drivers that are available for most
+[Linux](/wiki/linux.md) distributions in a package named `printer-driver-ptouch`.
+When adding the printer a network address has to be given.
+For USB printers this can be done via the USB protocol.
+Continuing the example Brother label Printer QL-600 the connection `usb://Brother/QL-600` is
+sufficient.
+When using multiple printers the serial number can be given in addition to this.
+This is done by appending it the the mentioned connection string and will look like
+`usb://Brother/QL-600?serial=000J1Z140282`.
+The examples using the Brother printer are taken from a
+[dwaves article](https://dwaves.de/2022/07/13/gnu-linux-debian-11-how-to-setup-brother-ql-600-labelprinter/).
+
+### Custom Formats For Brother Printers 
+
+This section is based on an entry in the
+[german FAQ on the brother website](https://support.brother.com/g/b/faqend.aspx?c=de&lang=de&prod=lpql1110nwbeuk&faqid=faqp00100409_000).
+
+Especially when using continuos-length Brother label printers it can be useful to set up custom
+formats.
+After setting up the CUPS install the package that provides
+`brpapertoollpr_<printer name in cups>` which differs from printer to printer.
+For example when using a Brother QL-600 this command is named `brpapertoollpr_ql600` and on some
+[Linux](/wiki/linux.md) distributions like [Arch Linux](/wiki/linux/arch-linux.md) is provided in a
+package called `brother-ql600`.
+
+To then set up a new custom format run the following command.
+
+```sh 
+brpapertoollpr_<printer name in command> -P <printer name in cups> -n <format name> -w <width> -h <height>
+```
+
+`<printer name in command>` is the part of the command that corresponds to the printer as described
+in the previous sentence.
+`<printer name in cups>` and `<format name>` are the name of the printer already set up and given in
+CUPS and the name chosen for the new format.
+And `<width>` and `<height>` are width and height of the new format both given in millimeters.
+A complete command could look something like the following. 
+
+
+```sh 
+brpapertoollpr_ql600 -P Brother_QL-600 -n "62mmx12mm" -w 62 -h 12
+```
+
+The command to delete a custom format is the following.
+It uses the same variables and names as the command above.
+
+```sh 
+brpapertoollpr_ql600 -P <printer name> -d <format name>
+```
+
+The usage of this command could look similar to the following example.
+
+```sh 
+brpapertoollpr_ql600 -P Brother_QL-600 -d "62mmx12mm"
+```
+
+After setting up the new format it can be selected in the CUPS interface and used with the Brother
+printer it was set up for.

wiki/database.md

@@ -1,6 +1,6 @@
-# Databases
+# Database
 
-Databases are data collections of a computer system.
+A database is a data collections of a computer system.
 Most prominent type of database are SQL databases.
 
 ## Database management systems (DBMS)

wiki/discord.md

@@ -0,0 +1,28 @@
+# Discord
+
+[Discord](https://discord.com/) is an social platform that combines voice and video conferences as
+well as instant messaging chats.
+
+## Usage
+
+This section addresses various features of Discord.
+
+### Disable Automatic Update Checks
+
+By default Discord performs an automatic check to see if it is up to date.
+On [Linux](/wiki/linux.md)-based systems it can be disabled by adding `"SKIP_HOST_UPDATE": true` to
+the `~/.config/discord/settings.json` file.
+
+### Setting Up a Music Bot
+
+For Discord there are various bots capable of playing music.
+The following is a list of bots featured in this wiki that can do this.
+
+- [Sinusbot](/wiki/sinusbot.md) is a self-hosted bot for Discord that can play music and sounds. 
+  It's closed-source and free of charge.
+  It also features [Teamspeak](/wiki/teamspeak.md) support.
+
+### Themes and Plugins
+
+By default Discord has no option to use themes or plugins.
+This however can be changed by using [BetterDiscord](/wiki/betterdiscord.md).

wiki/docker.md

@@ -5,7 +5,7 @@ Due to easy handling and reproducable environments it is a useful tool.
 
 ## Setup
 
-- Arch linux: run `pacman -S docker` to install docker
+- [Arch Linux](/wiki/linux/arch-linux.md): run `pacman -S docker` to install docker
 - Ubuntu: visit [the official installation guide](https://docs.docker.com/engine/install/ubuntu/)
 
 Another possibility is to try the official convenience script.
@@ -19,6 +19,14 @@ sudo sh get-docker.sh
 
 ## Usage
 
+This section addresses various features of Docker.
+
+### virtualize Operating Systems
+
+Docker is a tool that can be used to virtualize different programs and softwares.
+Especially for containerizing and virtualizing operating systems (mostly based on
+[Linux](/wiki/linux.md)) can be handled by [distrobox](https://github.com/89luca89/distrobox).
+
 ### Run Docker as non-root user
 
 To run docker as a non-root user you need to add your user to the `docker` group.
@@ -32,7 +40,7 @@ After that relog into your machine and you should be able to run
 The programs below are useful docker-management systems in different style.
 
 - [ctop](https://github.com/bcicen/ctop): top-like cli interface for containers
-- [portainer](./docker/portainer.md): web ui for managing docker and kubernetes
+- [portainer](https://www.portainer.io/): web ui for managing docker and kubernetes
 
 ### Enable Nvidia GPUs
 
@@ -57,7 +65,7 @@ publish ports to reverse proxy them.
 ### Dockerize a graphical application
 
 A graphical application can easily be dockerized and made available over both
-the [web browser](/wiki/browser.md) or [VNC](/wiki/vnc.md).
+the [web browser](/wiki/web_browser.md) or [VNC](/wiki/vnc.md).
 For this
 [jlesages baseimage-gui container](https://hub.docker.com/r/jlesage/baseimage-gui)
 can be used.

wiki/docker/actualbudget_-actual-server.md

@@ -0,0 +1,67 @@
+# actualbudget - actual-server
+
+This is a [Docker](/wiki/docker.md) container for an actualbudget server.
+The official container and documentation was made by
+[actualbudget](https://actualbudget.org/docs/install/docker/).
+This docker-rebuild is made up by a `docker-compose.yml` file.
+
+## Set-up
+
+Create the files `rebuild.sh`, `docker-compose.yml` at the same
+place.
+Change the settings according to your needs and run `./rebuild.sh` afterwards.
+
+### Ports
+
+Set the following ports in the `ports:` section.
+
+| Container Port | Recommended outside port | Protocol  | Description   |
+| -------------- | ------------------------ | --------- | ------------- |
+| `5006`         | `5006`                   | TCP       | WebUI         |
+
+### Volumes
+
+Set the following volumes with the -v tag.
+
+| Outside mount/volume name | Container mount | Description        |
+| ------------------------- | --------------- | ------------------ |
+| `actual`                  | `/data`         | Actual Budget data |
+
+### rebuild.sh
+
+```sh
+#!/bin/sh
+docker-compose down
+docker-compose up -d
+```
+
+### docker-compose.yml
+
+```yml
+version: '3'
+services:
+  actual_server:
+    image: docker.io/actualbudget/actual-server:latest
+    ports:
+      # This line makes Actual available at port 5006 of the device you run the server on,
+      # i.e. http://localhost:5006. You can change the first number to change the port, if you want.
+      - '5006:5006'
+    # environment:
+      # Uncomment any of the lines below to set configuration options.
+      # - ACTUAL_HTTPS_KEY=/data/selfhost.key
+      # - ACTUAL_HTTPS_CERT=/data/selfhost.crt
+      # - ACTUAL_PORT=5006
+      # - ACTUAL_UPLOAD_FILE_SYNC_SIZE_LIMIT_MB=20
+      # - ACTUAL_UPLOAD_SYNC_ENCRYPTED_FILE_SYNC_SIZE_LIMIT_MB=50
+      # - ACTUAL_UPLOAD_FILE_SIZE_LIMIT_MB=20
+      # See all options and more details at https://actualbudget.github.io/docs/Installing/Configuration
+      # !! If you are not using any of these options, remove the 'environment:' tag entirely.
+    volumes:
+      # Change './actual-data' below to the path to the folder you want Actual to store its data in on your server.
+      # '/data' is the path Actual will look for its files in by default, so leave that as-is.
+      - actual:/data
+    restart: unless-stopped
+
+volumes:
+   actual:
+```

