firefox/qt: added dark mode troubleshooting

minecraft: added mod guide to docker image
audio: added and linked openaudible
package managers: added version-specific installation of AUR and manual installation of PKGBUILD

templates/android-program.md

@@ -0,0 +1,14 @@
+# /name/
+
+[/name/]() is a /description.
+
+## Setup
+
+On [Android](/wiki/android.md) /name/ is available on 
+[F-Droid](/wiki/android/f-droid.md)/the [Google Play store](/wiki/android.md#app-store) in a
+package called [/name/]().
+
+## Usage
+
+This section addresses the usage of /name/.
+/basic description for usage/

templates/docker-compose.md

@@ -13,15 +13,20 @@ Create the files `rebuild.sh`, `.env` and `docker-compose.yml` at the same
 place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
-Set the following variables with the -e tag.
+Set the following variables in the `environment:` section.
 
 | Name       | Usage         | Default |
 | ---------- | ------------- | ------- |
 | `/name/`   | /description/ |         |
 
-## Ports
+<!-- ### Environment-variables -->
+<!---->
+<!-- The environment variables are set via the `.env` file and listed in the -->
+<!-- [corresponding section](#env). -->
+<!---->
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -29,7 +34,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | --------- | ------------- |
 | `/port/`       | `/port/`                 | /TCP/UDP/ | /description/ |
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -37,17 +42,20 @@ Set the following volumes with the -v tag.
 | ------------------------- | --------------- | ------------- |
 | `/volume name/`           | `/mount point/` | /description/ |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
+#!/bin/sh
+docker-compose down
+docker-compose up -d
 ```
 
-## .env
+<!-- ### .env -->
-
+<!---->
-```sh
+<!-- ```sh -->
-```
+<!-- ``` -->
-
+<!---->
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 ```

templates/program.md

@@ -5,9 +5,15 @@
 ## Setup
 
 The /name/ program can be installed [/via GitHub/]().
-Alternatively many linux package managers package /name/ in the `/package/`
+Alternatively many [Linux](/wiki/linux.md) [package managers](/wiki/linux/package_manager.md) 
-package.
+package /name/ in the `/package/`.
+The software can be setup via [Docker](/wiki/docker.md) with the [/docker name/ image]().
 
 ## Usage
 
+This section addresses the usage of /name/.
 /basic description for usage/
+
+## Troubleshooting 
+
+This section will focus on errors and the fixing of errors of /name/.

wiki/acer.md

@@ -0,0 +1,13 @@
+# Acer
+
+[Acer](https://www.acer.com) is a company that produces computers.
+
+## Troubleshooting 
+
+This section focusses on vendor specific problems and ways how to fix them.
+
+### Recovering the BIOS Password 
+
+Acer laptops usually feature a 8-digit BIOS password.
+If it was lost it can easily be regenerated/recovered by using the website
+[BIOSBug](https://www.biosbug.com/acer).

wiki/android.md

@@ -4,6 +4,23 @@
 [Linux](/wiki/linux.md) kernel.
 It is designed primarily for mobile devices with touch screens like tablets or smart phones.
 
+## Managing the Data
+
+The data and files stored on Android
+[smart devices](/wiki/smart_device.md#smartphones-and-tablet-computers) are sometimes needed on
+computers.
+
+For [Windows](/wiki/windows.md) this can easily be achieved by connecting it via USB.
+No further software is needed as the device manager handles the phone correctly most of the times.
+
+For [Linux-based systems](/wiki/linux.md) the
+[device](/wiki/smart_device.md#smartphones-and-tablet-computers) also has to be connected to the
+computer.
+But in this case also a software is needed to [mount it](/wiki/linux/disk-management.md#mounting),
+this software/program is called [android-file-transfer](/wiki/linux/android-file-transfer.md).
+For further information and a guide on how to mount a Android device correctly navigate to the
+[corresponding section](/wiki/linux/android-file-transfer.md#mounting-and-unmounting-android-device).
+
 ## App Store
 
 The most used app store of android is the [Google Play Store](https://play.google.com/).
@@ -11,7 +28,7 @@ A free and open-source alternative to it is [F-Droid](/wiki/android/f-droid.md)
 open-source software.
 
 A list of open-source software options is also available on Alberto Mosconis
-[Github](/wiki/git.md#server-with-web-interface) repository
+[Github](/wiki/git_%28general%29.md#server-with-web-interface) repository
 [foss apps](https://github.com/albertomosconi/foss-apps/tree/main).
 
 Additionally open-source apps can be installed from source using
@@ -26,6 +43,40 @@ This section addresses various useful applications.
   storage.
 - [Markor](https://github.com/gsantner/markor) is a text editor supporting
   [Markdown](/wiki/markup_language.md)
+- [SystemUI Tuner](https://play.google.com/store/apps/details?id=com.zacharee1.systemuituner) is an
+  application that allows various small tweaks for the Android user interface.
+- [SimpleMarkdown](https://f-droid.org/packages/com.wbrawner.simplemarkdown.free/) is another text
+  editor made for Markdown. It does work a bit better with a [NextCloud](/wiki/nextcloud.md).
+
+## Improve Security and Privacy
+
+Security and privacy are important topics, especially so when dealing with mobile phones.
+This section focusses on improving them on a standard Android system.
+
+The Elecronic Frontier Foundation recommends the following changes in their guide 
+[Guide](https://ssd.eff.org/module/how-to-get-to-know-android-privacy-and-security-settings).
+
+- [2FA](#multi-factor-authentication)
+- A strong password (though the usage of biometrics is not recommended due to the possibility of
+  being physically forced to unlock a phone with them)
+- Privacy permission
+- Find my device
+- Theft protection
+- Google privacy checkup
+- Backups (though the usage of them gives data to Google, so it may rather be turned off)
+- Disable WEP networks
+- Obscure lockscreen notifications
+
+The YouTube Channel 9to5Google also has a 
+[video on security and privcacy](https://www.youtube.com/watch?v=eswIeNxSIqo) which additionally
+suggest the following changes.
+
+- Alert when clipboard is accessed
+- Enable app pinnig
+
+Another option to add which may not improve security or privacy but improves usability - especially
+if a difficult passphrase is used - is the enabling of "Extend Unlock".
+There "Trusted Devices" can be set or the "On-body Detection" can be enabled.
 
 ## Multi-Factor Authentication
 
@@ -52,7 +103,7 @@ It is possible that some custom ROMs require the user to
 
 Unlocking the bootloader can be a bit challenging for some vendors especially.
 
-For [smartphones and tablets](/wiki/smart_devices.md#smartphones-and-tablet-computers) made by
+For [smartphones and tablets](/wiki/smart_device.md#smartphones-and-tablet-computers) made by
 Xiaomi there are some steps that have to be done to unlock the bootloader.
 This section is based on an
 [article about unlocking the bootloader](https://new.c.mi.com/global/post/101245) on Xiaomi

wiki/android/droidcam.md

@@ -2,7 +2,7 @@
 
 [DroidCam](https://www.dev47apps.com/) is an App developed and published
 by Dev47Apps for [Android](/wiki/android.md) systems.
-It enables a [smartphone](/wiki/smart_devices.md) to be used as [webcam](/wiki/webcams.md).
+It enables a [smartphone](/wiki/smart_device.md) to be used as [webcam](/wiki/webcam.md).
 
 ## Setup
 
@@ -19,7 +19,7 @@ Alternatively most [Linux systems](/wiki/linux/package_manager.md) feature a pac
 
 ## Usage
 
-To initiate a connection between the [smartphone](/wiki/smart_devices.md) and the computer first
+To initiate a connection between the [smartphone](/wiki/smart_device.md) and the computer first
 start the app on the smartphone.
 Make sure to be connected to the same W-LAN as the computer or alternatively connect them with an
 USB-cable.
@@ -27,7 +27,7 @@ After starting the application an IP and a port will be displayed.
 These have to be pasted into the form that is shown on the computer after starting the corresponding
 program.
 After pressing `Connect` the link will be established.
-The [video feed](/wiki/webcams.md) can then be used in other programs such as Discord or
+The [video feed](/wiki/webcam.md) can then be used in other programs such as Discord or
 [Matrix](/wiki/matrix.md).
 Additionally it can be piped into [OBS](/wiki/obs.md) to edit it more or create a scene.
 Despite the option the separate app [DroidCam OBS](https://www.dev47apps.com/obs/) is not

wiki/android/gadgetbridge.md

@@ -3,8 +3,8 @@
 [Gadgetbridge](https://codeberg.org/Freeyourgadget/Gadgetbridge/) is a free and open source software
 for [Android](/wiki/android.md) systems.
 It is a cloudless replacement for proprietary software for
-[smart devices](/wiki/smart_devices.md), but is especially designed for
+[smart devices](/wiki/smart_device.md), but is especially designed for
-[smartwatches and smart bands](/wiki/smart_devices.md#smartwatches-and-smart-bands).
+[smartwatches and smart bands](/wiki/smart_device.md#smartwatches-and-smart-bands).
 
 ## Setup
 
@@ -42,16 +42,25 @@ Afterwards the device will be paired and connected.
 ### Add Weather Function
 
 For correct displaying of weather data an additional app is needed.
-An example for this is the
+This section is based on the official documentation and recommendation that can be found on
-[Weather notification app](https://f-droid.org/en/packages/ru.gelin.android.weather.notification/).
+[Gadgetbridges Codeberg page](https://codeberg.org/Freeyourgadget/Gadgetbridge/wiki/Weather#user-content-install-and-configure-openweatherprovider).
-Install it, check the Gadgetbridge option inside the Weather notification app to on and set the
+
-location.
+An example for this is the [Breezy Weather app](https://github.com/breezy-weather/breezy-weather)
-Finally create an account at [OpenWeather](https://home.openweathermap.org).
+which is available on the F-Droid store.
-On that website create an API key and paste it into the according setting in the Weather
+Install and configure it to your needs.
-notification app.
+Then check the Gadgetbridge option insdie the Breezy Weather app.
-Finally set the desired location in the Gadgetbridge app inside the settings.
 Afterwards the weather function will be working.
 
+In the past an application named
+[Weather Notification](https://f-droid.org/en/packages/ru.gelin.android.weather.notification/)
+was often used.
+The installation and configuration process was similar but an
+[OpenWeather](https://home.openweathermap.org)  API key had to be specified in the Weather
+Notification app.
+For this an account on [OpenWeather](https://home.openweathermap.org) was needed.
+Due to different API versions Weather Notification currently does not work.
+However it is possible that an update to the application will bring a fix in the future.
+
 ### Install Watchfaces
 
 Watchfaces can be installed by using Gadgetbridges `File Installer` option that is available in the
@@ -60,3 +69,13 @@ Watchface files for Xiaomi/Amazfit devices can be downloaded on
 [amazfitwatchfaces.com](https://amazfitwatchfaces.com/).
 The same catalog is also available as an
 [Android app on the Google Play Store](https://play.google.com/store/apps/details?id=com.amazfitwatchfaces.st).
+
+This section is based on a 
+[Reddit post by myhairisawesome](https://www.reddit.com/r/Huawei/comments/1dexenl/watch_fit_3_is_there_a_way_to_create_custom_watch/).
+
+### Download Maps
+
+To download one or more map files to display them for activity GPS data on the mobile phone
+navigate to the main `Settings`.
+Then Select `Maps` and set the `Folder` aswell as download the map and move it into the selected
+folder.

wiki/android/ip_webcam.md

@@ -2,7 +2,10 @@
 
 [IP Webcam](https://play.google.com/store/apps/details?id=com.pas.webcam&hl=de&gl=US) is an App
 developed and published by Pavel Khlebovich for [Android](/wiki/android.md) systems.
-It enables a [smartphone](/wiki/smart_devices.md) to be used as [webcam](/wiki/webcams.md).
+It enables a [smartphone](/wiki/smart_device.md) to be used as [webcam](/wiki/webcam.md).
+
+When wanting to stream the screen and not the camera the application
+[ScreenStream](/wiki/android/screenstream.md) can be used.
 
 ## Setup
 
@@ -12,7 +15,7 @@ On [Android](/wiki/android.md) IP Webcam is available on the
 
 ## Usage
 
-To initiate a connection between the [smartphone](/wiki/smart_devices.md) and the computer first
+To initiate a connection between the [smartphone](/wiki/smart_device.md) and the computer first
 start the app on the smartphone.
 Make sure to be connected to the same W-LAN as the computer or alternatively connect them with an
 USB-cable.

wiki/android/ir_remote.md

@@ -2,7 +2,7 @@
 
 [IR Remote](https://gitlab.com/divested-mobile/irremote) is a free and open-source App developed
 for [Android](/wiki/android.md) systems.
-It can use a [smartphone](/wiki/smart_devices.md#smartphones-and-tablet-computers) that is capable
+It can use a [smartphone](/wiki/smart_device.md#smartphones-and-tablet-computers) that is capable
 of sending [infrared](/wiki/infrared.md) signals to be used as an
 [infrared remote control](/wiki/infrared.md#remote-controls)
 

wiki/android/lineageos.md

@@ -2,7 +2,7 @@
 
 [LineageOS](https://lineageos.org/) - or short Lineage - is a custom
 [Android](/wiki/android.md)-ROM and operating system for
-[Smartphones and Tablets](/wiki/smart_devices.md#smartphones-and-tablet-computers) with mostly free
+[Smartphones and Tablets](/wiki/smart_device.md#smartphones-and-tablet-computers) with mostly free
 and open-source software.
 It was formerly known as CyanogenMod.
 

wiki/android/screenstream.md

@@ -0,0 +1,13 @@
+# ScreenStream
+
+[ScreenStream](https://f-droid.org/de/packages/info.dvkr.screenstream/) is an application that
+allows to stream the screen via HTTP.
+
+When wanting to stream the camera and not the screen the application
+[IP Webcam](/wiki/android/ip_webcam.md) can be used.
+
+## Setup
+
+On [Android](/wiki/android.md) ScreenStream is available on 
+[F-Droid](/wiki/android/f-droid.md) in a package called
+[ScreenStream](https://f-droid.org/de/packages/info.dvkr.screenstream/).

wiki/android/tasker.md

@@ -0,0 +1,38 @@
+# Tasker
+
+[Tasker](https://tasker.joaoapps.com/) is a tool to automate various settings and other things on
+an [Android-phone](/wiki/android.md).
+
+## Setup
+
+On [Android](/wiki/android.md) /name/ is available on the
+[Google Play store](/wiki/android.md#app-store) in a package called
+[Tasker](https://play.google.com/store/apps/details?id=net.dinglisch.android.taskerm).
+
+Additionally the installation of [Tasker Settings](https://github.com/joaomgcd/TaskerSettings) is
+recommended.
+Please note that on the [Github releases page](https://github.com/joaomgcd/TaskerSettings/releases)
+there are different versions to be used with Xiaomi-phones.
+
+Another recommended action to be taken is to grant Tasker permission to write secure settings.
+This has to be done for Tasker to be able to turn on or off Wifi and Location.
+Allowing Tasker to set these settings can be done by the following command that has to be run on a
+computer with the corresponding phone connected via USB and USB-debugging enabled.
+
+```sh
+adb shell pm grant net.dinglisch.android.taskerm android.permission.WRITE_SECURE_SETTINGS
+```
+
+`adb` is also often used to install [LineageOS](/wiki/android/lineageos.md).
+
+## Usage
+
+This section addresses the usage of Tasker.
+
+On Tasker profiles, tasks and more can be manually added and edited.
+An easier way to get things started is importing premade Tasker projects from
+[TaskerNet](https://taskernet.com/?public).
+
+Recommended TaskerNet-projects are the following.
+
+- Flip To Shhh

wiki/audio.md

@@ -10,8 +10,9 @@ Podcasts need a so called Podcatcher.
 A Podcatcher is used to subscribe to podcasts and download them automatically.
 For Linux specific music software navigate to the corresponding
 [wiki entry](/wiki/linux/audio.md).
-For voice based communication navigate to the [communication article](/wiki/communication.md) and
+For voice based communication, social platforms or messengers navigate to the
-the corresponding [VoIP section](/wiki/communication.md#voip).
+[communication article](/wiki/communication.md) and the corresponding
+[section](/wiki/communication.md#social-platforms-messengers-and-voip-services).
 For headphones navigate to the [headphones article](/wiki/headphones.md):
 
 ## Technical Specifications
@@ -106,6 +107,18 @@ The corresponding client software is handled in the server softwares wiki entry.
   It is self-hostable and can be dockerized.
   It has a web-interface and does not feature client software.
 
+#### Obtaining Audio Files from Different Services
+
+[YouTube](/wiki/youtube.md) features a wide variety of uploaded music and audiobooks.
+Using programs like [yt-dl](/wiki/youtube.md#downloading-youtube-videos) they can be downloaded.
+
+[Audible](https://www.audible.de/) is a popular service that makes sells audibooks.
+After purchasing an audiobook it can be downloaded directly from Audible after navigating to the
+`Library` tab and selecting `Download`.
+Another option is to use [OpenAudible](/wiki/openaudible.md).
+This program features various functions to manage Audible audiobooks that include download,
+converting and splitting.
+
 ## Digitalizing and Analyzing Physical Mediums
 
 This section focusses on physical audio mediums like CDs, their digitalization to a digital audio

wiki/betterdiscord.md

@@ -0,0 +1,86 @@
+# BetterDiscord
+
+[BetterDiscord](https://betterdiscord.app) is an unofficial extension to
+[Discord](/wiki/discord.md) which allows to add various functionality through plugins and new
+themes.
+
+## Setup
+
+BetterDiscord can be downloaded from [the official website](https://betterdiscord.app).
+
+For [Linux-based systems](/wiki/linux.md) the tool
+[betterdiscordctl](https://github.com/bb010g/betterdiscordctl) can be used.
+After installing it the following commands have to be run for the stable version of Discord to be
+converted to BetterDiscord.
+
+```sh
+betterdiscordctl install
+```
+
+Afterwards BetterDiscord can be kept up to date with the following command.
+
+```sh
+betterdiscordctl self-upgrade
+```
+
+### Pacman Hook
+
+When using [Arch Linux](/wiki/linux/arch-linux.md) and its package managers
+[Pacman and Yay](/wiki/linux/package_manager.md#arch-linux-pacman-and-yay) a hook can be set that
+automatically updates the discord installation to setup betterdiscord using betterdiscordctl.
+The following is a [pacman hook](/wiki/linux/package_manager.md#hooks) that can be used to update
+betterdiscord automatically.
+Make sure to change the three occurences of `<username>` to the name of the user to install
+betterdiscord for.
+
+```sh
+[Trigger]
+Type = Package
+Operation = Install
+Operation = Upgrade