wiki/docker/alexjustesen_-_speedtest-tracker.md

@@ -0,0 +1,67 @@
+# alexjustesen - speedtest-tracker
+
+This is a [Docker](/wiki/docker.md) container for a selfhosted internet speed
+tracker.
+The official container and documentation was made by
+[alexjustesen](https://github.com/alexjustesen/speedtest-tracker).
+
+## Set-up
+
+Create the file `rebuild.sh`.
+Change the settings according to your needs and run `./rebuild.sh` afterwards.
+It is important to set a correct app key as described in
+[the following section](#environment-variables).
+
+### Environment-variables
+
+Set the following variables with the -e tag.
+
+| Name                 | Usage                                                                                              | Default         |
+| -------------------- | -------------------------------------------------------------------------------------------------- | --------------- |
+| `APP_KEY`            | This is used for encryption and can be generated by `echo -n 'base64:'; openssl rand -base64 32;`  |                 |
+| `DB_CONNECTION`      | Database connection type                                                                           |                 |
+| `PGID`               | Group ID                                                                                           |                 |
+| `PUID`               | User ID                                                                                            |                 |
+| `APP_TIMEZONE`       | Timezone of the app                                                                                | `Europe/London` |
+| `DISPLAY_TIMEZONE`   | Timezone of the display                                                                            | `Europe/London` |
+| `SPEEDTEST_SCHEDULE` | Cron-formatted schedule for speedtest (`6 */6 * * *`: 6 minutes after every 6th hour)              |                 |
+
+### Volumes
+
+Set the following volumes with the -v tag.
+
+| Outside mount/volume name | Container mount | Description          |
+| ------------------------- | --------------- | -------------------- |
+| `speedtest_config`        | `/config`       | storage for config   |
+| `speedtest_keys`          | `/config/keys`  | storage for ssl keys |
+
+### Ports
+
+Set the following ports with the -p tag.
+
+| Container Port | Recommended outside port | Protocol | Description               |
+| -------------- | ------------------------ | -------- | ------------------------- |
+| `80`           | `8765`                   | TCP      | WebUI                     |
+| `443`          | ``                       | TCP      | SSL-encrypted WebUI       |
+
+### rebuild.sh
+
+```sh
+#!/bin/sh
+docker stop speedtest
+docker rm speedtest
+docker pull lscr.io/linuxserver/speedtest-tracker:latest
+docker run --name speedtest \
+    --restart unless-stopped \
+    -p 8765:80 \
+    -e PUID=1000 \
+    -e PGID=1000 \
+    -e APP_KEY="<generate>" \
+    -e DB_CONNECTION=sqlite \
+    -e SPEEDTEST_SCHEDULE="6 */6 * * *" \
+    -e APP_TIMEZONE="Europe/Berlin" \
+    -e DISPLAY_TIMEZONE="Europe/Berlin" \
+    -v speedtest_config:/config \
+    -v speedtest_keys:/config/keys \
+    -d lscr.io/linuxserver/speedtest-tracker:latest
+```

wiki/docker/alexta69_-_metube.md

@@ -11,7 +11,7 @@ This docker-rebuild is made up by a `docker-compose.yml` file.
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -19,7 +19,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | ------------------------- | --------------- | ------------------------------------ |
 | `downloads`               | `/downloads`    | folder to download data to           |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -27,7 +27,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ----------- |
 | `8881`         | `8081`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -36,7 +36,7 @@ docker pull vim alexta69/metube
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "3"

wiki/docker/awesometechnologies_-_synapse-admin.md

@@ -1,6 +1,7 @@
 # awesometechnologies - synapse-admin
 
-This is a [Docker](/wiki/docker.md) container for a Synapse server of [Matrix](../matrix.md).
+This is a [Docker](/wiki/docker.md) container for a Synapse administration server of
+[Matrix](../matrix.md).
 The official container and documentation was made by
 [awesometechnologies](https://hub.docker.com/awesometechnologies/synapse-admin).
 This docker-rebuild is made up by a `docker-compose.yml` file.
@@ -10,7 +11,7 @@ This docker-rebuild is made up by a `docker-compose.yml` file.
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -18,7 +19,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ----------- |
 | `80`           | `80`                     | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -27,7 +28,7 @@ docker pull awesometechnologies/synapse-admin:latest
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "2"

wiki/docker/axhilrex_-_podgrab.md

@@ -10,7 +10,7 @@ The official container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following variables with the -e tag.
 
@@ -18,7 +18,7 @@ Set the following variables with the -e tag.
 | ---------- | ----------------------------- | ------- |
 | `PASSWORD` | Password for `podgrab` user   |         |
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -27,7 +27,7 @@ Set the following volumes with the -v tag.
 | `podgrab_config`          | `/config`       | Configuration files     |
 | `media_podcasts`          | `/assets`       | location for podcasts   |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -35,7 +35,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `8080`         | `8080`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/b4bz_-_homer.md

@@ -11,7 +11,7 @@ Place the file `config.yml` in the `homer` docker volume and change it to your
 needs.
 After that rerun `./rebuild.sh` to make update your config.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -19,7 +19,7 @@ Set the following volumes with the -v tag.
 | ------------------------- | --------------- | ---------------------- |
 | `homer`                   | `/www/assets`   | storage for icons, etc |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -27,7 +27,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `8080`         | `8080`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -41,7 +41,7 @@ docker run --name homer \
     -d b4bz/homer:latest
 ```
 
-## config.yml
+### config.yml
 
 ```yml
 title: "tmp"

wiki/docker/bbilly1_-_tubearchivist.md

@@ -10,7 +10,7 @@ TubeArchivist specific version of Elasticsearch and one a [redis](/wiki/docker/r
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
@@ -36,7 +36,7 @@ The following table lists the environment variables for the image `bbilly1/tubea
 | `ELASTIC_PASSWORD` | Password for Elasticsearch                  | ``      |
 | `ES_JAVA_OPTS`     | Additional Java options                     | ``      |
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -53,7 +53,7 @@ The following table lists the environment variables for the image `bbilly1/tubea
 | ------------------------- | ------------------------------- | --------------------------- |
 | `es`                      | `/usr/share/elasticsearch/data` | storage for elasticsearch   |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -61,7 +61,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ----------- |
 | `8000`         | `8881`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -69,7 +69,7 @@ docker-compose down
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: '3.3'

wiki/docker/benbusby_-_whoogle-search.md

@@ -14,7 +14,7 @@ just created folder.
 You can find the `docker-compose.yml` in the cloned directory.
 Set the variables, volumes and ports according and run the `rebuild.sh`.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -22,7 +22,7 @@ Set the following volumes with the -v tag.
 | ------------------------- | ---------------- | ---------------- |
 | `searx_config`            | `/config`        | configurations   |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -30,7 +30,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `5000`         | `8000`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -40,7 +40,7 @@ docker-compose up -d
 cd ..
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "2.2"

wiki/docker/bilde2910_-_hauk.md

@@ -23,7 +23,7 @@ htpasswd -BC 10 /etc/hauk/users.htpasswd <other user name>
 
 Finally run `./rebuild.sh`.
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -31,7 +31,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | ------------------------- | ------------------ | ------------------------------ |
 | `./config/hauk`           | `/etc/hauk`        | config and password location   |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -39,7 +39,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ---------------------- |
 | `80`           | `80`                     | TCP      | Basic service          |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -48,7 +48,7 @@ docker pull bilde2910/hauk
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "2"

wiki/docker/chocobozzz_-_peertube.md

@@ -14,7 +14,7 @@ Create the files `rebuild.sh`, `.env` and `docker-compose.yml` at the same
 place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -22,7 +22,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ----------- |
 | `9000`         | `9000`                   | TCP      | WebUI       |
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -32,7 +32,7 @@ Set the following volumes with the -v tag.
 | `config`                  | `/config`                  | configuration data     |
 | `data`                    | `/data`                    | further data storage   |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -40,7 +40,7 @@ docker-compose down
 docker-compose up -d
 ```
 
-## .env
+### .env
 
 ```sh
 TZ="Europe/Berlin"
@@ -75,7 +75,7 @@ PEERTUBE_SMTP_TLS=false
 PEERTUBE_SMTP_DISABLE_STARTTLS=false
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "3.3"

wiki/docker/cloudrac3r_-_bibliogram.md

@@ -14,7 +14,7 @@ a folder within the just created folder.
 You can find the `docker-compose.yml` in the cloned directory.
 Set the variables, volumes and ports according and run the `rebuild.sh`.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -22,7 +22,7 @@ Set the following volumes with the -v tag.
 | ------------------------- | --------------- | ----------------------------------- |
 | `db`                      | `/app/db`       | storage for the bibliogram database |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -30,7 +30,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ----------- |
 | `10407`        | `10407`                  | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -40,7 +40,7 @@ docker-compose up -d
 cd ..
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "3"

wiki/docker/coturn_-_coturn.md

@@ -0,0 +1,72 @@
+# coturn - coturn
+
+This is a [Docker](/wiki/docker.md) container for a TURN/STUN server.
+A server like this can be used in a [Matrix](../matrix.md) server configuration.
+The official container and documentation was made by
+[coturn](https://github.com/coturn/coturn).
+This docker-rebuild is made up by a `docker-compose.yml` file.
+
+## Set-up
+
+Create the files `rebuild.sh`, `data/matrix/coturn/turnserver.conf` and `docker-compose.yml` at the
+same place.
+Change the settings according to your needs and run `./rebuild.sh` afterwards.
+For the `data/matrix/coturn/turnserver.conf` file change the values for `static-auth-secret`,
+`realm`, `cli-password` and `external-ip`.
+For the passwords [OpenSSL](/wiki/linux/openssl.md#password-generator) can be used to create a
+sufficiently random password.
+The value of `external-ip` consists of the local IP (left side) and the public IP (right side).
+To get the local IP the command `ip route get 1` can be used.
+For the public IP the command `curl api.ipify.org` can be used.
+
+
+### Ports
+
+Set the following ports in the `ports:` section.
+
+| Container Port | Recommended outside port | Protocol | Description |
+| -------------- | ------------------------ | -------- | ----------- |
+| `3478`         | `3478`                   | TCP/UDP  | TURN/STUN   |
+| `5349`         | `5349`                   | TCP/UDP  | TURN/STUN   |
+| `49152-65535`  | `49152-65535`            | UDP      | TURN/STUN   |
+
+### rebuild.sh
+
+```sh
+#!/bin/sh
+docker-compose down
+docker pull coturn/coturn:latest
+docker-compose up -d
+```
+
+### docker-compose.yml
+
+```yml
+version: "2"
+services:
+  coturn:
+    image: "instrumentisto/coturn:latest"
+    restart: "unless-stopped"
+    volumes:
+      - "./data/matrix/coturn/turnserver.conf:/etc/coturn/turnserver.conf"
+    ports:
+      - "49160-49200:49160-49200/udp"
+      - "3478:3478"
+      - "5349:5349"
+```
+
+### data/matrix/coturn/turnserver.conf
+
+```txt
+use-auth-secret
+static-auth-secret=SomeSecretPasswordForMatrix
+realm=matrix.example.com
+listening-port=3478
+tls-listening-port=5349
+min-port=49160
+max-port=49200
+verbose
+allow-loopback-peers
+cli-password=SomePasswordForCLI
+external-ip=192.168.0.2/123.123.123.123
+```

wiki/docker/dperson_-_torproxy.md

@@ -8,7 +8,7 @@ The container and documentation was made by [dperson](https://hub.docker.com/r/d
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -17,7 +17,7 @@ Set the following volumes with the -v tag.
 | `tor_var`                 | `/var/lib/tor`  | Location for various files |
 | `tor_etc`                 | `/etc/tor`      | Various other config       |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -26,7 +26,7 @@ Set the following ports with the -p tag.
 | `8118`         | `8118`                   | HTTP     | privoxy web proxy    |
 | `9050`         | `9050`                   | SOCKS    | socks protocol proxy |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/dyonr_-_jackettvpn.md

@@ -15,7 +15,7 @@ Place the openvpn certificate in the `jacket_config` docker volume inside the
 `openvpn` folder.
 After that rerun `./rebuild.sh` to make update your config.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -24,7 +24,7 @@ Set the following volumes with the -v tag.
 | `jackett_config`          | `/config`       | storage for configs    |
 | `jackett_blackhole`       | `/blackhole`    | storage for magnets    |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -32,7 +32,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `9117`         | `9117`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 docker stop jackett

wiki/docker/dyonr_-_qbittorrentvpn.md

@@ -14,7 +14,7 @@ The default username of the web interface is `admin`.
 The default password is `adminadmin`.
 Both can be changed in the web interface after setup.
 
-## Environment-variables
+### Environment-variables
 
 Set the following variables with the -e tag.
 
@@ -25,7 +25,7 @@ Set the following variables with the -e tag.
 | `VPN_PASSWORD`      | Password for OpenVPN        | ` `     |
 | `LAN_NETWORK`       | Subnet of the local network | ` `     |
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -34,7 +34,7 @@ Set the following volumes with the -v tag.
 | `qbittorrentvpn_config`   | `/config`           | Configuration files     |
 | `qbittorrentvpn_data`     | `/downloads`        | Storage for data        |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -42,7 +42,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `9091`         | `8080`                   | TCP      | WebUI       |
 
-## Additional
+### Additional
 
 There are some special variables to set.
 
@@ -52,7 +52,7 @@ There are some special variables to set.
 | `--device`  | connect devices        |
 | `--sysctl`  | configure systemctl    |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/gitea_-_gitea.md

@@ -11,7 +11,7 @@ to it.
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
@@ -26,7 +26,7 @@ docker-compose file.
 | `DB_USER`   | Username for the database      |         |
 | `DB_PASSWD` | Password for the database      |         |
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -36,7 +36,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | `/etc/timezone`           | `/etc/timezone:ro` | link timezone                  |
 | `/etc/localtime`          | `/etc/localtime`   | link localtime                 |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -45,7 +45,7 @@ Set the following ports in the `ports:` section.
 | `3000`         | `3000`                   | TCP      | WebUI                  |
 | `22`           | `222`                    | TCP      | ssh port of git server |
 
-## Networks
+### Networks
 
 Set the following networks in the `networks:` section of the docker-compose file.
 
@@ -53,7 +53,7 @@ Set the following networks in the `networks:` section of the docker-compose file
 | ------- | --------------------- |
 | `gitea` | connect db with gitea |
 
-## Dependencies
+### Dependencies
 
 Set the following dependencies in the `depends_on:` section of the
 docker-compose file.
@@ -62,7 +62,7 @@ docker-compose file.
 | ---- | -------------------- |
 | `db` | Ensure db is running |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -70,7 +70,7 @@ docker-compose down
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "2"

wiki/docker/gramps-project_-_grampsweb.md

@@ -10,7 +10,7 @@ subcontainers - and one a [redis instance](/wiki/docker/redis.md).
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
@@ -22,7 +22,7 @@ docker-compose file.
 | `GRAMPSWEB_CELERY_CONFIG__result_backend` | Redis backend URL                    | ``      |
 | `GRAMPSWEB_RATELIMIT_STORAGE_URI`         | Storage URI                          | ``      |
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -37,7 +37,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | `gramps_media`            | `/app/media`             | storage for media           |
 | `gramps_tmp`              | `/tmp`                   | storage for temporary files |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -45,7 +45,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ----------- |
 | `5000`         | `80`                     | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -55,7 +55,7 @@ docker pull redis:alpine
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "3"

wiki/docker/grimsi_-_gameyfin.md

@@ -1,6 +1,6 @@
 # grimsi - gameyfin
 
-This is a [Docker](/wiki/docker.md) container for a [Gameyfin](/wiki/games/gameyfin.md).
+This is a [Docker](/wiki/docker.md) container for a [Gameyfin](/wiki/game/gameyfin.md).
 
 ## Set-up
 
@@ -11,7 +11,7 @@ gameyfin_config`.
 Make sure to run the following command on the config volume `chown -R 1000:root gameyfin_config`.
 Afterwards run `./rebuild.sh`.
 
-## Environment-variables
+### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
@@ -23,7 +23,7 @@ docker-compose file.
 | `GAMEYFIN_IGDB_API_CLIENT_ID`     | id of twitch internet game database     |         |
 | `GAMEYFIN_IGDB_API_CLIENT_SECRET` | secret of twitch internet game database |         |
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -31,7 +31,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | ------------------------- | ----------------------- | ------------------------------ |
 | `media_games`             | `/opt/gameyfin-library` | storage for games and configs  |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -40,7 +40,7 @@ Set the following ports in the `ports:` section.
 | `8080`         | `8093`                   | TCP      | WebUI                  |
 
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -48,7 +48,7 @@ docker-compose down
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "3"

wiki/docker/haugene_-_transmission-openvpn.md

@@ -13,7 +13,7 @@ To see which providers are supported take a look at the
 [official documentation](https://haugene.github.io/docker-transmission-openvpn/supported-providers/).
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following variables with the -e tag.
 