+Target = discord*
+
+[Action]
+Description = Rebuild BetterDiscord after Discord update
+When = PostTransaction
+Exec = /usr/bin/sh -c 'sudo -u <username> betterdiscordctl reinstall >/dev/null 2>&1; sudo -u <username> xvfb-run -a discord --help >/dev/null 2>&1; sudo -u <username> betterdiscordctl install >/dev/null 2>&1; true'
+Depends = xorg-server-xvfb
+Depends = betterdiscordctl
+NeedsTargets
+```
+
+## Usage
+
+This section addresses the usage of BetterDiscord.
+
+### Recommended Themes
+
+The following themes are recommended by the author of this wiki.
+
+- `midnight` is a dark, customizable discord theme.
+- `system24` is a tui-like discord theme.
+
+### Recommended Plugins
+
+The following plugins are recommended by the author of this wiki.
+
+- `BetterChatNames` improves chat names by removing dashes in chat channels.
+- `BetterFriendList` adds extra controls to the friend page.
+- `BetterVolume` allows to set user volume manually and higher than 200%.
+- `ChatCounter` adds a character counter to most inputs.
+- `DoNotTrack` stops Discord from tracking many things.
+- `GameActivityToggle` adds a quick-toggle game activity button.
+- `HideDisabledEmojis` hides disabled emojis form the emoji picker.
+- `ImageUtilities` adds several utilities for images/videos.
+- `InterTimestamps` allows you to insert timestamp markdown.
+- `InvisibleTyping` is an enhanced version of silent typing.
+- `MoreRoleColors` adds role colors to usernames.
+- `OnlineFriendCount` adds the old online friend count.
+- `PermissionViewer` allows to view a users permissions.
+- `PinDMs` allows to pin DMs.
+- `QuickMention` adds a mention button to the message 3-dot menu.
+- `ServerDetails` shows server details in the server list tooltip.
+- `SplitLargeMessages` allows you to enter larger messages, which will automatically split into
+  several smaller messages.
+- `StaffTag` adds a crown to server owners (or admins/management).
+- `Uncompressed Images` will improve image quality of previews.

wiki/bittorrent.md

@@ -28,5 +28,5 @@ This is not a legal advice.
 Take your local laws into account when downloading torrents.
 Some torrents can be copyright infringing and therefor illegal to download.
 Only download legal and safe torrents like the
-[Arch Linux ISO](/wiki/linux/arch-linux.md#iso-medium).
+[Arch Linux ISO](/wiki/linux/arch-linux.md#create-installation-medium).
 Seeding it can help the community.

wiki/calibre.md

@@ -1,11 +1,13 @@
-# Calibre
+# calibre
 
-[Calibre](https://calibre-ebook.com/) is a cross-platform, free and open-source
+[calibre](https://calibre-ebook.com/) is a cross-platform, free and open-source
-software suite for [e-book](/wiki/e-books.md) management.
+software suite for [e-book](/wiki/e-book.md) management.
 It supports various formats aswell as conversion between them.
 
 ## Usage
 
+This section addresses various features of calibre.
+
 ## Adding a Plugin
 
 A plugin by a third party can be added by selecting a `.zip` archive - usually
@@ -59,3 +61,59 @@ This entry is based on two posts on mobileread - one regarding the
 [sort author name](https://www.mobileread.com/forums/showthread.php?t=314663)
 and the other regarding the
 [sort title](https://www.mobileread.com/forums/showthread.php?t=249870).
+
+## Changing the Cover of a Book
+
+Changing covers of a book can be done by editing the metadata available via the right-click menu.
+However this is not enough in some cases.
+`.pdf` in contrast to `.epub` files won't save the cover just by this action.
+After changing the cover in the metadata screen `.pdf` files have to be converted to correctly
+display the cover since the first page of such a file is generally considered the cover.
+An alternative to this is the `PDF Cover` Plugin which allows the insertion of the cover before all
+other pages without an extra conversion.
+Please note that it prepends the cover and does not delete any pages.
+
+## Transfer Books to a Device
+
+To transfer books to a device connect a e-reader to the computer.
+After a while calibre should recognize the device which will be apparent by the appearance of
+additional buttons on the top menu like the `Send to device`- and the `Device`-Button.
+First make sure only the formats you want will be transfered.
+This can be done by selecting `Device`, `File formats` and checking the formats as needed.
+Afterwards select the books and press `Send to device` to start the process of transfering the
+devices.
+Alternatively only specific formats of the books can be send to the device by selecting
+`Send specific format to` and `Main memory` under the `Send to device` menu.
+If there are books that contain series metadata make sure to disconnect the e-reader once and
+reconnect it.
+Afterwards select `Update cached metadata on device` under `Device` to update the metadata
+including the series.
+Finally disconnect the device.
+
+## KEPUB Format
+
+The `.kepub` format is a format that is similar to a normal epub but has some performance
+improvements for Kobo devices.
+It is recommended to convert `.mobi` and `.epub` files to a `.kepub` file before
+[transfering it to a Kobo device](#transfer-books-to-a-device).
+For this the Plugin `KePub Output` by Joel Goguen [can be added](#adding-a-plugin) can be
+installed.
+Afterwards books can be converted the normal way, but now the output format `.kepub` is available.
+Additionally the `Kobo Touch Extended` plugin is recommended to use since it makes sending books to
+Kobo e-readers easier.
+Finally `KePub Metadata Reader` and `KePub Metadata Reader` make it possible to read and write
+metadata to `.kepub` files which is especially useful.
+
+## Exporting and Importing Settings and Libraries
+
+This section explains how to export and import the settings of one calibre instance to another.
+It is based on a
+[reddit comment by dwhitzzz](https://www.reddit.com/r/Calibre/comments/1313kix/comment/mo4b9rn).
+
+To export the settings and libraries of a calibre instance open the corresponding instance and then
+right-click the `calibre` Button on the top menu.
+Select `Export/import all calibre data`, select the export or import option and then follow the
+instructions.
+Please note that the export only works when an empty folder is selected.
+All calibre data will then be exported into the selected directory.
+For the import process the folder that includes the calibre data has to be selected.

wiki/communication.md

@@ -4,12 +4,14 @@ Computer communication can have multiple different forms.
 There are voice and video calls aswell as text based messaging.
 This article bundles all of them.
 
-## VoIP
+## Social Platforms, Messengers and VoIP Services
 
-This section lists some of the most common Voice over IP (VoIP) platforms.
+This section lists some of the most common Voice over IP (VoIP) services, messengers and other
+social platforms.
 
-- [Matrix](/wiki/matrix.md) is a decentralized and open-source social platform.
 - [Discord](/wiki/discord.md) is a widely used, proprietary social platform.
+- [Matrix](/wiki/matrix.md) is a decentralized and open-source social platform.
+- [Signal](/wiki/signal.md) is an open-source, encrypted messaging service.
 
 ### Soundboards
 

wiki/cups.md

@@ -43,3 +43,50 @@ This is done by appending it the the mentioned connection string and will look l
 `usb://Brother/QL-600?serial=000J1Z140282`.
 The examples using the Brother printer are taken from a
 [dwaves article](https://dwaves.de/2022/07/13/gnu-linux-debian-11-how-to-setup-brother-ql-600-labelprinter/).
+
+### Custom Formats For Brother Printers 
+
+This section is based on an entry in the
+[german FAQ on the brother website](https://support.brother.com/g/b/faqend.aspx?c=de&lang=de&prod=lpql1110nwbeuk&faqid=faqp00100409_000).
+
+Especially when using continuos-length Brother label printers it can be useful to set up custom
+formats.
+After setting up the CUPS install the package that provides
+`brpapertoollpr_<printer name in cups>` which differs from printer to printer.
+For example when using a Brother QL-600 this command is named `brpapertoollpr_ql600` and on some
+[Linux](/wiki/linux.md) distributions like [Arch Linux](/wiki/linux/arch-linux.md) is provided in a
+package called `brother-ql600`.
+
+To then set up a new custom format run the following command.
+
+```sh 
+brpapertoollpr_<printer name in command> -P <printer name in cups> -n <format name> -w <width> -h <height>
+```
+
+`<printer name in command>` is the part of the command that corresponds to the printer as described
+in the previous sentence.
+`<printer name in cups>` and `<format name>` are the name of the printer already set up and given in
+CUPS and the name chosen for the new format.
+And `<width>` and `<height>` are width and height of the new format both given in millimeters.
+A complete command could look something like the following. 
+
+
+```sh 
+brpapertoollpr_ql600 -P Brother_QL-600 -n "62mmx12mm" -w 62 -h 12
+```
+
+The command to delete a custom format is the following.
+It uses the same variables and names as the command above.
+
+```sh 
+brpapertoollpr_ql600 -P <printer name> -d <format name>
+```
+
+The usage of this command could look similar to the following example.
+
+```sh 
+brpapertoollpr_ql600 -P Brother_QL-600 -d "62mmx12mm"
+```
+
+After setting up the new format it can be selected in the CUPS interface and used with the Brother
+printer it was set up for.

wiki/database.md

@@ -1,6 +1,6 @@
-# Databases
+# Database
 
-Databases are data collections of a computer system.
+A database is a data collections of a computer system.
 Most prominent type of database are SQL databases.
 
 ## Database management systems (DBMS)

wiki/discord.md

@@ -12,3 +12,17 @@ This section addresses various features of Discord.
 By default Discord performs an automatic check to see if it is up to date.
 On [Linux](/wiki/linux.md)-based systems it can be disabled by adding `"SKIP_HOST_UPDATE": true` to
 the `~/.config/discord/settings.json` file.
+
+### Setting Up a Music Bot
+
+For Discord there are various bots capable of playing music.
+The following is a list of bots featured in this wiki that can do this.
+
+- [Sinusbot](/wiki/sinusbot.md) is a self-hosted bot for Discord that can play music and sounds. 
+  It's closed-source and free of charge.
+  It also features [Teamspeak](/wiki/teamspeak.md) support.
+
+### Themes and Plugins
+
+By default Discord has no option to use themes or plugins.
+This however can be changed by using [BetterDiscord](/wiki/betterdiscord.md).

wiki/docker/actualbudget_-actual-server.md

@@ -0,0 +1,67 @@
+# actualbudget - actual-server
+
+This is a [Docker](/wiki/docker.md) container for an actualbudget server.
+The official container and documentation was made by
+[actualbudget](https://actualbudget.org/docs/install/docker/).
+This docker-rebuild is made up by a `docker-compose.yml` file.
+
+## Set-up
+
+Create the files `rebuild.sh`, `docker-compose.yml` at the same
+place.
+Change the settings according to your needs and run `./rebuild.sh` afterwards.
+
+### Ports
+
+Set the following ports in the `ports:` section.
+
+| Container Port | Recommended outside port | Protocol  | Description   |
+| -------------- | ------------------------ | --------- | ------------- |
+| `5006`         | `5006`                   | TCP       | WebUI         |
+
+### Volumes
+
+Set the following volumes with the -v tag.
+
+| Outside mount/volume name | Container mount | Description        |
+| ------------------------- | --------------- | ------------------ |
+| `actual`                  | `/data`         | Actual Budget data |
+
+### rebuild.sh
+
+```sh
+#!/bin/sh
+docker-compose down
+docker-compose up -d
+```
+
+### docker-compose.yml
+
+```yml
+version: '3'
+services:
+  actual_server:
+    image: docker.io/actualbudget/actual-server:latest
+    ports:
+      # This line makes Actual available at port 5006 of the device you run the server on,
+      # i.e. http://localhost:5006. You can change the first number to change the port, if you want.
+      - '5006:5006'
+    # environment:
+      # Uncomment any of the lines below to set configuration options.
+      # - ACTUAL_HTTPS_KEY=/data/selfhost.key
+      # - ACTUAL_HTTPS_CERT=/data/selfhost.crt
+      # - ACTUAL_PORT=5006
+      # - ACTUAL_UPLOAD_FILE_SYNC_SIZE_LIMIT_MB=20
+      # - ACTUAL_UPLOAD_SYNC_ENCRYPTED_FILE_SYNC_SIZE_LIMIT_MB=50
+      # - ACTUAL_UPLOAD_FILE_SIZE_LIMIT_MB=20
+      # See all options and more details at https://actualbudget.github.io/docs/Installing/Configuration
+      # !! If you are not using any of these options, remove the 'environment:' tag entirely.
+    volumes:
+      # Change './actual-data' below to the path to the folder you want Actual to store its data in on your server.
+      # '/data' is the path Actual will look for its files in by default, so leave that as-is.
+      - actual:/data
+    restart: unless-stopped
+
+volumes:
+   actual:
+```

wiki/docker/alexjustesen_-_speedtest-tracker.md

@@ -0,0 +1,67 @@
+# alexjustesen - speedtest-tracker
+
+This is a [Docker](/wiki/docker.md) container for a selfhosted internet speed
+tracker.
+The official container and documentation was made by
+[alexjustesen](https://github.com/alexjustesen/speedtest-tracker).
+
+## Set-up
+
+Create the file `rebuild.sh`.
+Change the settings according to your needs and run `./rebuild.sh` afterwards.
+It is important to set a correct app key as described in
+[the following section](#environment-variables).
+
+### Environment-variables
+
+Set the following variables with the -e tag.
+
+| Name                 | Usage                                                                                              | Default         |
+| -------------------- | -------------------------------------------------------------------------------------------------- | --------------- |
+| `APP_KEY`            | This is used for encryption and can be generated by `echo -n 'base64:'; openssl rand -base64 32;`  |                 |
+| `DB_CONNECTION`      | Database connection type                                                                           |                 |
+| `PGID`               | Group ID                                                                                           |                 |
+| `PUID`               | User ID                                                                                            |                 |
+| `APP_TIMEZONE`       | Timezone of the app                                                                                | `Europe/London` |
+| `DISPLAY_TIMEZONE`   | Timezone of the display                                                                            | `Europe/London` |
+| `SPEEDTEST_SCHEDULE` | Cron-formatted schedule for speedtest (`6 */6 * * *`: 6 minutes after every 6th hour)              |                 |
+
+### Volumes
+
+Set the following volumes with the -v tag.
+
+| Outside mount/volume name | Container mount | Description          |
+| ------------------------- | --------------- | -------------------- |
+| `speedtest_config`        | `/config`       | storage for config   |
+| `speedtest_keys`          | `/config/keys`  | storage for ssl keys |
+
+### Ports
+
+Set the following ports with the -p tag.
+
+| Container Port | Recommended outside port | Protocol | Description               |
+| -------------- | ------------------------ | -------- | ------------------------- |
+| `80`           | `8765`                   | TCP      | WebUI                     |
+| `443`          | ``                       | TCP      | SSL-encrypted WebUI       |
+
+### rebuild.sh
+
+```sh
+#!/bin/sh
+docker stop speedtest
+docker rm speedtest
+docker pull lscr.io/linuxserver/speedtest-tracker:latest
+docker run --name speedtest \
+    --restart unless-stopped \
+    -p 8765:80 \
+    -e PUID=1000 \
+    -e PGID=1000 \
+    -e APP_KEY="<generate>" \
+    -e DB_CONNECTION=sqlite \
+    -e SPEEDTEST_SCHEDULE="6 */6 * * *" \
+    -e APP_TIMEZONE="Europe/Berlin" \
+    -e DISPLAY_TIMEZONE="Europe/Berlin" \
+    -v speedtest_config:/config \
+    -v speedtest_keys:/config/keys \
+    -d lscr.io/linuxserver/speedtest-tracker:latest
+```

wiki/docker/alexta69_-_metube.md

@@ -11,7 +11,7 @@ This docker-rebuild is made up by a `docker-compose.yml` file.
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -19,7 +19,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | ------------------------- | --------------- | ------------------------------------ |
 | `downloads`               | `/downloads`    | folder to download data to           |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -27,7 +27,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ----------- |
 | `8881`         | `8081`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -36,7 +36,7 @@ docker pull vim alexta69/metube
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "3"

wiki/docker/awesometechnologies_-_synapse-admin.md

@@ -11,7 +11,7 @@ This docker-rebuild is made up by a `docker-compose.yml` file.
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -19,7 +19,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ----------- |
 | `80`           | `80`                     | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -28,7 +28,7 @@ docker pull awesometechnologies/synapse-admin:latest
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "2"

wiki/docker/axhilrex_-_podgrab.md

@@ -10,7 +10,7 @@ The official container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following variables with the -e tag.
 
@@ -18,7 +18,7 @@ Set the following variables with the -e tag.
 | ---------- | ----------------------------- | ------- |
 | `PASSWORD` | Password for `podgrab` user   |         |
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -27,7 +27,7 @@ Set the following volumes with the -v tag.
 | `podgrab_config`          | `/config`       | Configuration files     |
 | `media_podcasts`          | `/assets`       | location for podcasts   |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -35,7 +35,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `8080`         | `8080`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/b4bz_-_homer.md

@@ -11,7 +11,7 @@ Place the file `config.yml` in the `homer` docker volume and change it to your
 needs.
 After that rerun `./rebuild.sh` to make update your config.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -19,7 +19,7 @@ Set the following volumes with the -v tag.
 | ------------------------- | --------------- | ---------------------- |
 | `homer`                   | `/www/assets`   | storage for icons, etc |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -27,7 +27,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `8080`         | `8080`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -41,7 +41,7 @@ docker run --name homer \
     -d b4bz/homer:latest
 ```
 