@@ -26,7 +26,7 @@ Set the following variables with the -e tag.
 | `CREATE_TUN_DEVICE` | Use a tunnel device         | ` `     |
 | `WEBPROXY_ENABLES`  | Use a webproxy              | ` `     |
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -36,7 +36,7 @@ Set the following volumes with the -v tag.
 | `transmission data`       | `/data`         | Storage for data        |
 | `/etc/localtime`          | `/etc/localtime:ro` | Link to the systemtime  |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -44,7 +44,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `9091`         | `9091`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/henrywhitaker3_-_speedtest-tracker.md

@@ -10,7 +10,7 @@ The official container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following variables with the -e tag.
 
@@ -19,7 +19,7 @@ Set the following variables with the -e tag.
 | `OOKLA_EULA_GDPR` | set to `true` to accept EULA  |         |
 | `AUTH`            | set to `true` to enable login |         |
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -27,7 +27,7 @@ Set the following volumes with the -v tag.
 | ------------------------- | --------------- | ------------------ |
 | `speedtest`               | `/config`       | storage for config |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -35,7 +35,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `80`           | `8765`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/homeassistant_-_home-assistant.md

@@ -10,7 +10,7 @@ The official container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -18,7 +18,7 @@ Set the following volumes with the -v tag.
 | ------------------------- | --------------- | ------------------------------- |
 | `homeassistant_data`      | `/config`       | configuration for devices, etc  |
 
-## Environment-variables
+### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
@@ -27,12 +27,12 @@ docker-compose file.
 | --------------------- | --------------------------- | ----------------------- |
 | `TZ`                  | specify the timezone        | ``                      |
 
-## Additional
+### Additional
 
 The container needs acces to the host network.
 This will at the same time expose port 8123 as web interface.
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 docker run --name homeassistant \

wiki/docker/immich-app_-_immich-server.md

@@ -0,0 +1,75 @@
+# immich-app - immich-server
+
+This is a [Docker](/wiki/docker.md) container for a [immich](/wiki/immich.md) server.
+The official container and documentation was made by
+[immich](https://github.com/immich-app/immich).
+This docker-rebuild is made up by a `docker-compose.yml` file.
+In addition to the main container you need to connect a
+[redis](/wiki/docker/redis.md) and a [postgres](/wiki/docker/postgres.md) container to it.
+
+## Set-up
+
+Create the files `rebuild.sh`, `.env` and `docker-compose.yml` at the same
+place.
+Please note that the `docker-compose.yml` file should be retrieved from the
+[Github releases page](https://github.com/immich-app/immich/releases/)
+Change the settings according to your needs and run `./rebuild.sh` afterwards.
+
+### Environment-variables
+
+The environment variables are set via the `.env` file and listed in the
+[corresponding section](#env).
+
+### Ports
+
+Set the following ports in the `ports:` section.
+
+| Container Port | Recommended outside port | Protocol  | Description   |
+| -------------- | ------------------------ | --------- | ------------- |
+| `2283`         | `3001`                   | TCP       | WebUI         |
+
+### Volumes
+
+Set the following volumes with the -v tag.
+
+| Outside mount/volume name | Container mount       | Description   |
+| ------------------------- | --------------------- | ------------- |
+| `immich_library`          | `/usr/src/app/upload` | Library       |
+| `/etc/timezone`           | `/etc/timezone:ro`    | Timezone      |
+
+### rebuild.sh
+
+```sh #!/bin/sh
+docker-compose down
+docker-compose up -d
+```
+
+### .env
+
+```sh
+# You can find documentation for all the supported env variables at https://immich.app/docs/install/environment-variables
+
+# The location where your uploaded files are stored
+UPLOAD_LOCATION=immich_library
+# The location where your database files are stored
+DB_DATA_LOCATION=immich_postgres
+
+# To set a timezone, uncomment the next line and change Etc/UTC to a TZ identifier from this list: https://en.wikipedia.org/wiki/List_of_tz_database_time_zones#List
+# TZ=Etc/UTC
+
+# The Immich version to use. You can pin this to a specific version like "v1.71.0"
+IMMICH_VERSION=release
+
+# Connection secret for postgres. You should change it to a random password
+# Please use only the characters `A-Za-z0-9`, without special characters or spaces
+DB_PASSWORD=postgres
+
+# Disable Machine Learning
+IMMICH_MACHINE_LEARNING_ENABLED=false
+IMMICH_MACHINE_LEARNING_URL=false
+
+# The values below this line do not need to be changed
+###################################################################################
+DB_USERNAME=postgres
+DB_DATABASE_NAME=immich
+```

wiki/docker/itzg_-_minecraft-server.md

@@ -1,7 +1,7 @@
 # itzg - minecraft-server
 
 This is a [Docker](/wiki/docker.md) container for a
-[Minecraft](../games/minecraft.md) server.
+[Minecraft](/wiki/game/minecraft.md) server.
 The container and documentation was made by
 [itzg](https://hub.docker.com/r/itzg/minecraft-server).
 
@@ -10,7 +10,7 @@ The container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following variables with the -e tag.
 
@@ -24,7 +24,7 @@ Set the following variables with the -e tag.
 | `ICON`        | Link the Icon of the Server                                    |                                              |
 | `MOTD`        | Set the Message of the day                                     | "A Paper Minecraft Server powered by Docker" |
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -32,7 +32,7 @@ Set the following volumes with the -v tag.
 | ------------------------- | --------------- | ------------------------------ |
 | `minecraft`               | `/data`         | location for all relevant data |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -40,7 +40,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | --------- | ------------------ |
 | `25565`        | `25565`                  | Minecraft | Port for Minecraft |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -60,3 +60,25 @@ docker run --name minecraft \
     -e MOTD="Message of the day" \
     -d itzg/minecraft-server
 ```
+
+## Usage
+
+This section addresses the usage of the minecraft-server container.
+
+### Installing Mods
+
+Mods can be installed as described in the
+[corresponding article of the official documentation](https://github.com/itzg/docker-minecraft-server/blob/master/docs/mods-and-plugins/index.md).
+For this set the server type by using the `-e TYPE=<type>` flag.
+`<type>` is the API that is used as the core library.
+Most notably this value could be `FABRIC` or `FORGE`.
+After this the mods (as `.jar` files) can be placed in the `mods` directory of the
+[Docker](/wiki/docker.md) volume.
+Afterwards run the [`rebuild.sh`](#rebuildsh) to restart the server with loaded mods.
+
+#### Installing Datapacks
+
+The installation of datapacks is done similar to the described process in the
+[corresponding section of the minecraft entry](/wiki/game/minecraft.md#installing-datapacks).
+The only difference is the path to place the `.zip` datapack files in which is `world/datapacks` in
+case of this [Docker](/wiki/docker.md) image.

wiki/docker/iv-org_-_invidious.md

@@ -12,12 +12,12 @@ In addition to the main container you need to connect a
 
 First of all create a folder for your `rebuild.sh`.
 After that clone invidious from
-[github](https://github.com/iv-org/invidious) into a folder within the
+[GitHub](https://github.com/iv-org/invidious) into a folder within the
 just created folder.
 You can find the `docker-compose.yml` in the cloned directory.
 Set the variables, volumes and ports according and run the `rebuild.sh`.
 
-## Environment-variables
+### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
@@ -39,7 +39,7 @@ docker-compose file.
 | `popular_enabled`      | enable the popular section                                 | `true`  |
 | `registration_enabled` | enable registration for new users                          | `true`  |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -47,7 +47,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ----------- |
 | `3000`         | `3000`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -59,7 +59,7 @@ docker-compose up -d
 cd ..
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "3"

wiki/docker/jkarlos_-_git-server-docker.md

@@ -1,6 +1,6 @@
 # jkarlos - git-server-docker
 
-This is a [Docker](/wiki/docker.md) container for a [git](../git.md) server.
+This is a [Docker](/wiki/docker.md) container for a [git](/wiki/git_%28general%29.md) server.
 The official container and documentation was made by
 [jkarlos](https://hub.docker.com/r/jkarlos/git-server-docker).
 
@@ -9,7 +9,7 @@ The official container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -18,7 +18,7 @@ Set the following volumes with the -v tag.
 | `git-server_repos`        | `/git-server/repos` | storage for git repos     |
 | `git-server_keys`         | `/git-server/keys`  | storage for user ssh keys |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -26,7 +26,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ------------------------------------- |
 | `22`           | `2222`                   | TCP      | ssh port for accessing the git server |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/johnktims_-_folding-at-home.md

@@ -10,7 +10,7 @@ The official container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -18,7 +18,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `7396`         | `7396`                   | TCP      | WebUI       |
 
-## Additional
+### Additional
 
 There are some special variables to set.
 
@@ -28,11 +28,7 @@ There are some special variables to set.
 | `--power` | set the default power to fold at home |
 | `--team`  | set your teamid to contribute points  |
 
-### GPU
-
-GPU support is documented in [the docker article](../docker.md).
-
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -48,3 +44,9 @@ docker run --name folding-at-home \
     --power=full \
     --team=000000
 ```
+
+## Usage
+
+### GPU-Support
+
+GPU support is documented in [the docker article](../docker.md).

wiki/docker/jonohill_-_docker-openvpn-proxy.md

@@ -10,7 +10,7 @@ The official container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -18,7 +18,7 @@ Set the following volumes with the -v tag.
 | ------------------------- | --------------- | ------------------------ |
 | `ovpn-proxy`              | `/config`       | storage for openvpn data |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -26,7 +26,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ------------ |
 | `9050`         | `8080`                   | HTTP     | proxy port   |
 
-## Environment-Variables
+### Environment-Variables
 
 Set the following variables with the -e tag.
 
@@ -36,7 +36,7 @@ Set the following variables with the -e tag.
 | `OPENVPN_USERNAME`  | username for OpenVPN        | ` `     |
 | `OPENVPN_PASSWORD`  | password for OpenVPN        | ` `     |
 
-## Additional
+### Additional
 
 There are some special variables to set.
 
@@ -46,7 +46,7 @@ There are some special variables to set.
 | `--device`  | connect devices        |
 | `--sysctl`  | configure systemctl    |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/kylemanna_-_openvpn.md

@@ -22,21 +22,7 @@ docker run -v openvpn:/etc/openvpn --rm -it kylemanna/openvpn ovpn_initpki
 
 Afterwards run `./rebuild.sh`.
 
-## Usage
-
-### Create Certificates
-
-Each device that connects to the [OpenVPN](/wiki/openvpn.md) server should
-have a certificate to connect by.
-Create a certificate and retrieve it by running the following commands.
-Change all occurences of `<CLIENTNAME>` to the name of the client.
-
-```sh
-docker run -v openvpn:/etc/openvpn --rm -it kylemanna/openvpn easyrsa build-client-full <CLIENTNAME> nopass
-docker run -v openvpn:/etc/openvpn --rm kylemanna/openvpn ovpn_getclient <CLIENTNAME> > <CLIENTNAME>.ovpn
-```
-
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -44,7 +30,7 @@ Set the following volumes with the -v tag.
 | ------------------------- | --------------- | ------------------------ |
 | `ovpn`                    | `/etc/openvpn`  | storage for openvpn data |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -52,7 +38,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ------------ |
 | `1194`         | `1194`                   | UDP      | openvpn port |
 
-## Additional
+### Additional
 
 There are some special variables to set.
 
@@ -60,7 +46,7 @@ There are some special variables to set.
 | ----------- | ---------------------- |
 | `--cap-add` | add linux capabilities |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -74,3 +60,17 @@ docker run --name openvpn \
     -v ovpn:/etc/openvpn \
     -d kylemanna/openvpn
 ```
+
+## Usage
+
+### Create Certificates
+
+Each device that connects to the [OpenVPN](/wiki/openvpn.md) server should
+have a certificate to connect by.
+Create a certificate and retrieve it by running the following commands.
+Change all occurences of `<CLIENTNAME>` to the name of the client.
+
+```sh
+docker run -v openvpn:/etc/openvpn --rm -it kylemanna/openvpn easyrsa build-client-full <CLIENTNAME> nopass
+docker run -v openvpn:/etc/openvpn --rm kylemanna/openvpn ovpn_getclient <CLIENTNAME> > <CLIENTNAME>.ovpn
+```

wiki/docker/linuxserver_-_airsonic-advanced.md

@@ -10,7 +10,7 @@ The official container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following variables with the -e tag.
 
@@ -20,7 +20,7 @@ Set the following variables with the -e tag.
 | `PGID` | GroupID  |         |
 | `TZ`   | Timezone |         |
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -33,7 +33,7 @@ Set the following volumes with the -v tag.
 | `media_audiobooks`        | `/audiobooks`   | Location for audiobooks |
 | `media_podcasts`          | `/podcasts`     | location for podcasts   |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -41,7 +41,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `4040`         | `4040`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/linuxserver_-_airsonic.md

@@ -10,7 +10,7 @@ The official container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following variables with the -e tag.
 
@@ -20,7 +20,7 @@ Set the following variables with the -e tag.
 | `PGID` | GroupID  |         |
 | `TZ`   | Timezone |         |
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -33,7 +33,7 @@ Set the following volumes with the -v tag.
 | `media_audiobooks`        | `/audiobooks`   | Location for audiobooks |
 | `media_podcasts`          | `/podcasts`     | location for podcasts   |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -41,7 +41,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `4040`         | `4040`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/linuxserver_-_freshrss.md

@@ -11,7 +11,7 @@ This docker-rebuild is made up by a `docker-compose.yml` file.
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
@@ -22,7 +22,7 @@ docker-compose file.
 | `PGID` | Groupid to run the container |         |
 | `TZ`   | specify the timezone         |         |
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -30,7 +30,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | ------------------------- | --------------- | ------------------------------------ |
 | `config`                  | `/config`       | storage for config files of jellyfin |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -38,7 +38,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ----------- |
 | `7008`         | `80`                     | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -47,7 +47,7 @@ docker pull lscr.io/linuxserver/freshrss:latest
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "2.1"

wiki/docker/linuxserver_-_jellyfin.md

@@ -11,7 +11,7 @@ This docker-rebuild is made up by a `docker-compose.yml` file.
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
@@ -22,7 +22,7 @@ docker-compose file.
 | `PGID` | Groupid to run the container |         |
 | `TZ`   | specify the timezone         |         |
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -40,7 +40,7 @@ it is recommended to use them as external volumes (volumes section:
 To use the rebuild the volumes have to exist before creating the container
 (`docker volume create media_movies` and tvshows accordingly).
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -48,7 +48,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ----------- |
 | `8096`         | `8096`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -57,7 +57,7 @@ docker pull linuxserver/jellyfin:latest
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "2"

wiki/docker/linuxserver_-_lidarr.md

@@ -21,7 +21,7 @@ This namely causes the following line in the
       - /var/lib/docker/volumes/transmission_data/_data/completed:/data/completed #optional
 ```
 
-## Environment-variables
+### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
@@ -32,7 +32,7 @@ docker-compose file.
 | `PGID`                | group id for container user | `1000`                  |
 | `TZ`                  | specify the timezone        | `Etc/UTC`               |
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -41,7 +41,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | `config`                  | `/config`         | directory for config              |
 | `complete`                | `/music`          | directory for music               |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -49,7 +49,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ------------ |
 | `8686`         | `8686`                   | TCP      | webUI        |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -58,7 +58,7 @@ docker pull lscr.io/linuxserver/lidarr:latest
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "2.1"

wiki/docker/linuxserver_-_radarr.md

@@ -21,7 +21,7 @@ This namely causes the following line in the
       - /var/lib/docker/volumes/transmission_data/_data/completed:/data/completed #optional
 ```
 
-## Environment-variables
+### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
@@ -32,7 +32,7 @@ docker-compose file.
 | `PGID`                | group id for container user | `1000`                  |
 | `TZ`                  | specify the timezone        | `Etc/UTC`               |
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -41,7 +41,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | `config`                  | `/config`         | directory for config              |
 | `complete`                | `/movies`         | directory for music               |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -49,7 +49,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ------------ |
 | `7878`         | `7878`                   | TCP      | webUI        |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -58,7 +58,7 @@ docker pull lscr.io/linuxserver/radarr:latest
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "2.1"

wiki/docker/linuxserver_-_sonarr.md

@@ -21,7 +21,7 @@ This namely causes the following line in the
       - /var/lib/docker/volumes/transmission_data/_data/completed:/data/completed #optional
 ```
 
-## Environment-variables
+### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
@@ -32,7 +32,7 @@ docker-compose file.
 | `PGID`                | group id for container user | `1000`                  |
 | `TZ`                  | specify the timezone        | `Etc/UTC`               |
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -41,7 +41,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | `config`                  | `/config`         | directory for config              |
 | `complete`                | `/tv`             | directory for music               |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -49,7 +49,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ------------ |
 | `8989`         | `8989`                   | TCP      | webUI        |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -58,7 +58,7 @@ docker pull lscr.io/linuxserver/sonarr:latest
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "2.1"

wiki/docker/linuxserver_-_syncthing.md

@@ -10,7 +10,7 @@ The official container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following variables with the -e tag.
 