-## config.yml
+### config.yml
 
 ```yml
 title: "tmp"

wiki/docker/bbilly1_-_tubearchivist.md

@@ -10,7 +10,7 @@ TubeArchivist specific version of Elasticsearch and one a [redis](/wiki/docker/r
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
@@ -36,7 +36,7 @@ The following table lists the environment variables for the image `bbilly1/tubea
 | `ELASTIC_PASSWORD` | Password for Elasticsearch                  | ``      |
 | `ES_JAVA_OPTS`     | Additional Java options                     | ``      |
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -53,7 +53,7 @@ The following table lists the environment variables for the image `bbilly1/tubea
 | ------------------------- | ------------------------------- | --------------------------- |
 | `es`                      | `/usr/share/elasticsearch/data` | storage for elasticsearch   |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -61,7 +61,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ----------- |
 | `8000`         | `8881`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -69,7 +69,7 @@ docker-compose down
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: '3.3'

wiki/docker/benbusby_-_whoogle-search.md

@@ -14,7 +14,7 @@ just created folder.
 You can find the `docker-compose.yml` in the cloned directory.
 Set the variables, volumes and ports according and run the `rebuild.sh`.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -22,7 +22,7 @@ Set the following volumes with the -v tag.
 | ------------------------- | ---------------- | ---------------- |
 | `searx_config`            | `/config`        | configurations   |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -30,7 +30,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `5000`         | `8000`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -40,7 +40,7 @@ docker-compose up -d
 cd ..
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "2.2"

wiki/docker/bilde2910_-_hauk.md

@@ -23,7 +23,7 @@ htpasswd -BC 10 /etc/hauk/users.htpasswd <other user name>
 
 Finally run `./rebuild.sh`.
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -31,7 +31,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | ------------------------- | ------------------ | ------------------------------ |
 | `./config/hauk`           | `/etc/hauk`        | config and password location   |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -39,7 +39,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ---------------------- |
 | `80`           | `80`                     | TCP      | Basic service          |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -48,7 +48,7 @@ docker pull bilde2910/hauk
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "2"

wiki/docker/chocobozzz_-_peertube.md

@@ -14,7 +14,7 @@ Create the files `rebuild.sh`, `.env` and `docker-compose.yml` at the same
 place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -22,7 +22,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ----------- |
 | `9000`         | `9000`                   | TCP      | WebUI       |
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -32,7 +32,7 @@ Set the following volumes with the -v tag.
 | `config`                  | `/config`                  | configuration data     |
 | `data`                    | `/data`                    | further data storage   |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -40,7 +40,7 @@ docker-compose down
 docker-compose up -d
 ```
 
-## .env
+### .env
 
 ```sh
 TZ="Europe/Berlin"
@@ -75,7 +75,7 @@ PEERTUBE_SMTP_TLS=false
 PEERTUBE_SMTP_DISABLE_STARTTLS=false
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "3.3"

wiki/docker/cloudrac3r_-_bibliogram.md

@@ -14,7 +14,7 @@ a folder within the just created folder.
 You can find the `docker-compose.yml` in the cloned directory.
 Set the variables, volumes and ports according and run the `rebuild.sh`.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -22,7 +22,7 @@ Set the following volumes with the -v tag.
 | ------------------------- | --------------- | ----------------------------------- |
 | `db`                      | `/app/db`       | storage for the bibliogram database |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -30,7 +30,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ----------- |
 | `10407`        | `10407`                  | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -40,7 +40,7 @@ docker-compose up -d
 cd ..
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "3"

wiki/docker/coturn_-_coturn.md

@@ -20,7 +20,7 @@ To get the local IP the command `ip route get 1` can be used.
 For the public IP the command `curl api.ipify.org` can be used.
 
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -30,7 +30,7 @@ Set the following ports in the `ports:` section.
 | `5349`         | `5349`                   | TCP/UDP  | TURN/STUN   |
 | `49152-65535`  | `49152-65535`            | UDP      | TURN/STUN   |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -39,7 +39,7 @@ docker pull coturn/coturn:latest
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "2"
@@ -55,7 +55,7 @@ services:
       - "5349:5349"
 ```
 
-## data/matrix/coturn/turnserver.conf
+### data/matrix/coturn/turnserver.conf
 
 ```txt
 use-auth-secret

wiki/docker/dperson_-_torproxy.md

@@ -8,7 +8,7 @@ The container and documentation was made by [dperson](https://hub.docker.com/r/d
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -17,7 +17,7 @@ Set the following volumes with the -v tag.
 | `tor_var`                 | `/var/lib/tor`  | Location for various files |
 | `tor_etc`                 | `/etc/tor`      | Various other config       |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -26,7 +26,7 @@ Set the following ports with the -p tag.
 | `8118`         | `8118`                   | HTTP     | privoxy web proxy    |
 | `9050`         | `9050`                   | SOCKS    | socks protocol proxy |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/dyonr_-_jackettvpn.md

@@ -15,7 +15,7 @@ Place the openvpn certificate in the `jacket_config` docker volume inside the
 `openvpn` folder.
 After that rerun `./rebuild.sh` to make update your config.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -24,7 +24,7 @@ Set the following volumes with the -v tag.
 | `jackett_config`          | `/config`       | storage for configs    |
 | `jackett_blackhole`       | `/blackhole`    | storage for magnets    |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -32,7 +32,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `9117`         | `9117`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 docker stop jackett

wiki/docker/dyonr_-_qbittorrentvpn.md

@@ -14,7 +14,7 @@ The default username of the web interface is `admin`.
 The default password is `adminadmin`.
 Both can be changed in the web interface after setup.
 
-## Environment-variables
+### Environment-variables
 
 Set the following variables with the -e tag.
 
@@ -25,7 +25,7 @@ Set the following variables with the -e tag.
 | `VPN_PASSWORD`      | Password for OpenVPN        | ` `     |
 | `LAN_NETWORK`       | Subnet of the local network | ` `     |
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -34,7 +34,7 @@ Set the following volumes with the -v tag.
 | `qbittorrentvpn_config`   | `/config`           | Configuration files     |
 | `qbittorrentvpn_data`     | `/downloads`        | Storage for data        |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -42,7 +42,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `9091`         | `8080`                   | TCP      | WebUI       |
 
-## Additional
+### Additional
 
 There are some special variables to set.
 
@@ -52,7 +52,7 @@ There are some special variables to set.
 | `--device`  | connect devices        |
 | `--sysctl`  | configure systemctl    |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/gitea_-_gitea.md

@@ -11,7 +11,7 @@ to it.
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
@@ -26,7 +26,7 @@ docker-compose file.
 | `DB_USER`   | Username for the database      |         |
 | `DB_PASSWD` | Password for the database      |         |
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -36,7 +36,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | `/etc/timezone`           | `/etc/timezone:ro` | link timezone                  |
 | `/etc/localtime`          | `/etc/localtime`   | link localtime                 |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -45,7 +45,7 @@ Set the following ports in the `ports:` section.
 | `3000`         | `3000`                   | TCP      | WebUI                  |
 | `22`           | `222`                    | TCP      | ssh port of git server |
 
-## Networks
+### Networks
 
 Set the following networks in the `networks:` section of the docker-compose file.
 
@@ -53,7 +53,7 @@ Set the following networks in the `networks:` section of the docker-compose file
 | ------- | --------------------- |
 | `gitea` | connect db with gitea |
 
-## Dependencies
+### Dependencies
 
 Set the following dependencies in the `depends_on:` section of the
 docker-compose file.
@@ -62,7 +62,7 @@ docker-compose file.
 | ---- | -------------------- |
 | `db` | Ensure db is running |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -70,7 +70,7 @@ docker-compose down
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "2"

wiki/docker/gramps-project_-_grampsweb.md

@@ -10,7 +10,7 @@ subcontainers - and one a [redis instance](/wiki/docker/redis.md).
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
@@ -22,7 +22,7 @@ docker-compose file.
 | `GRAMPSWEB_CELERY_CONFIG__result_backend` | Redis backend URL                    | ``      |
 | `GRAMPSWEB_RATELIMIT_STORAGE_URI`         | Storage URI                          | ``      |
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -37,7 +37,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | `gramps_media`            | `/app/media`             | storage for media           |
 | `gramps_tmp`              | `/tmp`                   | storage for temporary files |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -45,7 +45,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ----------- |
 | `5000`         | `80`                     | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -55,7 +55,7 @@ docker pull redis:alpine
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "3"

wiki/docker/grimsi_-_gameyfin.md

@@ -1,6 +1,6 @@
 # grimsi - gameyfin
 
-This is a [Docker](/wiki/docker.md) container for a [Gameyfin](/wiki/games/gameyfin.md).
+This is a [Docker](/wiki/docker.md) container for a [Gameyfin](/wiki/game/gameyfin.md).
 
 ## Set-up
 
@@ -11,7 +11,7 @@ gameyfin_config`.
 Make sure to run the following command on the config volume `chown -R 1000:root gameyfin_config`.
 Afterwards run `./rebuild.sh`.
 
-## Environment-variables
+### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
@@ -23,7 +23,7 @@ docker-compose file.
 | `GAMEYFIN_IGDB_API_CLIENT_ID`     | id of twitch internet game database     |         |
 | `GAMEYFIN_IGDB_API_CLIENT_SECRET` | secret of twitch internet game database |         |
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -31,7 +31,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | ------------------------- | ----------------------- | ------------------------------ |
 | `media_games`             | `/opt/gameyfin-library` | storage for games and configs  |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -40,7 +40,7 @@ Set the following ports in the `ports:` section.
 | `8080`         | `8093`                   | TCP      | WebUI                  |
 
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -48,7 +48,7 @@ docker-compose down
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "3"

wiki/docker/haugene_-_transmission-openvpn.md

@@ -13,7 +13,7 @@ To see which providers are supported take a look at the
 [official documentation](https://haugene.github.io/docker-transmission-openvpn/supported-providers/).
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following variables with the -e tag.
 
@@ -26,7 +26,7 @@ Set the following variables with the -e tag.
 | `CREATE_TUN_DEVICE` | Use a tunnel device         | ` `     |
 | `WEBPROXY_ENABLES`  | Use a webproxy              | ` `     |
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -36,7 +36,7 @@ Set the following volumes with the -v tag.
 | `transmission data`       | `/data`         | Storage for data        |
 | `/etc/localtime`          | `/etc/localtime:ro` | Link to the systemtime  |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -44,7 +44,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `9091`         | `9091`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/henrywhitaker3_-_speedtest-tracker.md

@@ -10,7 +10,7 @@ The official container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following variables with the -e tag.
 
@@ -19,7 +19,7 @@ Set the following variables with the -e tag.
 | `OOKLA_EULA_GDPR` | set to `true` to accept EULA  |         |
 | `AUTH`            | set to `true` to enable login |         |
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -27,7 +27,7 @@ Set the following volumes with the -v tag.
 | ------------------------- | --------------- | ------------------ |
 | `speedtest`               | `/config`       | storage for config |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -35,7 +35,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `80`           | `8765`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/homeassistant_-_home-assistant.md

@@ -10,7 +10,7 @@ The official container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -18,7 +18,7 @@ Set the following volumes with the -v tag.
 | ------------------------- | --------------- | ------------------------------- |
 | `homeassistant_data`      | `/config`       | configuration for devices, etc  |
 
-## Environment-variables
+### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
@@ -27,12 +27,12 @@ docker-compose file.
 | --------------------- | --------------------------- | ----------------------- |
 | `TZ`                  | specify the timezone        | ``                      |
 
-## Additional
+### Additional
 
 The container needs acces to the host network.
 This will at the same time expose port 8123 as web interface.
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 docker run --name homeassistant \

wiki/docker/immich-app_-_immich-server.md

@@ -0,0 +1,75 @@
+# immich-app - immich-server
+
+This is a [Docker](/wiki/docker.md) container for a [immich](/wiki/immich.md) server.
+The official container and documentation was made by
+[immich](https://github.com/immich-app/immich).
+This docker-rebuild is made up by a `docker-compose.yml` file.
+In addition to the main container you need to connect a
+[redis](/wiki/docker/redis.md) and a [postgres](/wiki/docker/postgres.md) container to it.
+
+## Set-up
+
+Create the files `rebuild.sh`, `.env` and `docker-compose.yml` at the same
+place.
+Please note that the `docker-compose.yml` file should be retrieved from the
+[Github releases page](https://github.com/immich-app/immich/releases/)
+Change the settings according to your needs and run `./rebuild.sh` afterwards.
+
+### Environment-variables
+
+The environment variables are set via the `.env` file and listed in the
+[corresponding section](#env).
+
+### Ports
+
+Set the following ports in the `ports:` section.
+
+| Container Port | Recommended outside port | Protocol  | Description   |
+| -------------- | ------------------------ | --------- | ------------- |
+| `2283`         | `3001`                   | TCP       | WebUI         |
+
+### Volumes
+
+Set the following volumes with the -v tag.
+
+| Outside mount/volume name | Container mount       | Description   |
+| ------------------------- | --------------------- | ------------- |
+| `immich_library`          | `/usr/src/app/upload` | Library       |
+| `/etc/timezone`           | `/etc/timezone:ro`    | Timezone      |
+
+### rebuild.sh
+
+```sh #!/bin/sh
+docker-compose down
+docker-compose up -d
+```
+
+### .env
+
+```sh
+# You can find documentation for all the supported env variables at https://immich.app/docs/install/environment-variables
+
+# The location where your uploaded files are stored
+UPLOAD_LOCATION=immich_library
+# The location where your database files are stored
+DB_DATA_LOCATION=immich_postgres
+
+# To set a timezone, uncomment the next line and change Etc/UTC to a TZ identifier from this list: https://en.wikipedia.org/wiki/List_of_tz_database_time_zones#List
+# TZ=Etc/UTC
+
+# The Immich version to use. You can pin this to a specific version like "v1.71.0"
+IMMICH_VERSION=release
+
+# Connection secret for postgres. You should change it to a random password
+# Please use only the characters `A-Za-z0-9`, without special characters or spaces
+DB_PASSWORD=postgres
+
+# Disable Machine Learning
+IMMICH_MACHINE_LEARNING_ENABLED=false
+IMMICH_MACHINE_LEARNING_URL=false
+
+# The values below this line do not need to be changed
+###################################################################################
+DB_USERNAME=postgres
+DB_DATABASE_NAME=immich
+```

wiki/docker/itzg_-_minecraft-server.md

@@ -1,7 +1,7 @@
 # itzg - minecraft-server
 
 This is a [Docker](/wiki/docker.md) container for a
-[Minecraft](../games/minecraft.md) server.
+[Minecraft](/wiki/game/minecraft.md) server.
 The container and documentation was made by
 [itzg](https://hub.docker.com/r/itzg/minecraft-server).
 
@@ -10,7 +10,7 @@ The container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following variables with the -e tag.
 
@@ -24,7 +24,7 @@ Set the following variables with the -e tag.
 | `ICON`        | Link the Icon of the Server                                    |                                              |
 | `MOTD`        | Set the Message of the day                                     | "A Paper Minecraft Server powered by Docker" |
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -32,7 +32,7 @@ Set the following volumes with the -v tag.
 | ------------------------- | --------------- | ------------------------------ |
 | `minecraft`               | `/data`         | location for all relevant data |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -40,7 +40,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | --------- | ------------------ |
 | `25565`        | `25565`                  | Minecraft | Port for Minecraft |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -60,3 +60,25 @@ docker run --name minecraft \
     -e MOTD="Message of the day" \
     -d itzg/minecraft-server
 ```
+
+## Usage
+
+This section addresses the usage of the minecraft-server container.
+
+### Installing Mods
+
+Mods can be installed as described in the
+[corresponding article of the official documentation](https://github.com/itzg/docker-minecraft-server/blob/master/docs/mods-and-plugins/index.md).
+For this set the server type by using the `-e TYPE=<type>` flag.
+`<type>` is the API that is used as the core library.
+Most notably this value could be `FABRIC` or `FORGE`.
+After this the mods (as `.jar` files) can be placed in the `mods` directory of the
+[Docker](/wiki/docker.md) volume.
+Afterwards run the [`rebuild.sh`](#rebuildsh) to restart the server with loaded mods.
+
+#### Installing Datapacks
+
+The installation of datapacks is done similar to the described process in the
+[corresponding section of the minecraft entry](/wiki/game/minecraft.md#installing-datapacks).
+The only difference is the path to place the `.zip` datapack files in which is `world/datapacks` in
+case of this [Docker](/wiki/docker.md) image.