@@ -21,7 +21,7 @@ Set the following variables with the -e tag.
 | `TZ`        | Timezone         |         |
 | `UMASK_SET` | setting usermask |         |
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -29,7 +29,7 @@ Set the following volumes with the -v tag.
 | ------------------ | --------------- | ----------------------------------------------- |
 | `syncthing_config` | `/config`       | storage for config and possible downloaded data |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -39,7 +39,7 @@ Set the following ports with the -p tag.
 | `22000`        | `22000`                  | TCP      | Syncthing internal |
 | `21027`        | `21027`                  | UDP      | Syncthing internal |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/linuxserver_-_tvheadend.md

@@ -10,7 +10,7 @@ The official container and documentation was made by
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
@@ -22,7 +22,7 @@ docker-compose file.
 | `TZ`                  | specify the timezone        | `Europe/London`         |
 | `RUN_OPTS`          | specify the timezone          | ` `                     |
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -31,7 +31,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | `config`                  | `/config`       | directory for config              |
 | `tvdvr`                   | `/recordings`   | directory for storage             |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -49,7 +49,7 @@ docker pull lscr.io/linuxserver/tvheadend:latest
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "2.1"

wiki/docker/linuxserver_-_wireguard.md

@@ -18,21 +18,7 @@ It is also possible to give a list of clients separated by commas
 The following shows the two options.
 Then run `./rebuild.sh`
 
-## Usage
-
-### Retrieve Client Certificates by QR-Code
-
-The client certificates can be retrieved with the following command.
-`<peer-number>` is the number or identifier of the peer.
-
-```sh
-docker exec -it wireguard /app/show-peer <peer-number>
-```
-
-After running the command a QR-code should be displayed that describes the
-certificate.
-
-## Environment-Variables
+### Environment-Variables
 
 Set the following variables with the -e tag.
 
@@ -44,7 +30,7 @@ Set the following variables with the -e tag.
 | `SERVERURL` | URL of server   |         |
 | `PEERS`     | Number of peers |         |
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -52,7 +38,7 @@ Set the following volumes with the -v tag.
 | ------------------------- | --------------- | ----------------------- |
 | `wireguard`               | `/config`       | Configuration files     |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -60,7 +46,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `51820`        | `51820`                  | UDP      | VPN port    |
 
-## Additional
+### Additional
 
 There are some special variables to set.
 