wiki/docker/iv-org_-_invidious.md

@@ -17,7 +17,7 @@ just created folder.
 You can find the `docker-compose.yml` in the cloned directory.
 Set the variables, volumes and ports according and run the `rebuild.sh`.
 
-## Environment-variables
+### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
@@ -39,7 +39,7 @@ docker-compose file.
 | `popular_enabled`      | enable the popular section                                 | `true`  |
 | `registration_enabled` | enable registration for new users                          | `true`  |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -47,7 +47,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ----------- |
 | `3000`         | `3000`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -59,7 +59,7 @@ docker-compose up -d
 cd ..
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "3"

wiki/docker/jkarlos_-_git-server-docker.md

@@ -1,6 +1,6 @@
 # jkarlos - git-server-docker
 
-This is a [Docker](/wiki/docker.md) container for a [git](../git.md) server.
+This is a [Docker](/wiki/docker.md) container for a [git](/wiki/git_%28general%29.md) server.
 The official container and documentation was made by
 [jkarlos](https://hub.docker.com/r/jkarlos/git-server-docker).
 
@@ -9,7 +9,7 @@ The official container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -18,7 +18,7 @@ Set the following volumes with the -v tag.
 | `git-server_repos`        | `/git-server/repos` | storage for git repos     |
 | `git-server_keys`         | `/git-server/keys`  | storage for user ssh keys |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -26,7 +26,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ------------------------------------- |
 | `22`           | `2222`                   | TCP      | ssh port for accessing the git server |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/johnktims_-_folding-at-home.md

@@ -10,7 +10,7 @@ The official container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -18,7 +18,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `7396`         | `7396`                   | TCP      | WebUI       |
 
-## Additional
+### Additional
 
 There are some special variables to set.
 
@@ -28,11 +28,7 @@ There are some special variables to set.
 | `--power` | set the default power to fold at home |
 | `--team`  | set your teamid to contribute points  |
 
-### GPU
+### rebuild.sh
-
-GPU support is documented in [the docker article](../docker.md).
-
-## rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -48,3 +44,9 @@ docker run --name folding-at-home \
     --power=full \
     --team=000000
 ```
+
+## Usage
+
+### GPU-Support
+
+GPU support is documented in [the docker article](../docker.md).

wiki/docker/jonohill_-_docker-openvpn-proxy.md

@@ -10,7 +10,7 @@ The official container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -18,7 +18,7 @@ Set the following volumes with the -v tag.
 | ------------------------- | --------------- | ------------------------ |
 | `ovpn-proxy`              | `/config`       | storage for openvpn data |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -26,7 +26,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ------------ |
 | `9050`         | `8080`                   | HTTP     | proxy port   |
 
-## Environment-Variables
+### Environment-Variables
 
 Set the following variables with the -e tag.
 
@@ -36,7 +36,7 @@ Set the following variables with the -e tag.
 | `OPENVPN_USERNAME`  | username for OpenVPN        | ` `     |
 | `OPENVPN_PASSWORD`  | password for OpenVPN        | ` `     |
 
-## Additional
+### Additional
 
 There are some special variables to set.
 
@@ -46,7 +46,7 @@ There are some special variables to set.
 | `--device`  | connect devices        |
 | `--sysctl`  | configure systemctl    |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/kylemanna_-_openvpn.md

@@ -22,21 +22,7 @@ docker run -v openvpn:/etc/openvpn --rm -it kylemanna/openvpn ovpn_initpki
 
 Afterwards run `./rebuild.sh`.
 
-## Usage
+### Volumes
-
-### Create Certificates
-
-Each device that connects to the [OpenVPN](/wiki/openvpn.md) server should
-have a certificate to connect by.
-Create a certificate and retrieve it by running the following commands.
-Change all occurences of `<CLIENTNAME>` to the name of the client.
-
-```sh
-docker run -v openvpn:/etc/openvpn --rm -it kylemanna/openvpn easyrsa build-client-full <CLIENTNAME> nopass
-docker run -v openvpn:/etc/openvpn --rm kylemanna/openvpn ovpn_getclient <CLIENTNAME> > <CLIENTNAME>.ovpn
-```
-
-## Volumes
 
 Set the following volumes with the -v tag.
 
@@ -44,7 +30,7 @@ Set the following volumes with the -v tag.
 | ------------------------- | --------------- | ------------------------ |
 | `ovpn`                    | `/etc/openvpn`  | storage for openvpn data |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -52,7 +38,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ------------ |
 | `1194`         | `1194`                   | UDP      | openvpn port |
 
-## Additional
+### Additional
 
 There are some special variables to set.
 
@@ -60,7 +46,7 @@ There are some special variables to set.
 | ----------- | ---------------------- |
 | `--cap-add` | add linux capabilities |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -74,3 +60,17 @@ docker run --name openvpn \
     -v ovpn:/etc/openvpn \
     -d kylemanna/openvpn
 ```
+
+## Usage
+
+### Create Certificates
+
+Each device that connects to the [OpenVPN](/wiki/openvpn.md) server should
+have a certificate to connect by.
+Create a certificate and retrieve it by running the following commands.
+Change all occurences of `<CLIENTNAME>` to the name of the client.
+
+```sh
+docker run -v openvpn:/etc/openvpn --rm -it kylemanna/openvpn easyrsa build-client-full <CLIENTNAME> nopass
+docker run -v openvpn:/etc/openvpn --rm kylemanna/openvpn ovpn_getclient <CLIENTNAME> > <CLIENTNAME>.ovpn
+```

wiki/docker/linuxserver_-_airsonic-advanced.md

@@ -10,7 +10,7 @@ The official container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following variables with the -e tag.
 
@@ -20,7 +20,7 @@ Set the following variables with the -e tag.
 | `PGID` | GroupID  |         |
 | `TZ`   | Timezone |         |
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -33,7 +33,7 @@ Set the following volumes with the -v tag.
 | `media_audiobooks`        | `/audiobooks`   | Location for audiobooks |
 | `media_podcasts`          | `/podcasts`     | location for podcasts   |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -41,7 +41,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `4040`         | `4040`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/linuxserver_-_airsonic.md

@@ -10,7 +10,7 @@ The official container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following variables with the -e tag.
 
@@ -20,7 +20,7 @@ Set the following variables with the -e tag.
 | `PGID` | GroupID  |         |
 | `TZ`   | Timezone |         |
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -33,7 +33,7 @@ Set the following volumes with the -v tag.
 | `media_audiobooks`        | `/audiobooks`   | Location for audiobooks |
 | `media_podcasts`          | `/podcasts`     | location for podcasts   |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -41,7 +41,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `4040`         | `4040`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/linuxserver_-_freshrss.md

@@ -11,7 +11,7 @@ This docker-rebuild is made up by a `docker-compose.yml` file.
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
@@ -22,7 +22,7 @@ docker-compose file.
 | `PGID` | Groupid to run the container |         |
 | `TZ`   | specify the timezone         |         |
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -30,7 +30,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | ------------------------- | --------------- | ------------------------------------ |
 | `config`                  | `/config`       | storage for config files of jellyfin |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -38,7 +38,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ----------- |
 | `7008`         | `80`                     | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -47,7 +47,7 @@ docker pull lscr.io/linuxserver/freshrss:latest
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "2.1"

wiki/docker/linuxserver_-_jellyfin.md

@@ -11,7 +11,7 @@ This docker-rebuild is made up by a `docker-compose.yml` file.
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
@@ -22,7 +22,7 @@ docker-compose file.
 | `PGID` | Groupid to run the container |         |
 | `TZ`   | specify the timezone         |         |
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -40,7 +40,7 @@ it is recommended to use them as external volumes (volumes section:
 To use the rebuild the volumes have to exist before creating the container
 (`docker volume create media_movies` and tvshows accordingly).
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -48,7 +48,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ----------- |
 | `8096`         | `8096`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -57,7 +57,7 @@ docker pull linuxserver/jellyfin:latest
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "2"

wiki/docker/linuxserver_-_lidarr.md

@@ -21,7 +21,7 @@ This namely causes the following line in the
       - /var/lib/docker/volumes/transmission_data/_data/completed:/data/completed #optional
 ```
 
-## Environment-variables
+### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
@@ -32,7 +32,7 @@ docker-compose file.
 | `PGID`                | group id for container user | `1000`                  |
 | `TZ`                  | specify the timezone        | `Etc/UTC`               |
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -41,7 +41,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | `config`                  | `/config`         | directory for config              |
 | `complete`                | `/music`          | directory for music               |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -49,7 +49,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ------------ |
 | `8686`         | `8686`                   | TCP      | webUI        |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -58,7 +58,7 @@ docker pull lscr.io/linuxserver/lidarr:latest
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "2.1"

wiki/docker/linuxserver_-_radarr.md

@@ -21,7 +21,7 @@ This namely causes the following line in the
       - /var/lib/docker/volumes/transmission_data/_data/completed:/data/completed #optional
 ```
 