@@ -68,7 +54,7 @@ There are some special variables to set.
 | ----------- | ---------------------- |
 | `--cap-add` | add linux capabilities |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -89,3 +75,22 @@ docker run --name=wireguard \
   --restart unless-stopped \
   -d lscr.io/linuxserver/wireguard:latest
 ```
+
+## Usage
+
+### Retrieve Client Certificates by QR-Code
+
+The client certificates can be retrieved with the following command.
+`<peer-number>` is the number or identifier of the peer.
+
+```sh
+docker exec -it wireguard /app/show-peer <peer-number>
+```
+
+After running the command a QR-code should be displayed that describes the
+certificate.
+
+### Add New Client to Existing WireGuard Installation
+
+To add a new client to the existing WireGuard installation increase the number
+of peers or append a peer to the list of peers specified in the [setup section](#set-up) section.

wiki/docker/mailserver_-_docker-mailserver.md

@@ -38,7 +38,7 @@ Finally if a reverse proxy is used check the
 
 Afterwards you're ready to go by once again running the `rebuild.sh` file.
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/mariadb.md

@@ -5,7 +5,15 @@ The official container and documentation was made by [mariadb](https://hub.docke
 The Docker container is mainly used in combination with other containers.
 To achieve this in the easiest way use a docker-compose file.
 
-## Environment-variables
+## Set-Up
+
+The mariadb Docker container is dependent on another container most of the time. 
+The exact setup will be described in the regarding entry.
+Nevertheless both environment variables and volumes are listed in the sections below.
+Nevertheless both environment variables and volumes and networks are listed in the sections below.
+These are needed most often.
+
+### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
@@ -17,10 +25,15 @@ docker-compose file.
 | `MYSQL_PASSWORD`      | set the mysql user password   |         |
 | `MYSQL_Database`      | specify mysql database to use |         |
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
 | Outside mount/volume name | Container mount  | Description               |
 | ------------------------- | ---------------- | ------------------------- |
 | `mysql`                   | `/var/lib/mysql` | storage for owncloud data |
+
+### Networks
+
+You can set networks in the `networks:` part of a docker-compose file to connect
+the database with other docker containers.

wiki/docker/massivedecks_-_client.md

@@ -0,0 +1,97 @@
+# massivedecks - client
+
+This is a [Docker](/wiki/docker.md) container for a [Massive Deecks](/wiki/game/massive_decks.md)
+client.
+Due to ease of use this entry will also feature the server container.
+The official container and documentation was made by
+[Lattyware](https://github.com/Lattyware/massivedecks).
+This docker-rebuild is made up by a `docker-compose.yml` file.
+In addition to the client and server containers a [postgres container](/wiki/docker/postgres.md)
+needs to be connected.
+
+## Set-up
+
+Create the files `rebuild.sh`, `.env` and `docker-compose.yml` at the same
+place.
+Make sure to set `POSTGRES_PASSWORD`.
+Change the settings according to your needs and run `./rebuild.sh` afterwards.
+
+### Ports
+
+Set the following ports in the `ports:` section.
+
+| Container Port | Recommended outside port | Protocol | Description |
+| -------------- | ------------------------ | -------- | ----------- |
+| `8080`         | `8080`                   | TCP      | WebUI       |
+
+### Environment-variables
+
+Set the following environment-variables in the `environment:` section of the
+docker-compose file.
+
+| Name        | Usage                   | Default           |
+| ----------- | ----------------------- | ----------------- |
+| `NODE_ENV`  | Setting the environment | `production`      |
+
+### rebuild.sh
+
+```sh
+#!/bin/sh
+docker-compose down
+docker pull postgres:14
+docker pull ghcr.io/lattyware/massivedecks/server:latest-release
+docker pull ghcr.io/lattyware/massivedecks/client:latest-release
+docker-compose up -d
+```
+
+### docker-compose.yml
+
+```yml
+version: "3.3"
+services:
+  storage:
+    image: "postgres:14"
+    restart: unless-stopped
+    environment:
+      - POSTGRES_USER=massivedecks
+      - POSTGRES_PASSWORD=<password>
+    networks:
+      - internal
+    volumes:
+      - storage-volume:/var/lib/postgresql/data
+
+  server:
+    image: "ghcr.io/lattyware/massivedecks/server:latest-release"
+    restart: unless-stopped
+    environment:
+      - NODE_ENV=production
+    depends_on:
+      - storage
+    networks:
+      - internal
+    configs:
+      - source: md_server_config
+        target: /md/config.json5
+
+  client:
+    image: "ghcr.io/lattyware/massivedecks/client:latest-release"
+    restart: unless-stopped
+    depends_on:
+      - server
+    networks:
+      - internal
+    ports:
+      - "8080:8080"
+
+networks:
+  internal:
+    external: false
+
+volumes:
+  storage-volume:
+    driver: local
+
+configs:
+  md_server_config:
+    external: true
+```

wiki/docker/matrixdotorg_-_synapse.md

@@ -11,7 +11,7 @@ This docker-rebuild is made up by a `docker-compose.yml` file.
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
@@ -24,7 +24,7 @@ docker-compose file.
 | `GID`                 | group id for synapse user | `1000`                  |
 | `TZ`                  | specify the timezone      | `Europe/London`         |
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -32,7 +32,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | ------------------------- | --------------- | --------------------------------- |
 | `synapse`                 | `/data`         | directory for storage and configs |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -40,7 +40,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ---------------------- |
 | `8008`         | `443`                    | TCP      | matrix homeserver port |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -49,7 +49,7 @@ docker pull matrixdotorg/synapse:latest
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 services:

wiki/docker/mikenye_-_picard.md

@@ -11,7 +11,7 @@ The official container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following variables with the -e tag.
 
@@ -22,7 +22,7 @@ Set the following variables with the -e tag.
 | `DISPLAY_WIDTH`  | Width of software   | `1280`  |
 | `DISPLAY_HEIGHT` | Height of software  | `768`   |
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -31,7 +31,7 @@ Set the following volumes with the -v tag.
 | `config`                  | `/config`       | Configuration files       |
 | `media_music`             | `/storage`      | Location for audio files  |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -41,7 +41,7 @@ Set the following ports with the -p tag.
 | `5900`         | `5900`                   | TCP      | VNC                        |
 | `8000`         | `8000`                   | TCP      | Picard browser integration |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/mysql.md

@@ -6,7 +6,14 @@ The official container and documentation was made by
 The Docker container is mainly used in combination with other containers.
 To achieve this in the easiest way use a docker-compose file
 
-## Environment-variables
+## Set-Up
+
+The mysql Docker container is dependent on another container most of the time. 
+The exact setup will be described in the regarding entry.
+Nevertheless both environment variables and volumes and networks are listed in the sections below.
+These are needed most often.
+
+### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
@@ -18,7 +25,7 @@ docker-compose file.
 | `MYSQL_PASSWORD`      | set the mysql user password   |         |
 | `MYSQL_Database`      | specify mysql database to use |         |
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -26,7 +33,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | ------------------------- | ---------------- | ------------------------- |
 | `mysql`                   | `/var/lib/mysql` | storage for owncloud data |
 
-## Networks
+### Networks
 
 You can set networks in the `networks:` part of a docker-compose file to connect
 the database with other docker containers.

wiki/docker/nextcloud.md

@@ -23,7 +23,7 @@ mariadb:9
 Make sure to substitute all the occurences of the `:latest` tag accordingly.
 Updating has to be done manually so nothing breaks.
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -31,7 +31,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | ------------------------- | --------------- | ---------------------------------------- |
 | `nextcloud`               | `/var/www/html` | storage for nextcloud plugins and config |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -39,7 +39,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ----------- |
 | `80`           | `80`                     | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -49,7 +49,7 @@ docker pull mariadb:latest
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: '2'

wiki/docker/nginx.md

@@ -11,7 +11,7 @@ This docker-rebuild is made up by a `docker-compose.yml` file.
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -19,7 +19,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | ------------------------- | -------------------- | --------------------------- |
 | `nginx`                   | `/etc/nginx/conf.d/` | directory for nginx configs |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -28,7 +28,7 @@ Set the following ports in the `ports:` section.
 | `80`           | `80`                     | TCP      | http port   |
 | `443`          | `443`                    | TCP      | https port  |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -37,7 +37,7 @@ docker pull nginx:latest
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "2"

wiki/docker/olbat_-_cupsd.md

@@ -9,7 +9,7 @@ The official container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -18,7 +18,7 @@ Set the following volumes with the -v tag.
 | `cups`                    | `/etc/cups`     | configuration for printers, etc |
 | `/var/run/dbus`           | `/var/run/dbus` | connection to host dbus         |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -26,11 +26,11 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------------- |
 | `631`          | `631`                    | TCP      | cups server webui |
 
-## Additional
+### Additional
 
 The default username is `print`, the default password is `print`.
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/ollama_-_ollama.md

@@ -0,0 +1,40 @@
+# ollama - ollama
+
+This is a [Docker](/wiki/docker.md) container for an ollama server.
+The official container and documentation was made by
+[ollama](https://hub.docker.com/r/ollama/ollama).
+
+## Set-up
+
+Create the file `rebuild.sh`.
+Change the settings according to your needs and run `./rebuild.sh` afterwards.
+
+## Ports
+
+Set the following ports in the `ports:` section.
+
+| Container Port | Recommended outside port | Protocol  | Description         |
+| -------------- | ------------------------ | --------- | ------------------- |
+| `11434`        | `11434`                  | TCP       | Communications port |
+
+## Volumes
+
+Set the following volumes with the -v tag.
+
+| Outside mount/volume name | Container mount | Description   |
+| ------------------------- | --------------- | ------------- |
+| `ollama`                  | `/root/.ollama` | Ollama data |
+
+## rebuild.sh
+
+```sh
+#!/bin/sh
+docker stop ollama
+docker rm ollama
+docker pull ollama/ollama
+docker run --name ollama \
+    --restart unless-stopped \
+    -p 11434:11434 \
+    -v ollama:/root/.ollama \
+    -d ollama/ollama
+```

wiki/docker/open-webui_-_open-webui.md

@@ -0,0 +1,41 @@
+# open-webui - open-webui
+
+This is a [Docker](/wiki/docker.md) container for a Open WebUI server.
+The official container and documentation was made by
+[open-webui](https://github.com/open-webui/open-webui).
+
+## Set-up
+
+Create the file `rebuild.sh`.
+Change the settings according to your needs and run `./rebuild.sh` afterwards.
+
+## Ports
+
+Set the following ports in the `ports:` section.
+
+| Container Port | Recommended outside port | Protocol  | Description   |
+| -------------- | ------------------------ | --------- | ------------- |
+| `11434`        | `8080`                   | TCP       | WebUI         |
+
+## Volumes
+
+Set the following volumes with the -v tag.
+
+| Outside mount/volume name | Container mount     | Description     |
+| ------------------------- | ------------------- | --------------- |
+| `open-webui`              | `/app/backend/data` | Open WebUI data |
+
+## rebuild.sh
+
+```sh
+#!/bin/sh
+docker stop openwebui
+docker rm openwebui
+docker pull ghcr.io/open-webui/open-webui:main
+docker run --name openwebui \
+    --restart unless-stopped \
+    -p 11434:8080 \
+    -v open-webui:/app/backend/data \
+    -d ghcr.io/open-webui/open-webui:main
+
+```

wiki/docker/owncloud.md

@@ -13,7 +13,7 @@ Docker container.
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -22,7 +22,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | `owncloud`                | `/var/www/html`        | storage for owncloud plugins |
 | `config`                  | `/var/www/html/config` | storage for owncloud config  |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -30,7 +30,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ----------- |
 | `80`           | `80`                     | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -40,7 +40,7 @@ docker pull mariadb
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "3.1"

wiki/docker/oznu_-_docker-cloudflare-ddns.md

@@ -10,7 +10,7 @@ The official container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment variables
+### Environment variables
 
 Set the following variables with the -e tag.
 
@@ -20,7 +20,7 @@ Set the following variables with the -e tag.
 | `ZONE=`       | append your domain (for example `main.com`)            |