-## Environment-variables
+### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
@@ -32,7 +32,7 @@ docker-compose file.
 | `PGID`                | group id for container user | `1000`                  |
 | `TZ`                  | specify the timezone        | `Etc/UTC`               |
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -41,7 +41,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | `config`                  | `/config`         | directory for config              |
 | `complete`                | `/movies`         | directory for music               |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -49,7 +49,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ------------ |
 | `7878`         | `7878`                   | TCP      | webUI        |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -58,7 +58,7 @@ docker pull lscr.io/linuxserver/radarr:latest
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "2.1"

wiki/docker/linuxserver_-_sonarr.md

@@ -21,7 +21,7 @@ This namely causes the following line in the
       - /var/lib/docker/volumes/transmission_data/_data/completed:/data/completed #optional
 ```
 
-## Environment-variables
+### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
@@ -32,7 +32,7 @@ docker-compose file.
 | `PGID`                | group id for container user | `1000`                  |
 | `TZ`                  | specify the timezone        | `Etc/UTC`               |
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -41,7 +41,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | `config`                  | `/config`         | directory for config              |
 | `complete`                | `/tv`             | directory for music               |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -49,7 +49,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ------------ |
 | `8989`         | `8989`                   | TCP      | webUI        |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -58,7 +58,7 @@ docker pull lscr.io/linuxserver/sonarr:latest
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "2.1"

wiki/docker/linuxserver_-_syncthing.md

@@ -10,7 +10,7 @@ The official container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following variables with the -e tag.
 
@@ -21,7 +21,7 @@ Set the following variables with the -e tag.
 | `TZ`        | Timezone         |         |
 | `UMASK_SET` | setting usermask |         |
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -29,7 +29,7 @@ Set the following volumes with the -v tag.
 | ------------------ | --------------- | ----------------------------------------------- |
 | `syncthing_config` | `/config`       | storage for config and possible downloaded data |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -39,7 +39,7 @@ Set the following ports with the -p tag.
 | `22000`        | `22000`                  | TCP      | Syncthing internal |
 | `21027`        | `21027`                  | UDP      | Syncthing internal |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/linuxserver_-_tvheadend.md

@@ -10,7 +10,7 @@ The official container and documentation was made by
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
@@ -22,7 +22,7 @@ docker-compose file.
 | `TZ`                  | specify the timezone        | `Europe/London`         |
 | `RUN_OPTS`          | specify the timezone          | ` `                     |
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -31,7 +31,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | `config`                  | `/config`       | directory for config              |
 | `tvdvr`                   | `/recordings`   | directory for storage             |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -49,7 +49,7 @@ docker pull lscr.io/linuxserver/tvheadend:latest
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "2.1"

wiki/docker/mailserver_-_docker-mailserver.md

@@ -38,7 +38,7 @@ Finally if a reverse proxy is used check the
 
 Afterwards you're ready to go by once again running the `rebuild.sh` file.
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/mariadb.md

@@ -5,7 +5,15 @@ The official container and documentation was made by [mariadb](https://hub.docke
 The Docker container is mainly used in combination with other containers.
 To achieve this in the easiest way use a docker-compose file.
 
-## Environment-variables
+## Set-Up
+
+The mariadb Docker container is dependent on another container most of the time. 
+The exact setup will be described in the regarding entry.
+Nevertheless both environment variables and volumes are listed in the sections below.
+Nevertheless both environment variables and volumes and networks are listed in the sections below.
+These are needed most often.
+
+### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
@@ -17,10 +25,15 @@ docker-compose file.
 | `MYSQL_PASSWORD`      | set the mysql user password   |         |
 | `MYSQL_Database`      | specify mysql database to use |         |
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
 | Outside mount/volume name | Container mount  | Description               |
 | ------------------------- | ---------------- | ------------------------- |
 | `mysql`                   | `/var/lib/mysql` | storage for owncloud data |
+
+### Networks
+
+You can set networks in the `networks:` part of a docker-compose file to connect
+the database with other docker containers.

wiki/docker/massivedecks_-_client.md

@@ -1,6 +1,6 @@
 # massivedecks - client
 
-This is a [Docker](/wiki/docker.md) container for a [Massive Deecks](/wiki/games/massive_decks.md)
+This is a [Docker](/wiki/docker.md) container for a [Massive Deecks](/wiki/game/massive_decks.md)
 client.
 Due to ease of use this entry will also feature the server container.
 The official container and documentation was made by
@@ -16,7 +16,7 @@ place.
 Make sure to set `POSTGRES_PASSWORD`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -24,7 +24,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ----------- |
 | `8080`         | `8080`                   | TCP      | WebUI       |
 
-## Environment-variables
+### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
@@ -33,7 +33,7 @@ docker-compose file.
 | ----------- | ----------------------- | ----------------- |
 | `NODE_ENV`  | Setting the environment | `production`      |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -44,7 +44,7 @@ docker pull ghcr.io/lattyware/massivedecks/client:latest-release
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "3.3"

wiki/docker/matrixdotorg_-_synapse.md

@@ -11,7 +11,7 @@ This docker-rebuild is made up by a `docker-compose.yml` file.
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
@@ -24,7 +24,7 @@ docker-compose file.
 | `GID`                 | group id for synapse user | `1000`                  |
 | `TZ`                  | specify the timezone      | `Europe/London`         |
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -32,7 +32,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | ------------------------- | --------------- | --------------------------------- |
 | `synapse`                 | `/data`         | directory for storage and configs |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -40,7 +40,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ---------------------- |
 | `8008`         | `443`                    | TCP      | matrix homeserver port |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -49,7 +49,7 @@ docker pull matrixdotorg/synapse:latest
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 services:

wiki/docker/mikenye_-_picard.md

@@ -11,7 +11,7 @@ The official container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following variables with the -e tag.
 
@@ -22,7 +22,7 @@ Set the following variables with the -e tag.
 | `DISPLAY_WIDTH`  | Width of software   | `1280`  |
 | `DISPLAY_HEIGHT` | Height of software  | `768`   |
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -31,7 +31,7 @@ Set the following volumes with the -v tag.
 | `config`                  | `/config`       | Configuration files       |
 | `media_music`             | `/storage`      | Location for audio files  |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -41,7 +41,7 @@ Set the following ports with the -p tag.
 | `5900`         | `5900`                   | TCP      | VNC                        |
 | `8000`         | `8000`                   | TCP      | Picard browser integration |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/mysql.md

@@ -6,7 +6,14 @@ The official container and documentation was made by
 The Docker container is mainly used in combination with other containers.
 To achieve this in the easiest way use a docker-compose file
 
-## Environment-variables
+## Set-Up
+
+The mysql Docker container is dependent on another container most of the time. 
+The exact setup will be described in the regarding entry.
+Nevertheless both environment variables and volumes and networks are listed in the sections below.
+These are needed most often.
+
+### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
@@ -18,7 +25,7 @@ docker-compose file.
 | `MYSQL_PASSWORD`      | set the mysql user password   |         |
 | `MYSQL_Database`      | specify mysql database to use |         |
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -26,7 +33,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | ------------------------- | ---------------- | ------------------------- |
 | `mysql`                   | `/var/lib/mysql` | storage for owncloud data |
 
-## Networks
+### Networks
 
 You can set networks in the `networks:` part of a docker-compose file to connect
 the database with other docker containers.

wiki/docker/nextcloud.md

@@ -23,7 +23,7 @@ mariadb:9
 Make sure to substitute all the occurences of the `:latest` tag accordingly.
 Updating has to be done manually so nothing breaks.
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -31,7 +31,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | ------------------------- | --------------- | ---------------------------------------- |
 | `nextcloud`               | `/var/www/html` | storage for nextcloud plugins and config |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -39,7 +39,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ----------- |
 | `80`           | `80`                     | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -49,7 +49,7 @@ docker pull mariadb:latest
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: '2'

wiki/docker/nginx.md

@@ -11,7 +11,7 @@ This docker-rebuild is made up by a `docker-compose.yml` file.
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -19,7 +19,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | ------------------------- | -------------------- | --------------------------- |
 | `nginx`                   | `/etc/nginx/conf.d/` | directory for nginx configs |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -28,7 +28,7 @@ Set the following ports in the `ports:` section.
 | `80`           | `80`                     | TCP      | http port   |
 | `443`          | `443`                    | TCP      | https port  |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -37,7 +37,7 @@ docker pull nginx:latest
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "2"

wiki/docker/olbat_-_cupsd.md

@@ -9,7 +9,7 @@ The official container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -18,7 +18,7 @@ Set the following volumes with the -v tag.
 | `cups`                    | `/etc/cups`     | configuration for printers, etc |
 | `/var/run/dbus`           | `/var/run/dbus` | connection to host dbus         |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -26,11 +26,11 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------------- |
 | `631`          | `631`                    | TCP      | cups server webui |
 
-## Additional
+### Additional
 
 The default username is `print`, the default password is `print`.
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/ollama_-_ollama.md

@@ -0,0 +1,40 @@
+# ollama - ollama
+
+This is a [Docker](/wiki/docker.md) container for an ollama server.
+The official container and documentation was made by
+[ollama](https://hub.docker.com/r/ollama/ollama).
+
+## Set-up
+
+Create the file `rebuild.sh`.
+Change the settings according to your needs and run `./rebuild.sh` afterwards.
+
+## Ports
+
+Set the following ports in the `ports:` section.
+
+| Container Port | Recommended outside port | Protocol  | Description         |
+| -------------- | ------------------------ | --------- | ------------------- |
+| `11434`        | `11434`                  | TCP       | Communications port |
+
+## Volumes
+
+Set the following volumes with the -v tag.
+
+| Outside mount/volume name | Container mount | Description   |
+| ------------------------- | --------------- | ------------- |
+| `ollama`                  | `/root/.ollama` | Ollama data |
+
+## rebuild.sh
+
+```sh
+#!/bin/sh
+docker stop ollama
+docker rm ollama
+docker pull ollama/ollama
+docker run --name ollama \
+    --restart unless-stopped \
+    -p 11434:11434 \
+    -v ollama:/root/.ollama \
+    -d ollama/ollama
+```

wiki/docker/open-webui_-_open-webui.md

@@ -0,0 +1,41 @@
+# open-webui - open-webui
+
+This is a [Docker](/wiki/docker.md) container for a Open WebUI server.
+The official container and documentation was made by
+[open-webui](https://github.com/open-webui/open-webui).
+
+## Set-up
+
+Create the file `rebuild.sh`.
+Change the settings according to your needs and run `./rebuild.sh` afterwards.
+
+## Ports
+
+Set the following ports in the `ports:` section.
+
+| Container Port | Recommended outside port | Protocol  | Description   |
+| -------------- | ------------------------ | --------- | ------------- |
+| `11434`        | `8080`                   | TCP       | WebUI         |
+
+## Volumes
+
+Set the following volumes with the -v tag.
+
+| Outside mount/volume name | Container mount     | Description     |
+| ------------------------- | ------------------- | --------------- |
+| `open-webui`              | `/app/backend/data` | Open WebUI data |
+
+## rebuild.sh
+
+```sh
+#!/bin/sh
+docker stop openwebui
+docker rm openwebui
+docker pull ghcr.io/open-webui/open-webui:main
+docker run --name openwebui \
+    --restart unless-stopped \
+    -p 11434:8080 \
+    -v open-webui:/app/backend/data \
+    -d ghcr.io/open-webui/open-webui:main
+
+```

wiki/docker/owncloud.md

@@ -13,7 +13,7 @@ Docker container.
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -22,7 +22,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | `owncloud`                | `/var/www/html`        | storage for owncloud plugins |
 | `config`                  | `/var/www/html/config` | storage for owncloud config  |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -30,7 +30,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ----------- |
 | `80`           | `80`                     | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -40,7 +40,7 @@ docker pull mariadb
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "3.1"

wiki/docker/oznu_-_docker-cloudflare-ddns.md

@@ -10,7 +10,7 @@ The official container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment variables
+### Environment variables
 
 Set the following variables with the -e tag.
 
@@ -20,7 +20,7 @@ Set the following variables with the -e tag.
 | `ZONE=`       | append your domain (for example `main.com`)            |
 | `SUBDOMAIN`   | append your subdomain (for example `dynamic`)          |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/oznu_-_onedrive.md

@@ -8,7 +8,7 @@ The official container and documentation was made by [oznu](https://hub.docker.c
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following variables with the -e tag.
 
@@ -17,7 +17,7 @@ Set the following variables with the -e tag.
 | `PUID` | UserID  |         |
 | `PGID` | GroupID |         |
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -26,7 +26,7 @@ Set the following volumes with the -v tag.
 | `onedrive_config`         | `/config`       | configuration storage for the server connection |
 | `onedrive_doc`            | `/documents`    | storage for downloaded documents                |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/portainer_-_agent.md

@@ -10,7 +10,7 @@ The official container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -19,7 +19,7 @@ Set the following volumes with the -v tag.
 | `/var/run/docker.sock`    | `/var/run/docker.sock`    | connect your running docker containers |
 | `/var/lib/docker/volumes` | `/var/lib/docker/volumes` | connect running docker volumes         |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -27,7 +27,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | -------------------- |
 | `9001`         | `9001`                   | TCP      | Portainer agent port |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/portainer_-_portainer.md

@@ -10,7 +10,7 @@ The official container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -19,7 +19,7 @@ Set the following volumes with the -v tag.
 | `portainer`               | `/data`                | configuration directory                           |
 | `/var/run/docker.sock`    | `/var/run/docker.sock` | connection to local docker containers and volumes |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -27,7 +27,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `9000`         | `9000`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/postgres.md

@@ -1,4 +1,4 @@
-# Postgres
+# postgres
 
 This is a [Docker](/wiki/docker.md) container for a postgresql database.
 The official container and documentation was made by
@@ -6,7 +6,15 @@ The official container and documentation was made by
 The Docker container is mainly used in combination with other containers.
 To achieve this in the easiest way use a docker-compose file
 
-## Environment-variables
+## Set-Up
+
+The postgres Docker container is dependent on another container most of the time. 
+The exact setup will be described in the regarding entry.
+Nevertheless both environment variables and volumes are listed in the sections below.
+Nevertheless both environment variables and volumes and networks are listed in the sections below.
+These are needed most often.
+
+### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
@@ -18,7 +26,7 @@ docker-compose file.
 | `POSTGRES_PASSWORD`      | set the postgres user password   |         |
 | `POSTGRES_DB`            | specify postgres database to use |         |
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -27,7 +35,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | `postgres`                | `/var/lib/postgresql/data` | storage for owncloud data    |
 | `postgres_config`         | `/config/sql`              | initial sql setup and config |
 
-## Networks
+### Networks
 
 You can set networks in the `networks:` part of a docker-compose file to connect
 the database with other docker containers.

wiki/docker/prologic_-_golinks.md

@@ -10,7 +10,7 @@ The official container and documentation was made by
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -18,7 +18,7 @@ Set the following volumes with the -v tag.
 | ------------------------- | --------------- | -------------------------- |
 | `golinks`                 | `/search.db`    | database with all commands |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -26,7 +26,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `8000`         | `8000`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -35,7 +35,7 @@ docker pull prologic/golinks:latest
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "3.1"

wiki/docker/prologic_-_gopherproxy.md

@@ -9,7 +9,7 @@ The official container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -17,7 +17,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ---------------------------------------- |
 | `8000`         | `8000`                   | TCP      | port to proxy the gopher site as http to |
 
-## Additional
+### Additional
 
 There are some special variables to set.
 
@@ -25,7 +25,7 @@ There are some special variables to set.
 | ------ | ------------------------------------------------------------- |
 | `-uri` | define the gopher site to proxy (just 'domain.tld' is enough) |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/prologic_-_todo.md

@@ -9,7 +9,7 @@ The official container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -17,7 +17,7 @@ Set the following volumes with the -v tag.
 | ------------------------- | ---------------------- | ---------------------- |
 | `todo`                    | `/go/src/todo/todo.db` | Database for todo list |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -25,7 +25,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `8000`         | `8000`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/rblsb_-_synctube.md

@@ -15,7 +15,7 @@ Then build the image inside the git folder with `docker build -t synctube .`.
 Set the variables, volumes and ports according and run the `rebuild.sh`.
 
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -23,7 +23,7 @@ Set the following volumes with the -v tag.
 | ------------------------- | ------------------- | ------------------- |
 | `synctube`                | `/usr/src/app/user` | Configuration files |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -31,7 +31,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `4200`         | `4200`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/redis.md

@@ -6,10 +6,23 @@ The official container and documentation was made by
 The Docker container is mainly used in combination with other containers.
 To achieve this in the easiest way use a docker-compose file.
 
-## Volumes
+## Set-Up
+
+The redis Docker container is dependent on another container most of the time. 
+The exact setup will be described in the regarding entry.
+Nevertheless both volumes and networks are listed in the sections below.
+These are needed most often.
+
+### Volumes
+
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
 | Outside mount/volume name | Container mount | Description          |
 | ------------------------- | --------------- | -------------------- |
 | `redis`                   | `/data`         | storage for all data |
+
+### Networks
+
+You can set networks in the `networks:` part of a docker-compose file to connect
+the database with other docker containers.

wiki/docker/rlister_-_hastebin.md

@@ -9,7 +9,7 @@ The official container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following variables with the -e tag.
 
@@ -17,7 +17,7 @@ Set the following variables with the -e tag.
 | -------------- | ----------------------- | ------- |
 | `STORAGE_TYPE` | Type to store the datas | `file`  |
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -25,7 +25,7 @@ Set the following volumes with the -v tag.
 | ------------------------- | --------------- | -------------------------- |
 | `hastebin`                | `/app/data`     | storage directory for data |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -33,7 +33,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `7777`         | `7777`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/samba.md

@@ -10,7 +10,7 @@ The official container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -23,7 +23,7 @@ Set the following volumes with the -v tag.
 | `samba_etc`               | `/etc`             | etc directory of samba server |
 | `samba_log`               | `/var/log/samba`   | storage for samba logs        |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -32,7 +32,7 @@ Set the following ports with the -p tag.
 | `139`          | `139`                    | TCP      | Samba internal |
 | `445`          | `445`                    | TCP      | Samba internal |
 
-## Additional
+### Additional
 
 There are some special variables to set.
 
@@ -42,7 +42,7 @@ There are some special variables to set.
 | `-w \<workgroup\>`                                                        | define workgroup |
 | `-s \<name;path\>(;browse;readonly;guest;users;admins;writelist;comment)` | define shares    |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/searx_-_searx.md

@@ -10,7 +10,7 @@ The official container and documentation was made by
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -19,7 +19,7 @@ Set the following volumes with the -v tag.
 | `searx_etc`               | `/etc/searx`     | storage for etc  |
 | `searx_log`               | `/var/log/uwsgi` | storage for logs |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -27,7 +27,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `8080`         | `8080`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -35,7 +35,7 @@ docker-compose down
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```sh
 version: "2.1"

wiki/docker/sinusbot_-_docker.md

@@ -0,0 +1,116 @@
+# sinusbot - docker
+
+This is a [Docker](/wiki/docker.md) container for a [Sinusbot](/wiki/sinusbot.md).
+The Server consists of a single Docker container.
+
+## Set-up
+
+Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
+
+The `docker-compose.yml` file includes a network section.
+This is only needed if the [Teamspeak](/wiki/teamspeak.md) server is set up on the same machine.
+If it is not the network `teamspeak` may be removed.
+If it Teamspeak and Sinusbot are set up on the same machine make sure to include the `teamspeak`
+network in the [Teamspeak Docker container](/wiki/docker/teamspeak.md) and set an alias.
+Include the follwing lines in your teamspeak `docker-compose.yml` file under the `teamspeak3`
+service.
+
+```yml
+networks:
+  teamspeak:
+    aliases:
+      - ts3.docker.local
+```
+
+Add the following lines at the end of the `docker-compose.yml` or add it to the definition of
+already existing networks.
+
+```yml
+networks:
+  teamspeak:
+    external: true
+```
+
+Finally make sure to create the external network `teamspeak` before starting the containers.
+This can be done by running the following command.
+
+```sh
+docker network create teamspeak
+```
+
+The Teamspeak server can then be found by Sinusbot under host `ts3.docker.local` and port `9987`.
+
+Change the other settings according to your needs and run `./rebuild.sh` afterwards.
+
+### Environment-variables
+
+Set the following environment-variables in the `environment:` section of the
+docker-compose file.
+
+| Name        | Usage                          | Default |
+| ----------- | ------------------------------ | ------- |
+| `UID`       | User userid to run gitea       |         |
+| `GID`       | User groupid to run gitea      |         |
+
+### Volumes
+
+Set the following volumes in the `volumes:` section of the docker-compose file.
+
+| Outside mount/volume name | Container mount         | Description                           |
+| ------------------------- | ----------------------- | ------------------------------------- |
+| `sinusbot_scripts`        | `/opt/sinusbot/scripts` | storage for the sinusbot scripts      |
+| `sinusbot_data`           | `/opt/sinusbot/data`    | storage for the most of sinusbot data |
+
+### Ports
+
+Set the following ports in the `ports:` section.
+
+| Container Port | Recommended outside port | Protocol | Description            |
+| -------------- | ------------------------ | -------- | ---------------------- |
+| `8087`         | `8087`                   | TCP      | WebUI                  |
+
+### Networks
+
+Set the following networks in the `networks:` section of the docker-compose file.
+
+| Name        | Usage                        |
+| ----------- | ---------------------------- |
+| `teamspeak` | connect with local teamspeak |
+
+
+### rebuild.sh
+
+```sh
+#!/bin/sh
+docker-compose down
+docker pull sinusbot/docker:latest
+docker-compose up -d
+```
+
+### docker-compose.yml
+
+```yml
+version: "3.3"
+services:
+  sinusbot:
+    image: "sinusbot/docker:latest"
+    restart: unless-stopped
+    environment:
+      - UID=1000
+      - GID=1000
+    networks:
+      - teamspeak
+    volumes:
+      - sinusbot_scripts:/opt/sinusbot/scripts
+      - sinusbot_data:/opt/sinusbot/data
+
+networks:
+  teamspeak:
+    external: true
+
+volumes:
+  sinusbot_scripts:
+    driver: local
+  sinusbot_data:
+    driver: local
+```

wiki/docker/sissbrueckner_-_linkding.md

@@ -18,7 +18,7 @@ docker exec -it linkding python manage.py createsuperuser --username=joe --email
 
 You will be asked for a password via the commandline.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -26,7 +26,7 @@ Set the following volumes with the -v tag.
 | ------------------------- | ---------------------- | --------------------------- |
 | `linkding`                | `/etc/linkding/data`   | storage for persistent data |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -34,7 +34,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `9090`         | `9090`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/spikecodes_-_libreddit.md

@@ -10,7 +10,7 @@ The official container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -18,7 +18,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `8080`         | `8080`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/teamspeak.md

@@ -10,7 +10,7 @@ The official container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following variables with the -e tag.
 
@@ -18,7 +18,7 @@ Set the following variables with the -e tag.
 | ------------------- | ---------------------------- | ------- |
 | `TS3SERVER_LICENSE` | accept the license agreement |         |
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -26,7 +26,7 @@ Set the following volumes with the -v tag.
 | ------------------------- | ---------------- | --------------------------- |
 | `teamspeak3`              | `/var/ts3server` | storage for ts3-server data |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -36,7 +36,7 @@ Set the following ports with the -p tag.
 | `10011`        | `10011`                  | TCP      | ts3-intern  |
 | `30033`        | `30033`                  | TCP      | ts3-intern  |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/tetricz_-_mordhau-server.md

@@ -11,7 +11,7 @@ Change the settings according to your needs and run `./start.sh` to start
 the server.
 With `stop.sh` you can stop it.
 
-## Environment-variables
+### Environment-variables
 
 Set the following variables with the -e tag.
 
@@ -30,7 +30,7 @@ Set the following variables with the -e tag.
 | `SERVER_PASSWORD` | set a password                              |         |
 | `ADMIN_PASSWORD`  | set an admin password                       |         |
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -39,7 +39,7 @@ Set the following volumes with the -v tag.
 | `mordhau`                 | `/serverdata/mordhau`  | storage for mordhau server relevant data |
 | `mordhau_steamcmd`        | `/serverdata/steamcmd` | storage for steam related data           |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 | Container Port | Recommended outside port | Protocol | Description |
@@ -48,7 +48,7 @@ Set the following ports with the -p tag.
 | `15000` | `15000` | UDP | mordhau internal |
 | `27015` | `27015` | UDP | mordhau internal |
 
-## start.sh
+### start.sh
 
 ```sh
 #!/bin/sh
@@ -75,7 +75,7 @@ docker run --name=mordhau \
  tetricz/mordhau-server
 ```
 
-## stop.sh
+### stop.sh
 
 ```sh
 #/bin/sh

wiki/docker/tombursch_-_kitchenowl.md

@@ -1,6 +1,6 @@
 # tombursch - kitchenowl
 
-This is a [Docker](/wiki/docker.md) container for a [kitchenowl](kitchenowl)
+This is a [Docker](/wiki/docker.md) container for a [kitchenowl](/wiki/kitchenowl.md)
 server.
 The official container and documentation was made by
 [tombursch](https://github.com/tombursch/kitchenowl).
@@ -14,7 +14,7 @@ place.
 Make sure to change `JWT_SECRET_KEY`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -22,7 +22,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ----------- |
 | `7890`         | `80`                     | TCP      | WebUI       |
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -30,7 +30,7 @@ Set the following volumes with the -v tag.
 | ------------------------- | -------------------------- | ------------------------ |
 | `kitchenowl_data`         | `/data`                    | storage for all data     |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -40,7 +40,7 @@ docker pull tombursch/kitchenowl:latest
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "3"

wiki/docker/tomsquest_-_docker-radicale.md

@@ -14,7 +14,7 @@ Create a volume with the name `radicale_config`.
 Then create the `config` file in the volume `radicale_config`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -23,7 +23,7 @@ Set the following volumes with the -v tag.
 | `radicale_data`           | `/data`         | storage for caldav          |
 | `radicale_config`         | `/config`       | storage for radicale config |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -31,7 +31,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ------------- |
 | `5232`         | `5232`                   | TCP      | WebUI, caldav |
 
-## Additional
+### Additional
 
 There are some special variables to set.
 
@@ -39,7 +39,7 @@ There are some special variables to set.
 | ------------- | ---------------------------------------------------------------------- |
 | `--read-only` | make radicale read-only, caldav can still be changed and used normally |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #/bin/sh
@@ -55,7 +55,7 @@ docker run --name radicale \
     -d tomsquest/docker-radicale:2.1.11.4
 ```
 
-## radicale\_config/\_data/config
+### radicale\_config/\_data/config
 
 ```txt
 # -*- mode: conf -*-

wiki/docker/traefik.md

@@ -13,7 +13,7 @@ Place the files `data/traefik.yml` and `data/config/dynamic.yml` in the
 according directories.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -25,7 +25,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | `./data/acme.json`        | `/acme.json`              | place to store certificates for https   |
 | `./data/config`           | `/configurations`         | place for dynamically changable configs |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -34,7 +34,7 @@ Set the following ports in the `ports:` section.
 | `80`           | `80`                     | TCP      | http        |
 | `443`          | `443`                    | TCP      | https       |
 
-## Networks
+### Networks
 
 Set the following networks in the `networks:` section of the docker-compose file.
 
@@ -42,7 +42,7 @@ Set the following networks in the `networks:` section of the docker-compose file
 | ------- | -------------------------------------- |
 | `proxy` | network to expose http and https ports |
 
-## Labels
+### Labels
 
 Set the following labels in the `labels:` section.
 
@@ -58,7 +58,7 @@ Set the following labels in the `labels:` section.
 The first five lines are for publishing traefik under `traefik.<domain>`.
 The last line is to add authentication.
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -67,7 +67,7 @@ docker pull traefik:v2.4
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "3"
@@ -104,7 +104,7 @@ networks:
 
 ```
 
-## data/traefik.yml
+### data/traefik.yml
 
 ```yml
 api:
@@ -143,7 +143,7 @@ certificatesResolvers:
         entryPoint: web
 ```
 
-## data/config/dynamic.yml
+### data/config/dynamic.yml
 
 In the config replace `username:htpasswd` with the output of
 `echo $(htpasswd -nb <user> <pasword>) | sed -e s/\\$/\\$\\$/g`.
@@ -193,7 +193,9 @@ The sections called `redirect-non-www-to-www` and `redirect-www-to-non-www` are
 article by Benjamin Rancourt on his
 [website](https://www.benjaminrancourt.ca/how-to-redirect-from-non-www-to-www-with-traefik/).
 
-## Create reverse proxies
+## Usage
+
+### Create reverse proxies
 
 To create a reverse proxy from a docker container add the following lines in the
 `labels:` section of the `docker-compose.yml` of the service to proxy.
@@ -240,7 +242,7 @@ For redirection to www domains this will look something like the following.
 
 In the opposite case the domain will be `www.<subdomain>.<domain>`.
 
-## Setup Mailserver
+### Setup Mailserver
 
 If setting up a
 [docker-mailserver by mailserver](./mailserver_-_docker-mailserver.md) no http

wiki/docker/vabene1111_-_recipes.md

@@ -15,7 +15,7 @@ place.
 Make sure to set `SECRET_KEY` and `POSTGRES_PASSWORD`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -23,7 +23,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ----------- |
 | `8083`         | `8080`                   | TCP      | WebUI       |
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -32,7 +32,7 @@ Set the following volumes with the -v tag.
 | `staticfiles`             | `/opt/recipes/staticfiles` | storage for static files |
 | `mediafiles`              | `/opt/recipes/mediafiles`  | storage for media files  |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -42,7 +42,7 @@ docker pull postgres:15-alpine
 docker-compose up -d
 ```
 
-## .env
+### .env
 
 ```sh
 # only set this to true when testing/debugging
@@ -218,7 +218,7 @@ REVERSE_PROXY_AUTH=0
 # EXPORT_FILE_CACHE_DURATION=600
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "3"

wiki/docker/vectorim_-_riot-web.md

@@ -11,7 +11,7 @@ This docker-rebuild is made up by a `docker-compose.yml` file.
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -19,7 +19,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | ------------------------- | --------------------- | ----------- |
 | `./config.json`           | `/app/config.json:ro` | config file |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -27,7 +27,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ----------- |
 | `80`           | `80`                     | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -36,7 +36,7 @@ docker pull vectorim/riot-web:latest
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "2"

wiki/docker/ventz_-_bind.md

@@ -10,7 +10,7 @@ The official container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -19,7 +19,7 @@ Set the following volumes with the -v tag.
 | `bind_cache`              | `/var/cache/bind` | cache for DNS         |
 | `bind_etc`                | `/etc/bind`       | configuration for DNS |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -28,7 +28,7 @@ Set the following ports with the -p tag.
 | `53`           | `53`                     | TCP      | DNS protocol port |
 | `53`           | `53`                     | UDP      | DNS protocol port |
 
-## Additional
+### Additional
 
 There are some special variables to set.
 
@@ -36,7 +36,7 @@ There are some special variables to set.
 | ------- | ------------------------------------------------------- |
 | `--dns` | set two of these flags for specific DNS forward servers |
 
-## Rebuild
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/wabayang_-_jelu.md

@@ -0,0 +1,73 @@
+# wabayang - jelu
+
+This is a [Docker](/wiki/docker.md) container for a [Jelu](/wiki/jelu.md) server.
+The official container and documentation was made by
+[wabayang](https://github.com/bayang/jelu).
+This docker-rebuild is made up by a `docker-compose.yml` file.
+
+## Set-up
+
+Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
+Change the settings according to your needs and run `./rebuild.sh` afterwards.
+
+### Environment-variables
+
+The environment variables are set via the `.env` file and listed in the
+[corresponding section](#env).
+
+### Ports
+
+Set the following ports in the `ports:` section.
+
+| Container Port | Recommended outside port | Protocol  | Description   |
+| -------------- | ------------------------ | --------- | ------------- |
+| `11111`        | `11111`                  | TCP       | WebUI         |
+
+### Volumes
+
+Set the following volumes with the -v tag.
+
+| Outside mount/volume name | Container mount    | Description         |
+| ------------------------- | ------------------ | ------------------- |
+| `config`                  | `/config`          | configuration files |
+| `database`                | `/database`        | database            |
+| `files_images`            | `/files/images`    | path for files      |
+| `files_imports`           | `/files/imports`   | path for imports    |
+| `/etc/timezone`           | `/etc/timezone:ro` | Timezone            |
+
+### rebuild.sh
+
+```sh
+version: "2"
+services:
+  jelu:
+    image: wabayang/jelu
+    container_name: jelu
+    volumes:
+      - config:/config
+      - database:/database
+      - files_images:/files/images
+      - files_imports:/files/imports
+      - /etc/timezone:/etc/timezone:ro
+    ports:
+      - 11111:11111
+    restart: unless-stopped
+
+volumes:
+    config:
+        driver: local
+    database:
+        driver: local
+    files_images:
+        driver: local
+    files_imports:
+        driver: local
+```
+
+### docker-compose.yml
+
+```yml
+#!/bin/sh
+docker-compose down
+docker-compose up -d
+```

wiki/docker/wallabag_-_wallabag.md

@@ -12,7 +12,7 @@ and a [redis container](./redis.md) to it.
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
@@ -34,7 +34,7 @@ docker-compose file.
 | `SYMFONY__ENV__DOMAIN_NAME`       | URL to wallabag instance                 | `https://your-wallabag-url-instance.com` |
 | `SYMFONY__ENV__SERVER_NAME`       | Name for the wallabag server             | `Your wallabag instance`                 |
 
-## Volumes
+### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
@@ -42,7 +42,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | ------------------------- | ------------------------------------- | -------------------------------- |
 | `wallabag_wallabag`       | `/var/www/wallabag/web/assets/images` | storage for wallabag config data |
 
-## Ports
+### Ports
 
 Set the following ports in the `ports:` section.
 
@@ -50,7 +50,7 @@ Set the following ports in the `ports:` section.
 | -------------- | ------------------------ | -------- | ----------- |
 | `80`           | `80`                     | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -61,7 +61,7 @@ docker pull redis:alpine
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: '3'

wiki/docker/xy2z_-_pinedocs.md

@@ -9,7 +9,7 @@ The official container and documentation was made by
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -17,7 +17,7 @@ Set the following volumes with the -v tag.
 | ------------------------- | --------------- | -------------------- |
 | `pinedocs`                | `/data`         | storage for pinedocs |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -25,7 +25,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `80`           | `80`                     | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh

wiki/docker/yourls.md

@@ -11,7 +11,7 @@ In addition to the main container you need to connect a
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Environment-variables
+### Environment-variables
 
 Set the following variables with the -e tag.
 
@@ -22,7 +22,7 @@ Set the following variables with the -e tag.
 | `YOURLS_USER`    | username for yourls admin  |         |
 | `YOURLS_PASS`    | password for yourls admin  |         |
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -30,7 +30,7 @@ Set the following volumes with the -v tag.
 | ------------------------- | --------------- | -------------------- |
 | `yourls`                  | `/var/www/html` | yourls specific html |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -38,7 +38,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------------- |
 | `80`           | `80`                     | TCP      | dns protocol port |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -46,7 +46,7 @@ docker-compose down
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```yml
 version: "3.1"

wiki/docker/zedeus_-_nitter.md

@@ -11,7 +11,7 @@ Create the file `rebuild.sh`, `docker-compose.yml` and `nitter.conf` at the same
 place.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
-## Volumes
+### Volumes
 
 Set the following volumes with the -v tag.
 
@@ -19,7 +19,7 @@ Set the following volumes with the -v tag.
 | ------------------------- | --------------- | ------------------------- |
 | `nitter`                  | `/data`         | storage for all of nitter |
 
-## Ports
+### Ports
 
 Set the following ports with the -p tag.
 
@@ -27,7 +27,7 @@ Set the following ports with the -p tag.
 | -------------- | ------------------------ | -------- | ----------- |
 | `8080`         | `8080`                   | TCP      | WebUI       |
 
-## rebuild.sh
+### rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -36,7 +36,7 @@ docker pull awesometechnologies/synapse-admin:latest
 docker-compose up -d
 ```
 
-## docker-compose.yml
+### docker-compose.yml
 
 ```txt
 version: "3"
@@ -89,7 +89,7 @@ volumes:
 ```
 
 
-## nitter.conf
+### nitter.conf
 
 ```txt
 [Server]

wiki/drawio.md

@@ -0,0 +1,13 @@
+# draw.io
+
+[draw.io](https://ww.drawio.net) is a cross-platform graph drawing software application.
+
+## Setup
+
+draw.io can be used online in the browser on [their website](https://app.diagrams.net).
+Alternatively a desktop application exists.
+The setup files for [Windows](/wiki/windows.md), MacOS and [Linux](/wiki/linux.md) can be found in
+[the draw.io GitHub](https://github.com/jgraph/drawio-desktop/releases).
+For Linux-distributions there are usually also packages in the
+[corresponding package manager](/wiki/linux/package_manager.md) often called `drawio-desktop` or
+something similar

wiki/e-book.md

@@ -1,6 +1,6 @@
-# E-books
+# E-book
 
-E-books are digital publications of books.
+An E-book is a digital publication of a book.
 They can be read with specific hardware - an e-reader - or on a personal
 computer.
 E-books are usually available in `.epub` or `.pdf` files.
@@ -21,3 +21,11 @@ its supported counterpart [DeDRM by noDRM](https://github.com/noDRM/DeDRM_tools)
 Due to legal issues in many places it is recommended to not use these or
 similar software.
 If the software is to be used by you check your local laws first.
+
+## Tracking
+
+Many e-book readers include a feature to keep track of read books.
+However they do not track the time that was needed to finish them or the number of e-books read in 
+a specific timeframe.
+This can be done by using a special tracker like [Jelu](/wiki/jelu.md) which can be used to keep
+track of e-books and normal books at the same time which is a feature no e-book reader has.