 | `SUBDOMAIN`   | append your subdomain (for example `dynamic`)          |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/oznu_-_onedrive.md

@@ -8,7 +8,7 @@ The official container and documentation was made by [oznu](https://hub.docker.c
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following variables with the -e tag.
 
@@ -17,7 +17,7 @@ Set the following variables with the -e tag.
 | `PUID` | UserID  |         |
 | `PGID` | GroupID |         |
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -26,7 +26,7 @@ Set the following volumes with the -v tag.
 | `onedrive_config`         | `/config`       | configuration storage for the server connection |
 | `onedrive_doc`            | `/documents`    | storage for downloaded documents                |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/portainer_-_agent.md

@@ -10,7 +10,7 @@ The official container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -19,7 +19,7 @@ Set the following volumes with the -v tag.
 | `/var/run/docker.sock`    | `/var/run/docker.sock`    | connect your running docker containers |
 | `/var/lib/docker/volumes` | `/var/lib/docker/volumes` | connect running docker volumes         |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -27,7 +27,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | -------------------- |
 | `9001`         | `9001`                   | TCP      | Portainer agent port |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/portainer_-_portainer.md

@@ -10,7 +10,7 @@ The official container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -19,7 +19,7 @@ Set the following volumes with the -v tag.
 | `portainer`               | `/data`                | configuration directory                           |
 | `/var/run/docker.sock`    | `/var/run/docker.sock` | connection to local docker containers and volumes |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -27,7 +27,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `9000`         | `9000`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/postgres.md

@@ -1,4 +1,4 @@
-# Postgres
+# postgres
 
 This is a [Docker](/wiki/docker.md) container for a postgresql database.
 The official container and documentation was made by
@@ -6,7 +6,15 @@ The official container and documentation was made by
 The Docker container is mainly used in combination with other containers.
 To achieve this in the easiest way use a docker-compose file
 
-## Environment-variables
+## Set-Up
+
+The postgres Docker container is dependent on another container most of the time. 
+The exact setup will be described in the regarding entry.
+Nevertheless both environment variables and volumes are listed in the sections below.
+Nevertheless both environment variables and volumes and networks are listed in the sections below.
+These are needed most often.
+
+### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
@@ -18,7 +26,7 @@ docker-compose file.
 | `POSTGRES_PASSWORD`      | set the postgres user password   |         |
 | `POSTGRES_DB`            | specify postgres database to use |         |
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -27,7 +35,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | `postgres`                | `/var/lib/postgresql/data` | storage for owncloud data    |
 | `postgres_config`         | `/config/sql`              | initial sql setup and config |
 
-## Networks
+### Networks
 
 You can set networks in the `networks:` part of a docker-compose file to connect
 the database with other docker containers.

wiki/docker/prologic_-_golinks.md

@@ -10,7 +10,7 @@ The official container and documentation was made by
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -18,7 +18,7 @@ Set the following volumes with the -v tag.
 | ------------------------- | --------------- | -------------------------- |
 | `golinks`                 | `/search.db`    | database with all commands |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -26,7 +26,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `8000`         | `8000`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -35,7 +35,7 @@ docker pull prologic/golinks:latest
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "3.1"

wiki/docker/prologic_-_gopherproxy.md

@@ -9,7 +9,7 @@ The official container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -17,7 +17,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ---------------------------------------- |
 | `8000`         | `8000`                   | TCP      | port to proxy the gopher site as http to |
 
-## Additional
+### Additional
 
 There are some special variables to set.
 
@@ -25,7 +25,7 @@ There are some special variables to set.
 | ------ | ------------------------------------------------------------- |
 | `-uri` | define the gopher site to proxy (just 'domain.tld' is enough) |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/prologic_-_todo.md

@@ -9,7 +9,7 @@ The official container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -17,7 +17,7 @@ Set the following volumes with the -v tag.
 | ------------------------- | ---------------------- | ---------------------- |
 | `todo`                    | `/go/src/todo/todo.db` | Database for todo list |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -25,7 +25,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `8000`         | `8000`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/rblsb_-_synctube.md

@@ -9,13 +9,13 @@ There is no official pre-build on docker-hub.
 ## Set-up
 
 First of all create a folder for your `rebuild.sh`.
-After that clone synctube from [github](https://github.com/rblsb/synctube) into
+After that clone synctube from [GitHub](https://github.com/rblsb/synctube) into
 a folder within the just created folder.
 Then build the image inside the git folder with `docker build -t synctube .`.
 Set the variables, volumes and ports according and run the `rebuild.sh`.
 
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -23,7 +23,7 @@ Set the following volumes with the -v tag.
 | ------------------------- | ------------------- | ------------------- |
 | `synctube`                | `/usr/src/app/user` | Configuration files |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -31,7 +31,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `4200`         | `4200`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/redis.md

@@ -6,10 +6,23 @@ The official container and documentation was made by
 The Docker container is mainly used in combination with other containers.
 To achieve this in the easiest way use a docker-compose file.
 
-## Volumes
+## Set-Up
+
+The redis Docker container is dependent on another container most of the time. 
+The exact setup will be described in the regarding entry.
+Nevertheless both volumes and networks are listed in the sections below.
+These are needed most often.
+
+### Volumes
+
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
 | Outside mount/volume name | Container mount | Description          |
 | ------------------------- | --------------- | -------------------- |
 | `redis`                   | `/data`         | storage for all data |
+
+### Networks
+
+You can set networks in the `networks:` part of a docker-compose file to connect
+the database with other docker containers.

wiki/docker/rlister_-_hastebin.md

@@ -9,7 +9,7 @@ The official container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following variables with the -e tag.
 
@@ -17,7 +17,7 @@ Set the following variables with the -e tag.
 | -------------- | ----------------------- | ------- |
 | `STORAGE_TYPE` | Type to store the datas | `file`  |
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -25,7 +25,7 @@ Set the following volumes with the -v tag.
 | ------------------------- | --------------- | -------------------------- |
 | `hastebin`                | `/app/data`     | storage directory for data |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -33,7 +33,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `7777`         | `7777`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/samba.md

@@ -10,7 +10,7 @@ The official container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -23,7 +23,7 @@ Set the following volumes with the -v tag.
 | `samba_etc`               | `/etc`             | etc directory of samba server |
 | `samba_log`               | `/var/log/samba`   | storage for samba logs        |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -32,7 +32,7 @@ Set the following ports with the -p tag.
 | `139`          | `139`                    | TCP      | Samba internal |
 | `445`          | `445`                    | TCP      | Samba internal |
 
-## Additional
+### Additional
 
 There are some special variables to set.
 
@@ -42,7 +42,7 @@ There are some special variables to set.
 | `-w \<workgroup\>`                                                        | define workgroup |
 | `-s \<name;path\>(;browse;readonly;guest;users;admins;writelist;comment)` | define shares    |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/searx_-_searx.md

@@ -10,7 +10,7 @@ The official container and documentation was made by
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -19,7 +19,7 @@ Set the following volumes with the -v tag.
 | `searx_etc`               | `/etc/searx`     | storage for etc  |
 | `searx_log`               | `/var/log/uwsgi` | storage for logs |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -27,7 +27,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `8080`         | `8080`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -35,7 +35,7 @@ docker-compose down
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```sh
 version: "2.1"

wiki/docker/sinusbot_-_docker.md

@@ -0,0 +1,116 @@
+# sinusbot - docker
+
+This is a [Docker](/wiki/docker.md) container for a [Sinusbot](/wiki/sinusbot.md).
+The Server consists of a single Docker container.
+
+## Set-up
+
+Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
+
+The `docker-compose.yml` file includes a network section.
+This is only needed if the [Teamspeak](/wiki/teamspeak.md) server is set up on the same machine.
+If it is not the network `teamspeak` may be removed.
+If it Teamspeak and Sinusbot are set up on the same machine make sure to include the `teamspeak`
+network in the [Teamspeak Docker container](/wiki/docker/teamspeak.md) and set an alias.
+Include the follwing lines in your teamspeak `docker-compose.yml` file under the `teamspeak3`
+service.
+
+```yml
+networks:
+  teamspeak:
+    aliases:
+      - ts3.docker.local
+```
+
+Add the following lines at the end of the `docker-compose.yml` or add it to the definition of
+already existing networks.
+
+```yml
+networks:
+  teamspeak:
+    external: true
+```
+
+Finally make sure to create the external network `teamspeak` before starting the containers.
+This can be done by running the following command.
+
+```sh
+docker network create teamspeak
+```
+
+The Teamspeak server can then be found by Sinusbot under host `ts3.docker.local` and port `9987`.
+
+Change the other settings according to your needs and run `./rebuild.sh` afterwards.
+
+### Environment-variables
+
+Set the following environment-variables in the `environment:` section of the
+docker-compose file.
+
+| Name        | Usage                          | Default |
+| ----------- | ------------------------------ | ------- |
+| `UID`       | User userid to run gitea       |         |
+| `GID`       | User groupid to run gitea      |         |
+
+### Volumes
+
+Set the following volumes in the `volumes:` section of the docker-compose file.
+
+| Outside mount/volume name | Container mount         | Description                           |
+| ------------------------- | ----------------------- | ------------------------------------- |
+| `sinusbot_scripts`        | `/opt/sinusbot/scripts` | storage for the sinusbot scripts      |
+| `sinusbot_data`           | `/opt/sinusbot/data`    | storage for the most of sinusbot data |
+
+### Ports
+
+Set the following ports in the `ports:` section.
+
+| Container Port | Recommended outside port | Protocol | Description            |
+| -------------- | ------------------------ | -------- | ---------------------- |
+| `8087`         | `8087`                   | TCP      | WebUI                  |
+
+### Networks
+
+Set the following networks in the `networks:` section of the docker-compose file.
+
+| Name        | Usage                        |
+| ----------- | ---------------------------- |
+| `teamspeak` | connect with local teamspeak |
+
+
+### rebuild.sh
+
+```sh
+#!/bin/sh
+docker-compose down
+docker pull sinusbot/docker:latest
+docker-compose up -d
+```
+
+### docker-compose.yml
+
+```yml
+version: "3.3"
+services:
+  sinusbot:
+    image: "sinusbot/docker:latest"
+    restart: unless-stopped
+    environment:
+      - UID=1000
+      - GID=1000
+    networks:
+      - teamspeak
+    volumes:
+      - sinusbot_scripts:/opt/sinusbot/scripts
+      - sinusbot_data:/opt/sinusbot/data
+
+networks:
+  teamspeak:
+    external: true
+
+volumes:
+  sinusbot_scripts:
+    driver: local
+  sinusbot_data:
+    driver: local
+```

wiki/docker/sissbrueckner_-_linkding.md

@@ -18,7 +18,7 @@ docker exec -it linkding python manage.py createsuperuser --username=joe --email
 
 You will be asked for a password via the commandline.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -26,7 +26,7 @@ Set the following volumes with the -v tag.
 | ------------------------- | ---------------------- | --------------------------- |
 | `linkding`                | `/etc/linkding/data`   | storage for persistent data |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -34,7 +34,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `9090`         | `9090`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/spikecodes_-_libreddit.md

@@ -10,7 +10,7 @@ The official container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -18,7 +18,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `8080`         | `8080`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh