Added Digital Painting

templates/docker-compose.md

@@ -7,7 +7,7 @@ This docker-rebuild is made up by a `docker-compose.yml` file.
 In addition to the main container you need to connect a
 [/additional containers needed/]() to it.
 
-## Set-up
+## Setup
 
 Create the files `rebuild.sh`, `.env` and `docker-compose.yml` at the same
 place.

templates/docker.md

@@ -4,7 +4,7 @@ This is a [Docker](/wiki/docker.md) container for a /service/ server.
 The official container and documentation was made by
 [/maintainer/]().
 
-## Set-up
+## Setup
 
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterwards.

wiki/digital_painting.md

@@ -0,0 +1,20 @@
+# Digital Painting
+
+Digital Painting is the creation of artwork using a computer or tablet instead of traditional media
+such as paper or canvas.
+It is commonly used for illustrations, concept art or comics.
+
+## Hardware
+
+Digital painting is typically performed using a
+[graphics tablet or a tablet computer](/wiki/smart_device.md#smartphones-and-tablet-computers) with
+an active stylus that supports pressure sensitivity.
+
+## Software
+
+Many digital painting applications are available.
+Popular options include the following.
+
+- [Krita](/wiki/krita.md) is a free and open-source program for digital painting.
+    It is available for [Linux](/wiki/linux.md), [Windows](/wiki/windows.md) and 
+    [Android](/wiki/android.md).

wiki/docker.md

@@ -94,6 +94,21 @@ volume belongs to.
 docker inspect <container-name>
 ```
 
+### Remove Unused Data
+
+Over time Docker accumulates unused images, stopped containers, unused networks and build cache.
+These objects continue to consume disk space even though they are no longer needed.
+
+To remove all unused resources, run the following command.
+It removes, stopped containers, unused networks, Unused images, Dangling image layers and unused
+build cache.
+
+```sh
+sudo docker system prune -a
+```
+
+Docker will ask for confirmation before deleting the resources.
+
 ## Troubleshooting
 
 This section will focus on errors and the fixing of errors of docker.

wiki/docker/actualbudget_-_actual-server.md

@@ -5,7 +5,7 @@ The official container and documentation was made by
 [actualbudget](https://actualbudget.org/docs/install/docker/).
 This docker-rebuild is made up by a `docker-compose.yml` file.
 
-## Set-up
+## Setup
 
 Create the files `rebuild.sh`, `docker-compose.yml` at the same
 place.

wiki/docker/alexjustesen_-_speedtest-tracker.md

@@ -5,7 +5,7 @@ tracker.
 The official container and documentation was made by
 [alexjustesen](https://github.com/alexjustesen/speedtest-tracker).
 
-## Set-up
+## Setup
 
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/alexta69_-_metube.md

@@ -6,7 +6,7 @@ The official container and documentation was made by
 [alexta69](https://github.com/alexta69/metube).
 This docker-rebuild is made up by a `docker-compose.yml` file.
 
-## Set-up
+## Setup
 
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/ankitects_-_syncserver.md

@@ -9,7 +9,7 @@ The syncserver can be installed to handle the syncing of data in a self-hosted w
 It is described [on GitHub](https://github.com/ankitects/anki/tree/main/docs/syncserver) and can be
 setup via [Docker](/wiki/docker.md).
 
-## Set-up
+## Setup
 
 Due to the syncserver having to be set up manually first navigate to the
 [Anki syncserver GitHub subpage](/wiki/anki.md#setup-server).

wiki/docker/awesometechnologies_-_synapse-admin.md

@@ -6,7 +6,7 @@ The official container and documentation was made by
 [awesometechnologies](https://hub.docker.com/awesometechnologies/synapse-admin).
 This docker-rebuild is made up by a `docker-compose.yml` file.
 
-## Set-up
+## Setup
 
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/axhilrex_-_podgrab.md

@@ -5,7 +5,7 @@ server.
 The official container and documentation was made by
 [axhilrex](https://github.com/akhilrex/podgrab).
 
-## Set-up
+## Setup
 
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/b4bz_-_homer.md

@@ -3,7 +3,7 @@
 This is a [Docker](/wiki/docker.md) container for a Homer static site.
 The official container and documentation was made by [b4bz](https://hub.docker.com/r/b4bz/homer).
 
-## Set-up
+## Setup
 
 Create the file `rebuild.sh`.
 Run `./rebuild.sh` afterward to create the volumes.

wiki/docker/bbilly1_-_tubearchivist.md

@@ -5,7 +5,7 @@ server.
 The Server consists of 3 Docker containers, one is the TubeArchivist main server, another is a
 TubeArchivist specific version of Elasticsearch and one a [redis](/wiki/docker/redis.md) instance.
 
-## Set-up
+## Setup
 
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/benbusby_-_whoogle-search.md

@@ -5,7 +5,7 @@ meta-search machine.
 The official container and documentation was made by
 [benbusby](https://github.com/benbusby/whoogle-search).
 
-## Set-up
+## Setup
 
 First of all create a folder for your `rebuild.sh`.
 After that clone whoogle from

wiki/docker/bilde2910_-_hauk.md

@@ -2,7 +2,7 @@
 
 This is a docker container for a [Hauk](/wiki/hauk.md).
 
-## Set-up
+## Setup
 
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Additionally, create a `config.php` file based on the

wiki/docker/chocobozzz_-_peertube.md

@@ -7,7 +7,7 @@ This docker-rebuild is made up by a `docker-compose.yml` file.
 In addition to the main container you need to connect a [redis container](/wiki/docker/redis.md) to
 it.
 
-## Set-up
+## Setup
 
 Create the files `rebuild.sh`, `.env` and `docker-compose.yml` at the same
 place.

wiki/docker/cloudrac3r_-_bibliogram.md

@@ -6,7 +6,7 @@ The official container and documentation was made by
 [cloudrac3r](https://github.com/cloudrac3r/bibliogram).
 This docker-rebuild is made up by a `docker-compose.yml` file.
 
-## Set-up
+## Setup
 
 First of all create a folder for your `rebuild.sh`.
 After that clone bibliogram from [sr.ht](https://sr.ht/~cadence/bibliogram/) into

wiki/docker/coturn_-_coturn.md

@@ -6,7 +6,7 @@ The official container and documentation was made by
 [coturn](https://github.com/coturn/coturn).
 This docker-rebuild is made up by a `docker-compose.yml` file.
 
-## Set-up
+## Setup
 
 Create the files `rebuild.sh`, `data/matrix/coturn/turnserver.conf` and `docker-compose.yml` at the
 same place.

wiki/docker/dperson_-_torproxy.md

@@ -3,7 +3,7 @@
 This is a [Docker](/wiki/docker.md) container for a [Tor](/wiki/tor.md) proxy.
 The container and documentation was made by [dperson](https://hub.docker.com/r/dperson/torproxy).
 
-## Set-up
+## Setup
 
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/dyonr_-_jackettvpn.md

@@ -5,7 +5,7 @@ protected [Jackett](/wiki/jackett.md) server.
 The official container and documentation was made by
 [dyonr](https://github.com/DyonR/docker-Jackettvpn).
 
-## Set-up
+## Setup
 
 Create the file `rebuild.sh` and set `<username>` and `<password>` according to
 your openvpn.

wiki/docker/dyonr_-_qbittorrentvpn.md

@@ -6,12 +6,14 @@ an [openVPN tunnel](/wiki/openvpn.md).
 The official container and documentation was made by
 [dyonr](https://github.com/DyonR/docker-qbittorrentvpn).
 
-## Set-up
+## Setup
 
-Create the file `rebuild.sh`.
+Create a `rebuild.sh` from the given examples – either for [OpenVPN](#openvpn-rebuildsh) or
-Change the settings according to your needs and run `./rebuild.sh` afterward.
+[Wireguard](#wireguard-rebuildsh), depending on the desired VPN protocol.
-The default username of the web interface is `admin`.
+Change the settings according to your needs and run the corresponding script afterward.
-The default password is `adminadmin`.
+
+For both variants, the default username of the web interface is `admin` and the default password is
+`adminadmin`.
 Both can be changed in the web interface after setup.
 
 ### Environment-variables
@@ -60,7 +62,7 @@ There are some special variables to set.
 | `--sysctl`  | configure systemctl    |
 
 
-### rebuild.sh
+### openvpn-rebuild.sh
 
 ```sh
 #!/bin/sh
@@ -74,11 +76,32 @@ docker run --name qbittorrentvpn \
         -v qbittorrentvpn_data:/downloads \
         -e "VPN_ENABLED=yes" \
         -e "VPN_TYPE=openvpn" \
-        -e "VPN_USERNAME=username" \
+        -e "VPN_USERNAME=<username>" \
-        -e "VPN_PASSWORD=password" \
+        -e "VPN_PASSWORD=<password>" \
         -e "LAN_NETWORK=192.168.0.0/16" \
         --cap-add NET_ADMIN \
         --device /dev/net/tun \
         --sysctl "net.ipv4.conf.all.src_valid_mark=1" \
         -d dyonr/qbittorrentvpn
 ```
+
+### wireguard-rebuild.sh
+
+```sh
+#!/bin/sh
+docker stop qbittorrentvpn
+docker rm qbittorrentvpn
+docker pull dyonr/qbittorrentvpn
+docker run --name qbittorrentvpn \
+        --restart unless-stopped \
+        --cap-add NET_ADMIN \
+        --sysctl "net.ipv4.conf.all.src_valid_mark=1" \
+        --sysctl "net.ipv6.conf.all.disable_ipv6=0" \
+        -p 9091:8080 \
+        -v qbittorrentvpn_config:/config \
+        -v qbittorrentvpn_data:/downloads \
+        -e "VPN_ENABLED=yes" \
+        -e "VPN_TYPE=wireguard" \
+        -e "LAN_NETWORK=192.168.0.0/16" \
+        -d dyonr/qbittorrentvpn
+```

wiki/docker/gitea_-_gitea.md

@@ -5,7 +5,7 @@ The Server consists of 2 Docker containers, one is the gitea main server and one
 In addition to the main container you need to connect a [mySQL container](/wiki/docker/mysql.md) to
 it.
 
-## Set-up
+## Setup
 
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/gramps-project_-_grampsweb.md

@@ -5,7 +5,7 @@ server.
 The Server consists of 2 Docker containers, one is the gramps main server – split into two
 subcontainers – and one a [redis instance](/wiki/docker/redis.md).
 
-## Set-up
+## Setup
 
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/grimsi_-_gameyfin.md

@@ -2,7 +2,7 @@
 
 This is a [Docker](/wiki/docker.md) container for a [Gameyfin](/wiki/game/gameyfin.md).
 
-## Set-up
+## Setup
 
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs.

wiki/docker/haugene_-_transmission-openvpn.md

@@ -6,7 +6,7 @@ an [openVPN tunnel](/wiki/openvpn.md).
 The official container and documentation was made by
 [haugene](https://github.com/haugene/docker-transmission-openvpn).
 
-## Set-up
+## Setup
 
 Create the file `rebuild.sh`.
 To see which providers are supported take a look at the

wiki/docker/henrywhitaker3_-_speedtest-tracker.md

@@ -5,7 +5,7 @@ tracker.
 The official container and documentation was made by
 [henrywhitaker3](https://hub.docker.com/r/henrywhitaker3/speedtest-tracker).
 
-## Set-up
+## Setup
 
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/homeassistant_-_home-assistant.md

@@ -5,7 +5,7 @@ server.
 The official container and documentation was made by
 [homeassistant](https://hub.docker.com/r/homeassistant/home-assistant).
 
-## Set-up
+## Setup
 
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/immich-app_-_immich-server.md

@@ -7,7 +7,7 @@ This docker-rebuild is made up by a `docker-compose.yml` file.
 In addition to the main container you need to connect a
 [redis](/wiki/docker/redis.md) and a [postgres](/wiki/docker/postgres.md) container to it.
 
-## Set-up
+## Setup
 
 Create the files `rebuild.sh`, `.env` and `docker-compose.yml` at the same
 place.

wiki/docker/itzg_-_minecraft-server.md

@@ -5,7 +5,7 @@ This is a [Docker](/wiki/docker.md) container for a
 The container and documentation was made by
 [itzg](https://hub.docker.com/r/itzg/minecraft-server).
 
-## Set-up
+## Setup
 
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/iv-org_-_invidious.md

@@ -8,7 +8,7 @@ There is no official pre-build on docker-hub.
 In addition to the main container you need to connect a
 [postgres container](/wiki/docker/postgres.md) to it.
 
-## Set-up
+## Setup
 
 First of all create a folder for your `rebuild.sh`.
 After that clone invidious from [GitHub](https://github.com/iv-org/invidious) into a folder within

wiki/docker/jkarlos_-_git-server-docker.md

@@ -4,7 +4,7 @@ This is a [Docker](/wiki/docker.md) container for a [git](/wiki/git_%28general%2
 The official container and documentation was made by
 [jkarlos](https://hub.docker.com/r/jkarlos/git-server-docker).
 
-## Set-up
+## Setup
 
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/johnktims_-_folding-at-home.md

@@ -5,7 +5,7 @@ This is a [Docker](/wiki/docker.md) container for
 The official container and documentation was made by
 [johnktims](https://hub.docker.com/r/johnktims/folding-at-home).
 
-## Set-up
+## Setup
 
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/kiwix_-_kiwix-serve.md

@@ -4,7 +4,7 @@ This is a [Docker](/wiki/docker.md) container for a [Kiwix](/wiki/kiwix.md) serv
 The official container and documentation was made by
 [kiwix](https://github.com/kiwix/kiwix-tools/pkgs/container/kiwix-serve).
 
-## Set-up
+## Setup
 
 Create the file `rebuild.sh`.
 Make sure to place the `.zim` files inside the volume.

wiki/docker/kohakuhub_-_kohakuhub.md

@@ -6,7 +6,7 @@ The Server consists of multiple Docker containers.
 These are containers for the KohakuHub API and – depending on configuration – MinIO, LakeFS,
 [Postgres](/wiki/docker/postgres.md)
 
-## Set-up
+## Setup
 
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 The file `docker-compose.yml` is usually created automatically.

wiki/docker/kylemanna_-_openvpn.md

@@ -5,7 +5,7 @@ This is a [Docker](/wiki/docker.md) container for an
 The official container and documentation was made by
 [kylemanna](https://hub.docker.com/r/kylemanna/openvpn).
 
-## Set-up
+## Setup
 
 Create the file `rebuild.sh`.
 Change the settings according to your needs.

wiki/docker/linuxserver_-_airsonic-advanced.md

@@ -5,7 +5,7 @@ This is a [Docker](/wiki/docker.md) container for a
 The official container and documentation was made by
 [linuxserver](https://github.com/linuxserver/docker-airsonic-advanced).
 
-## Set-up
+## Setup
 
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/linuxserver_-_airsonic.md

@@ -5,7 +5,7 @@ server.
 The official container and documentation was made by
 [linuxserver](https://hub.docker.com/r/linuxserver/airsonic).
 
-## Set-up
+## Setup
 
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/linuxserver_-_calibre-web.md

@@ -5,7 +5,7 @@ The official container and documentation was made by
 [linuxserver](https://github.com/linuxserver/docker-calibre-web).
 This docker-rebuild is made up by a `docker-compose.yml` file.
 
-## Set-up
+## Setup
 
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/linuxserver_-_freshrss.md

@@ -6,7 +6,7 @@ The official container and documentation was made by
 [linuxserver](https://docs.linuxserver.io/images/docker-freshrss).
 This docker-rebuild is made up by a `docker-compose.yml` file.
 
-## Set-up
+## Setup
 
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/linuxserver_-_jellyfin.md

@@ -6,7 +6,7 @@ The official container and documentation was made by
 [linuxserver](https://hub.docker.com/r/linuxserver/jellyfin).
 This docker-rebuild is made up by a `docker-compose.yml` file.
 
-## Set-up
+## Setup
 
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/linuxserver_-_lidarr.md

@@ -5,7 +5,7 @@ server.
 The official container and documentation was made by
 [linuxserver](https://hub.docker.com/r/linuxserver/lidarr).
 
-## Set-up
+## Setup
 
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/linuxserver_-_radarr.md

@@ -5,7 +5,7 @@ server.
 The official container and documentation was made by
 [linuxserver](https://hub.docker.com/r/linuxserver/radarr).
 
-## Set-up
+## Setup
 
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/linuxserver_-_sonarr.md

@@ -5,7 +5,7 @@ server.
 The official container and documentation was made by
 [linuxserver](https://hub.docker.com/r/linuxserver/sonarr).
 
-## Set-up
+## Setup
 
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/linuxserver_-_syncthing.md

@@ -5,7 +5,7 @@ This is a [Docker](/wiki/docker.md) container for syncthing for
 The official container and documentation was made by
 [linuxserver](https://hub.docker.com/r/linuxserver/syncthing).
 
-## Set-up
+## Setup
 
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/linuxserver_-_tvheadend.md

@@ -5,7 +5,7 @@ server.
 The official container and documentation was made by
 [linuxserver](https://hub.docker.com/r/linuxserver/tvheadend).
 
-## Set-up
+## Setup
 
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/linuxserver_-_wireguard.md

@@ -5,7 +5,7 @@ This is a [Docker](/wiki/docker.md) container for a
 The official container and documentation was made by
 [linuxserver](https://hub.docker.com/r/linuxserver/wireguard).
 
-## Set-Up
+## Setup
 
 Create the file `rebuild.sh`.
 Change the settings according to your needs.
@@ -101,4 +101,4 @@ certificate.
 ### Add New Client to Existing WireGuard Installation
 
 To add a new client to the existing WireGuard installation increase the number
-of peers or append a peer to the list of peers specified in the [setup section](#set-up) section.
+of peers or append a peer to the list of peers specified in the [setup section](#setup) section.

wiki/docker/mailserver_-_docker-mailserver.md

@@ -5,9 +5,9 @@ The official container and documentation was made by
 [mailserver](https://hub.docker.com/r/mailserver/docker-mailserver).
 It contains dovecot, antispam, antivirus, ssl and many more features.
 
-## Set-up
+## Setup
 
-This section addresses the set-up of the docker-mailserver [Docker](/wiki/docker.md) container.
+This section addresses the setup of the docker-mailserver [Docker](/wiki/docker.md) container.
 
 ### Download
 
@@ -151,7 +151,7 @@ No further setup is needed and [emails](/wiki/email.md) using the new domains ca
 
 After setting up the [Email](/wiki/email.md) server, some [Client](/wiki/email.md#client)
 configurations may be taken.
-Especially recommended is the set-up of
+Especially recommended is the setup of
 [end-to-end encryption](/wiki/email.md#end-to-end-encryption).
 
 ### rebuild.sh

wiki/docker/mariadb.md

@@ -5,7 +5,7 @@ The official container and documentation was made by [mariadb](https://hub.docke
 The Docker container is mainly used in combination with other containers.
 To achieve this in the easiest way use a docker-compose file.
 
-## Set-Up
+## Setup
 
 The mariadb Docker container is dependent on another container most of the time.
 The exact setup will be described in the regarding entry.

wiki/docker/massivedecks_-_client.md

@@ -9,7 +9,7 @@ This docker-rebuild is made up by a `docker-compose.yml` file.
 In addition to the client and server containers a [postgres container](/wiki/docker/postgres.md)
 needs to be connected.
 
-## Set-up
+## Setup
 
 Create the files `rebuild.sh`, `.env` and `docker-compose.yml` at the same
 place.

wiki/docker/matrixdotorg_-_synapse.md

@@ -6,7 +6,7 @@ The official container and documentation was made by
 [matrixdotorg](https://hub.docker.com/matrixdotorg/synapse).
 This docker-rebuild is made up by a `docker-compose.yml` file.
 
-## Set-up
+## Setup
 
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/mikenye_-_picard.md

@@ -6,7 +6,7 @@ This is a [Docker](/wiki/docker.md) container for a
 The official container and documentation was made by
 [mikenye](https://github.com/mikenye/docker-picard).
 
-## Set-up
+## Setup
 
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/nextcloud.md

@@ -8,7 +8,7 @@ The services in this files are explained seperately.
 The main Docker container needs a database in form of a [MariaDB](/wiki/docker/mariadb.md)
 Docker container.
 
-## Set-up
+## Setup
 
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/nginx.md

@@ -6,7 +6,7 @@ The official container and documentation was made by
 [nginx](https://hub.docker.com/_/nginx).
 This docker-rebuild is made up by a `docker-compose.yml` file.
 
-## Set-up
+## Setup
 
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/olbat_-_cupsd.md

@@ -4,7 +4,7 @@ This is a [Docker](/wiki/docker.md) container for a [Cups](/wiki/cups.md) server
 The official container and documentation was made by
 [olbat](https://hub.docker.com/r/olbat/cupsd).
 
-## Set-up
+## Setup
 
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/ollama_-_ollama.md

@@ -4,7 +4,7 @@ This is a [Docker](/wiki/docker.md) container for an ollama server.
 The official container and documentation was made by
 [ollama](https://hub.docker.com/r/ollama/ollama).
 
-## Set-up
+## Setup
 
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/open-webui_-_open-webui.md

@@ -4,7 +4,7 @@ This is a [Docker](/wiki/docker.md) container for a Open WebUI server.
 The official container and documentation was made by
 [open-webui](https://github.com/open-webui/open-webui).
 
-## Set-up
+## Setup
 
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/owncloud.md

@@ -7,7 +7,7 @@ The services in this files are explained seperately.
 The main Docker container needs a database in form of a [MariaDB](/wiki/docker/mariadb.md) Docker
 container.
 
-## Set-up
+## Setup
 
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/oznu_-_docker-cloudflare-ddns.md

@@ -5,7 +5,7 @@ cloudflare dns entries.
 The official container and documentation was made by
 [oznu](https://github.com/oznu/docker-cloudflare-ddns).
 
-## Set-up
+## Setup
 
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/oznu_-_onedrive.md

@@ -3,7 +3,7 @@
 This is a docker container for a onedrive client.
 The official container and documentation was made by [oznu](https://hub.docker.com/r/oznu/onedrive).
 
-## Set-up
+## Setup
 
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/portainer_-_agent.md

@@ -5,7 +5,7 @@ agent.
 The official container and documentation was made by
 [portainer](https://hub.docker.com/r/portainer/agent).
 
-## Set-up
+## Setup
 
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/portainer_-_portainer.md

@@ -5,7 +5,7 @@ server.
 The official container and documentation was made by
 [portainer](https://hub.docker.com/r/portainer/portainer).
 
-## Set-up
+## Setup
 
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/prologic_-_golinks.md

@@ -5,7 +5,7 @@ bookmarks, commands and aliases.
 The official container and documentation was made by
 [prologic](https://git.mills.io/prologic/golinks).
 
-## Set-up
+## Setup
 
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/prologic_-_gopherproxy.md

@@ -4,7 +4,7 @@ This is a [Docker](/wiki/docker.md) container for a gopher to http proxy.
 The official container and documentation was made by
 [prologic](https://hub.docker.com/r/prologic/gopherproxy).
 
-## Set-up
+## Setup
 
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/prologic_-_todo.md

@@ -4,7 +4,7 @@ This is a [Docker](/wiki/docker.md) container for a todo-manager.
 The official container and documentation was made by
 [prologic](https://hub.docker.com/r/prologic/todo).
 
-## Set-up
+## Setup
 
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/qmcgaw_-_gluetun.md

@@ -0,0 +1,66 @@
+# qmcgaw – gluetun
+
+This is a [Docker](/wiki/docker.md) container for a [Gluetun](/wiki/gluetun.md) [VPN](/wiki/vpn.md)
+client.
+The official container and documentation was made by [qmcgaw](https://github.com/qdm12/gluetun).
+
+## Setup
+
+Create the file `rebuild.sh`.
+Change the settings according to your needs and run `./rebuild.sh` afterward.
+
+## Environment-variables
+
+Set the following variables with the `-e` tag.
+
+| Name                     | Usage                                        | Default |
+| ------------------------ | -------------------------------------------- | ------- |
+| `VPN_SERVICE_PROVIDER`   | VPN provider                                 |         |
+| `VPN_TYPE`               | VPN type (`wireguard` or `openvpn`)          |         |
+| `VPN_ENDPOINT_IP`        | VPN server IP address                        |         |
+| `VPN_ENDPOINT_PORT`      | VPN server port                              |         |
+| `WIREGUARD_PUBLIC_KEY`   | WireGuard server public key                  |         |
+| `WIREGUARD_PRIVATE_KEY`  | WireGuard client private key                 |         |
+| `WIREGUARD_ADDRESSES`    | WireGuard client IP address                  |         |
+| `HTTPPROXY`              | Enable HTTP proxy                            | `false` |
+| `HTTPPROXY_STEALTH`      | Hide proxy-related headers                   | `false` |
+
+## Ports
+
+Set the following ports with the `-p` tag.
+
+| Container Port | Recommended outside port | Protocol | Description |
+| -------------- | ------------------------ | -------- | ----------- |
+| `8888`         | `9050`                   | TCP      | HTTP proxy  |
+
+## Capabilities
+
+The following Linux capabilities have to be added.
+
+| Capability |
+| ---------- |
+| `NET_ADMIN` |
+
+## rebuild.sh
+
+```sh
+#!/bin/sh
+docker stop gluetun
+docker rm gluetun
+docker pull qmcgaw/gluetun
+
+docker run --name gluetun \
+    --restart unless-stopped \
+    --cap-add=NET_ADMIN \
+    -e VPN_SERVICE_PROVIDER=custom \
+    -e VPN_TYPE=wireguard \
+    -e VPN_ENDPOINT_IP="<server-ip>" \
+    -e VPN_ENDPOINT_PORT="<server-port>" \
+    -e WIREGUARD_PUBLIC_KEY="<public-key>" \
+    -e WIREGUARD_PRIVATE_KEY="<private-key>" \
+    -e WIREGUARD_ADDRESSES="<client-address>/32" \
+    -e HTTPPROXY=true \
+    -e HTTPPROXY_STEALTH=true \
+    -p 9050:8888 \
+    -d qmcgaw/gluetun
+```

wiki/docker/rblsb_-_synctube.md

@@ -6,7 +6,7 @@ The official container and documentation was made by
 [rblsb](https://github.com/rblsb/synctube).
 There is no official pre-build on docker-hub.
 
-## Set-up
+## Setup
 
 First of all create a folder for your `rebuild.sh`.
 After that clone synctube from [GitHub](https://github.com/rblsb/synctube) into

wiki/docker/rlister_-_hastebin.md

@@ -4,7 +4,7 @@ This is a [Docker](/wiki/docker.md) container for a hastebin server.
 The official container and documentation was made by
 [rlister](https://hub.docker.com/r/rlister/hastebin).
 
-## Set-up
+## Setup
 
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/samba.md

@@ -5,7 +5,7 @@ server.
 The official container and documentation was made by
 [dperson](https://hub.docker.com/r/samba).
 
-## Set-up
+## Setup
 
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/searx_-_searx.md

@@ -5,7 +5,7 @@ meta-search machine.
 The official container and documentation was made by
 [searx](https://hub.docker.com/r/searx/searx).
 
-## Set-up
+## Setup
 
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/sinusbot_-_docker.md

@@ -3,7 +3,7 @@
 This is a [Docker](/wiki/docker.md) container for a [Sinusbot](/wiki/sinusbot.md).
 The Server consists of a single Docker container.
 
-## Set-up
+## Setup
 
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 

wiki/docker/sissbrueckner_-_linkding.md

@@ -5,7 +5,7 @@ bookmark and archive service.
 The official container and documentation was made by
 [sissbrueckner](https://github.com/sissbruecker/linkding).
 
-## Set-up
+## Setup
 
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/spikecodes_-_libreddit.md

@@ -5,7 +5,7 @@ frontend [libreddit](/wiki/libreddit.md).
 The official container and documentation was made by
 [spikecodes](https://github.com/spikecodes/libreddit).
 
-## Set-up
+## Setup
 
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/teamspeak.md

@@ -5,7 +5,7 @@ This is a [Docker](/wiki/docker.md) container for a
 The official container and documentation was made by
 [Teamspeak](https://hub.docker.com/_/teamspeak).
 
-## Set-up
+## Setup
 
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/tetricz_-_mordhau-server.md

@@ -4,7 +4,7 @@ This is a [Docker](/wiki/docker.md) container for a mordhau server.
 The official container and documentation was made by
 [tetricz](https://hub.docker.com/r/tetricz/mordhau-server).
 
-## Set-up
+## Setup
 
 Create the files `start.sh` and `stop.sh`.
 Change the settings according to your needs and run `./start.sh` to start

wiki/docker/tombursch_-_kitchenowl.md

@@ -7,7 +7,7 @@ The official container and documentation was made by
 This docker-rebuild is made up by a `docker-compose.yml` file.
 The Server consists of two Docker containers, one is the kitchenowl frontend, another is a backend.
 
-## Set-up
+## Setup
 
 Create the files `rebuild.sh` and `docker-compose.yml` at the same
 place.

wiki/docker/tomsquest_-_docker-radicale.md

@@ -7,7 +7,7 @@ The official container and documentation was made by
 The `latest` tag at the moment of writing this readme was corrupted.
 The last usable tag was used therefore to guarantee best performance for all users.
 
-## Set-up
+## Setup
 
 Create the file `rebuild.sh`.
 Create a volume with the name `radicale_config`.

wiki/docker/traefik.md

@@ -5,7 +5,7 @@ The official container and documentation was made by
 [traefik](https://hub.docker.com/_/traefik).
 This docker-rebuild is made up by a `docker-compose.yml` file.
 
-## Set-up
+## Setup
 
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 In that folder create the directories `data/config`.

wiki/docker/vabene1111_-_recipes.md

@@ -8,7 +8,7 @@ This docker-rebuild is made up by a `docker-compose.yml` file.
 In addition to the main container you need to connect a
 [postgres container](/wiki/docker/postgres.md) to it.
 
-## Set-up
+## Setup
 
 Create the files `rebuild.sh`, `.env` and `docker-compose.yml` at the same
 place.

wiki/docker/vectorim_-_riot-web.md

@@ -6,7 +6,7 @@ The official container and documentation was made by
 [linuxserver](https://hub.docker.com/vectorim/riot-web).
 This docker-rebuild is made up by a `docker-compose.yml` file.
 
-## Set-up
+## Setup
 
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/ventz_-_bind.md

@@ -5,7 +5,7 @@ This is a [Docker](/wiki/docker.md) container for a [bind](/wiki/bind.md)
 The official container and documentation was made by
 [ventz](https://hub.docker.com/r/ventz/bind).
 
-## Set-up
+## Setup
 
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/viperproject_-_viperserver.md

@@ -6,7 +6,7 @@ server, which is used for building the Viper verifiers
 The official container and documentation was made by
 [viperproject](https://hub.docker.com/r/viperproject/viperserver).
 
-## Set-up
+## Setup
 
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/wabayang_-_jelu.md

@@ -5,7 +5,7 @@ The official container and documentation was made by
 [wabayang](https://github.com/bayang/jelu).
 This docker-rebuild is made up by a `docker-compose.yml` file.
 
-## Set-up
+## Setup
 
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/wallabag_-_wallabag.md

@@ -6,7 +6,7 @@ one a Redis instance.
 In addition to the main container you need to connect a
 [mariadb container](/wiki/docker/mariadb.md) and a [redis container](/wiki/docker/redis.md) to it.
 
-## Set-up
+## Setup
 
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/xy2z_-_pinedocs.md

@@ -4,7 +4,7 @@ This is a [Docker](/wiki/docker.md) container for the file viewer pinedocs.
 The official container and documentation was made by
 [xy2z](https://hub.docker.com/r/xy2z/pinedocs).
 
-## Set-up
+## Setup
 
 Create the file `rebuild.sh`.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/yourls.md

@@ -5,7 +5,7 @@ The official container and documentation was made by [YOURLS](https://hub.docker
 In addition to the main container you need to connect a [mySQL container](/wiki/docker/mysql.md) to
 it.
 
-## Set-up
+## Setup
 
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
 Change the settings according to your needs and run `./rebuild.sh` afterward.

wiki/docker/zedeus_-_nitter.md

@@ -5,7 +5,7 @@ frontend [nitter](/wiki/nitter.md).
 The official container and documentation was made by
 [zedeus](https://github.com/zedeus/nitter).
 
-## Set-up
+## Setup
 
 Create the file `rebuild.sh`, `docker-compose.yml` and `nitter.conf` at the same
 place.

wiki/email.md

@@ -65,7 +65,7 @@ mail._domainkey.<domain>.    TXT    "v=DKIM1; h=sha256; k=rsa; p=<public-key>"
 The key has to be retrieved from the mail server.
 For example for [docker-mailserver](/wiki/docker/mailserver_-_docker-mailserver.md) the process is
 described in the
-[corresponding set-up section](/wiki/docker/mailserver_-_docker-mailserver.md#set-up).
+[corresponding setup section](/wiki/docker/mailserver_-_docker-mailserver.md#setup).
 
 #### DMARC record
 

wiki/firefox.md

@@ -37,6 +37,7 @@ The following add-ons increase the security or privacy.
   lets you separate cookies in different containers on a per site base.
   With this add-on a proxy can be selected for each container which enables usage of a 
   [VPN](/wiki/vpn.md) that acts as a Proxy like a [OpenVPN Proxy](/wiki/openvpn.md#proxy).
+  For this software like [Gluetun](/wiki/gluetun.md) can be used.
 - [I don't care about cookies](https://addons.mozilla.org/en-US/firefox/addon/i-dont-care-about-cookies/)
   is an even faster alternative to Consent-O-Matic.
 - [Temporary Containers](https://addons.mozilla.org/en-GB/firefox/addon/temporary-containers) opens 

wiki/gluetun.md

@@ -0,0 +1,21 @@
+# Gluetun
+
+[Gluetun](https://github.com/qdm12/gluetun) is a free and open-source Docker-based VPN client.
+It supports multiple VPN providers and protocols including [WireGuard](/wiki/wireguard.md) and
+[OpenVPN](/wiki/openvpn.md).
+
+## Setup
+
+Gluetun can be set up via [Docker](/wiki/docker.md) with the
+[qmcgaw image](/wiki/docker/qmcgaw_-_gluetun.md).
+
+## Usage
+
+This section addresses the usage of Gluetun.
+
+### Routing Traffic of Firefox' Containers
+
+Gluetun routes the network traffic of Docker containers through a VPN tunnel.
+It can be used as a gateway for other containers or in combination with [Firefox'](/wiki/firefox.md)
+Multi-Account Containers to access selected websites through a VPN without routing all system
+traffic through the tunnel.

wiki/image.md

@@ -8,8 +8,10 @@ This entry also features medicinal image and visual formats such as DICOM.
 ## Viewer
 
 - [sxiv](https://github.com/xyb3rt/sxiv) is an image viewer for [Linux'](/wiki/linux.md)
-  [X window system](/wiki/linux/x_window_system.md).
+    [X window system](/wiki/linux/x_window_system.md).
 - [Weasis](https://github.com/nroduit/Weasis) is a cross-platform DICOM viewer.
+- [imv](https://sr.ht/~exec64/imv/) is an image viewer native to [Linux'](/wiki/linux.md)
+    [Wayland](/wiki/linux/wayland.md).
 
 ## Editors
 

wiki/krita.md

@@ -0,0 +1,34 @@
+# Krita
+
+[Krita](https://krita.org/) is a free and open-source cross-platform
+[digital painting](/wiki/digital_painting.md) program focused on illustrations, concept art, comics
+and animation.
+It is available for [Linux](/wiki/linux.md), [Windows](/wiki/windows.md) and
+[Android](/wiki/android.md).
+
+## Setup
+
+The Krita program can be installed from source as described [on GitHub](https://github.com/KDE/krita).
+Alternatively many [Linux](/wiki/linux.md) [package managers](/wiki/linux/package_manager.md)
+package Krita in the `krita` package.
+
+The software can also be installed on [Android](/wiki/android.md) via
+[F-Droid](/wiki/android/f-droid.md) packaged under
+[org.krita](https://f-droid.org/packages/org.krita/).
+
+## Usage
+
+This section addresses the usage of Krita.
+
+### Disable Finger Drawing (Pen-only Mode)
+
+On [Android](/wiki/android.md), accidental touches from your hand can create unwanted brush strokes.
+While palm rejection is primarily handled by the tablet hardware, Krita allows disabling drawing
+with touch input.
+
+To enable pen-only drawing navigate to *Settings*, *Configure Krita*, *General* and *Tools* and
+disable *Enable Touch Painting*.
+Afterward, restart Krita.
+
+After restarting, only the stylus can draw, while finger touches are ignored.
+This provides a better drawing experience on devices with active stylus support.

wiki/laundry.md

@@ -0,0 +1,85 @@
+# Laundry
+
+This article is about laundry and all the steps involved in cleaning them.
+
+## Process of Washing and Drying Clothes
+
+This section explains the basic process of washing and drying clothes while preserving their quality
+and avoiding common mistakes.
+
+## Sort Laundry
+
+Separate laundry before washing according to color and material.
+One category should – in the following steps – not be washed with another.
+
+- Light colors: e.g. beige, pastel colors, light blue
+- White clothes
+- Dark colors: e.g. black, dark blue, gray, dark green
+- Bright colors: e.g. red
+- Towels and underwear
+- Sportswear made from functional fabrics
+- Cleaning cloths
+
+## Check the Care Label
+
+Before washing, check the care label inside the garment.
+
+Pay particular attention to the following information:
+
+- Maximum washing temperature (e.g. 30 °C or 40 °C)
+- Whether tumble drying is allowed
+- Whether a delicate wash cycle is required
+
+## Load the Washing Machine
+
+Do not overload the washing machine.
+There should still be enough space to fit one hand comfortably above the laundry inside the drum.
+
+For better results turn jeans, T-shirts, sweatshirts and jerseys inside out to protect colors and
+prints and close all zippers and buttons before washing.
+
+## Select the Washing Program
+
+The following programs are recommended for common types of laundry.
+
+| Clothing | Program | Temperature | Spin Speed |
+| --------- | ------- | ----------- | ---------- |
+| Cleaning cloths | Cotton | 90 °C | Maximum |
+| Towels and underwear | Eco / Cotton | 40–60 °C | Maximum |
+| T-shirts | Easy Care | 30 °C | 600–800 rpm |
+| Sweatshirts | Easy Care | 30 °C | 600–800 rpm |
+| Jeans | Easy Care | 30 °C | 600 rpm |
+| Sports jerseys and sports trousers | Outdoor | 30 °C | 600 rpm |
+| Fencing clothing | Outdoor | 30 °C | 400 rpm |
+
+## Add Detergent
+
+Use the appropriate detergent for the type of laundry.
+
+- Heavy-duty detergent for cleaning cloths
+- Sports detergent for sportswear
+- Delicate detergent for all other clothes washed at 30 °C
+- Do not use heavy-duty detergent for colored clothes as it may cause fading
+
+The detergent drawer is typically organized as follows (from left to right):
+
+1. Main wash detergent
+2. Fabric softener
+3. Pre-wash detergent
+
+## After Washing
+
+After the washing program has finished:
+
+- Remove the laundry immediately.
+- Leave the washing machine door and detergent drawer open to allow the machine to dry.
+- Return the program selector to the 12 o'clock position.
+- Towels, bed linen and underwear can usually be tumble dried.
+
+## Tumble Dryer
+
+When using a tumble dryer:
+
+- Do not operate it unattended or overnight.
+- After every drying cycle, switch it off completely.
+- Clean both lint filters after or before every use to reduce the risk of fire.

wiki/linux/dm-crypt.md

@@ -12,7 +12,9 @@ To create a encrypted device simply run the following command.
 cryptsetup -c aes-xts-plain -s 512 -y -v luksFormat /dev/sda2
 ```
 
-Where `/dev/sda2` is the device to be created.
+`/dev/sda2` is the device to be created.
+This command will automatically ask for a passowrd and add it as a keyslot to a given volume.
+
 
 ### Create/Add a Key File to an encrypted volume
 
@@ -37,8 +39,8 @@ openssl genrsa -out <path to destination> 4096
 
 The key file will then be saved  to `<path to destination>`.
 
-Finally, the key file can be added to an opened LUKS encrypted volume by running the following
+Finally, the key file can be added as a keyslot to an opened LUKS encrypted volume by running the
-command.
+following command.
 
 ```sh
 cryptsetup luksAddKey <path to LUKS volume> <path to key file>
@@ -191,7 +193,7 @@ If so the encrypted partition should be decrypted automatically.
 ### Automatical Mounting of an Encrypted Volume
 
 For automatic mounting of an encrypted volume a keyfile is needed.
-This will be achieved by entries in the file`/etc/fstab` aswell as the file
+This will be achieved by entries in the file`/etc/fstab` as well as the file
 `/etc/crypttab`.
 First adapt and insert the following lines into `/etc/fstab`:
 
@@ -218,6 +220,8 @@ created in the previous step (for example `/root/key.bin`).
 
 ### Use FIDO2 to Unlock a Volume
 
+This guide will add a FIDO2 stick as a keyslot for a given volume.
+
 To use a FIDO2-Stick on [Linux-based systems](/wiki/linux.md) with
 [DM-Crypt](/wiki/linux/dm-crypt.md) first set up the FIDO2 stick and add it to the encrypted
 volume.
@@ -229,6 +233,12 @@ sudo systemd-cryptenroll --fido2-device=auto /dev/nvme0n1p1
 sudo cryptsetup open --token-only /dev/nvme1n1p2 test
 ```
 
+In the `systemd-cryptenroll` command the flag `--fido2-with-client-pin=no` can be also be set to
+disable the pin.
+Similarly `--fido2-with-user-presence=no` will disable the user showing his presence by pressing the
+button on the FIDO 2 stick and  `--fido2-with-user-verification=no` disables the need for user
+verification.
+
 Next the hooks in the file `/etc/mkinitcpio.conf` need to be changed.
 It is recommended to set up [Plymouth]() so that the login screen is clean.
 Switch `udev` and other `HOOKS` to `systemd`.
@@ -239,7 +249,7 @@ For this switch `udev keymap consolefont encrypt` to `systemd sd-vconsole sd-enc
 Then the file `/boot/loader/entries/arch.conf` and `/boot/loader/entries/arch-fallback.conf` needs
 to be changed.
 For this the following example is given.
-Notice that `cryptdevice=UUID=` is switched to `rd.luks.name=` aswell as various options.
+Notice that `cryptdevice=UUID=` is switched to `rd.luks.name=` as well as various options.
 
 ```txt
 options		cryptdevice=UUID=3c306b1b-49a5-48c1-b93f-a619b96d6855:lvm:allow-discards root=/dev/mapper/main-root resume=/dev/mapper/main-swap rw quiet splash cryptdevice=/dev/usbkey:14848:2048
@@ -256,3 +266,25 @@ Make sure to touch FIDO2-key during boot to make it work.
 sudo mkinitcpio -p linux
 reboot
 ```
+
+### Removing a Keyslot
+
+LUKS supports multiple keyslots, allowing several passwords, key files or hardware tokens to unlock
+the same encrypted volume.
+If a key is no longer needed, the corresponding keyslot can be removed.
+
+To remove a keyslot, replace `<LUKS-device-path>` with the encrypted device (e.g. `/dev/sda2`)
+and `<slot>` with the keyslot number.
+
+```sh
+sudo systemd-cryptenroll <LUKS-device-path> --wipe-slot=<slot>
+```
+
+The available keyslots can be listed beforehand using the following command.
+
+```sh
+sudo systemd-cryptenroll <LUKS-device-path>
+```
+
+Be careful not to remove the last remaining valid keyslot, otherwise the encrypted volume can no
+longer be unlocked.

wiki/linux/lightdm.md

@@ -45,6 +45,17 @@ Check which session is created by your compositor.
 ln -s /usr/share/wayland-sessions/<session> /usr/share/wayland-sessions/default.desktop
 ```
 
+However, for Wayland the call for the compositor can also occur in the `.profile` file or another
+file that is called at startup.
+In this case replace the `Exec` line with a dummy.
+This can look similar to the following.
+
+```txt
+Exec=echo "ok"
+```
+
+Alternatively to linking the session to `default.desktop` the `.dmrc` file can also be set to the
+name of the session.
 
 Before finishing the setup the functionality should be tested.
 This can be done by using one or both of the following commands.

wiki/linux/openssh.md

@@ -176,6 +176,9 @@ kill <process-id>
 Files that are based on a remote server can be mounted as described in
 [the corresponding section](#mount-directory-with-sshfs) to set up complete remote development.
 
+This can also be used for tunneling [VNC](/wiki/vnc.md) which is then called
+[VNC over SSH](/wiki/vnc.md#vnc-over-ssh).
+
 ### Specify Key Exchange Algorithms
 
 It can be useful to specify the key exchange algorithms in the OpenSSH config file `~/.ssh/config`.

wiki/linux/package_manager.md

@@ -20,5 +20,12 @@ across distributions.
 These formats are not package managers.
 They distribute standalone applications that can run independently of the system package database.
 
-- [AppImage](/wiki/linux/appimage.md)
+- [AppImage](/wiki/linux/appimage.md) packages applications together with their dependencies in a
-- [Flatpak](/wiki/linux/flatpak.md)
+    single executable file.
+- [Flatpak](/wiki/linux/flatpak.md) distributes sandboxed desktop applications across different
+    Linux distributions.
+- [uv](/wiki/programming_language/python/uv.md) manages Python installations,
+    [virtual environments](/wiki/programming_language/python.md#using-virtual-environments), project
+    dependencies and Python-based command-line tools.
+- [pip](/wiki/programming_language/python/pip.md) manages Python installations and can be used in a
+    virtual environment.

wiki/linux/package_manager/pacman_and_aur.md

@@ -2,21 +2,26 @@
 
 In [Arch Linux](/wiki/linux/arch-linux.md) there are 2 main types of
 package managers.
-The first is pacman, the default package manager.
+The first is Pacman, the default package manager.
 
 For the second type there are many different managers to chose from.
 Those managers are handling for the Arch User Repositories (AUR).
 
 In this article yay is used as the go to AUR manager.
-yay is also a wrapper for pacman so yay can be used instead of pacman to
+yay is also a wrapper for Pacman so yay can be used instead of Pacman to
 install and update both AUR and main repository programs.
 It features the same syntax.
 
 ## Usage
 
-This section addresses various usages of the arch linux package managers.
+This section addresses various usages of the [Arch Linux](/wiki/linux/arch-linux.md) package
+managers.
 
-### Yay: Remove Make Dependencies 
+### Yay
+
+Commands that are available for Pacman are also available for Yay and some other AUR managers.
+
+#### Remove Make Dependencies
 
 This section is based on a
 [Reddit comment by AnalShart](https://www.reddit.com/r/archlinux/comments/116dd58/is_it_possible_to_default_remove_make).
@@ -30,6 +35,39 @@ by editing it accordingly.
 }
 ```
 
+### Installing Packages
+
+This section focuses on the installation of packages.
+Before installing new software it is recommended to synchronize the package databases and update the
+system.
+
+```sh
+pacman -Sy
+```
+
+Afterward, install the desired package by replacing `<package>` with its name.
+
+```sh
+pacman -S <package>
+```
+
+Alternatively both steps can be done simultaneously using the following command.
+
+```sh
+pacman -Sy <package>
+```
+
+### Removing Packages
+
+Packages can be removed together with their dependencies and configuration files if they are no
+longer needed.
+This is the recommended way to remove packages as it also gets rid of dependencies that are no
+longer required by other packages and its configuration files.
+
+```sh
+pacman -Rns <package>
+```
+
 ### Ignoring Packages
 
 Packages can be ignored by adding the package in `/etc/pacman.conf` under `IgnorePkg`.
@@ -50,7 +88,7 @@ This program can then easily be used to an AUR package.
 This works like the following assuming the package `v4l2loopback-dmks` needs to be downgraded.
 
 ```sh
-sudo downgrade v4l2loopback-dmks
+downgrade v4l2loopback-dmks
 ```
 
 Afterward the target version can be selected and the downgrading process will conclude.
@@ -79,6 +117,28 @@ commit list.
 Next to `download` a `.tar.gz` file can be downloaded which includes a `PKGBUILD` file.
 Afterward it needs to be [uncompressed](/wiki/linux/tar.md#uncompressing-a-tar-archive).
 
+### List and Remove Orphaned Packages
+
+Packages that were installed automatically as dependencies may remain on the system after the
+package requiring them has been removed.
+These packages are called orphaned packages and can usually be removed safely.
+
+To list all orphaned packages, run the following command.
+
+```sh
+pacman -Qdt
+```
+
+If the command returns one or more packages, they can be removed together with their unused
+configuration files using the following command.
+
+```sh
+pacman -Rns $(pacman -Qdtq)
+```
+
+It is recommended to review the list of orphaned packages before removing them, as some packages may
+still be desired despite no longer being required as a dependency.
+
 ### Clear Cache
 
 The cache of all packages except the one installed can be deleted by running the following command.
@@ -126,6 +186,89 @@ To enable it search and uncomment the following lines in the file `/etc/pacman.c
 Include = /etc/pacman.d/mirrorlist
 ```
 
+### Searching for Packages by File
+
+Sometimes it is useful to determine which package provides a specific file.
+Before searching the file database it has to be synchronized.
+
+```sh
+sudo pacman -Fy
+```
+
+Afterward, search for one or more file names by replacing `<file>` with the desired file.
+
+```sh
+pacman -F <file>
+```
+
+For example, this can be used to determine which package provides a missing binary, library or
+configuration file.
+
+### Replacing Globally Installed Python Packages
+
+[Python](/wiki/programming_language/python.md) packages installed using
+[pip](/wiki/programming_language/python/pip.md) are not managed by Pacman or Yay.
+Whenever possible, Python packages should instead be installed using a
+[package manager](/wiki/linux/package_manager.md) and the official repositories or the AUR.
+This allows them to be updated together with the rest of the system and avoids conflicts with the
+system package manager.
+
+However, project-specific dependencies should generally be installed inside
+[virtual environments](/wiki/programming_language/python.md#venv-virtual-environments) instead of
+globally.
+
+To begin replacing globally installed Python packages, first list all explicitly installed Python
+packages.
+
+```sh
+pacman -Qet | grep -E '^(python-|python3-)'
+```
+
+These packages are usually candidates to keep, as they are already managed by the system package
+manager.
+
+Next check for Python packages that exist on the file system but are not owned by Pacman.
+The following command searches the global Python installation for unmanaged packages.
+
+```sh
+find /usr/lib/python*/site-packages -maxdepth 1 \
+| while read package; do
+    pacman -Qo "$package" >/dev/null 2>&1 || echo "$package"
+done
+```
+
+Some manually installed packages may instead reside in `/usr/local`.
+These can be listed using the following command.
+
+```sh
+find /usr/local/lib/python*/site-packages -maxdepth 1
+```
+
+For each package that is unmanaged or managed by another source than Pacman or Yay determine the
+package name.
+Then search whether it is available using Pacman or Yay.
+
+```sh
+pacman -Ss <package>
+yay -Ss <package>
+```
+
+If it is, uninstall the package.
+For this pip could be used like shown in the following command.
+Finally, reinstall the package using the Pacman or Yay.
+
+```sh
+yay -S <package>
+```
+
+Note that the packages may not have the same name.
+Often the package has a prepended `python-` for Pacmand and Yay packages, however, this does not
+have to be the case.
+
+Packages that are not available in either the official repositories or the AUR can still be
+installed using tools such as [pip](/wiki/programming_language/python/pip.md) or
+[uv](/wiki/programming_language/python/uv.md).
+
 ### Hooks
 
 Hooks are commands that are run before or after installation of one or more packages.
@@ -333,7 +476,7 @@ To update the package either way the following command can be used.
 `<package name>` should be exchanged for the package that throws the error.
 
 ```sh
-sudo pacman -S --overwrite "*" <package name>
+pacman -S --overwrite "*" <package name>
 ```
 
 ### Error `error: could not open file /var/lib/pacman/sync/core.db: Unrecognized archive format`

wiki/linux/pam.md

@@ -0,0 +1,50 @@
+# PAM
+
+PAM (Pluggable Authentication Modules) is the authentication framework used by most
+[Linux](/wiki/linux.md) distributions.
+It allows authentication methods to be configured independently of the applications using them.
+This makes it possible to integrate passwords,
+[fingerprint readers](/wiki/linux/fingerprint_reader.md), [FIDO2](/wiki/fido2.md) security keys and
+other authentication mechanisms into services such as `sudo`, `login` and
+[display managers](/wiki/linux/display_managers.md).
+
+## Authenticate `sudo` with a FIDO2 Security Key
+
+This section describes how to configure a FIDO2 security key for authentication when running `sudo`.
+The following guide is based on a
+[YouTube video by pixeledi](https://www.youtube.com/watch?v=e5k1ye-_tNs).
+
+First install the required package [PAM U2F](https://github.com/Yubico/pam-u2f) with a
+[package manager](/wiki/linux/package_manager.md) matching your
+[Linux distribution](/wiki/linux.md#distributions).
+It is often packaged under the name `pam-u2f`.
+
+Next create an UDEV rule that allows access to the FIDO2 device.
+
+```sh
+echo 'KERNEL=="hidraw*", SUBSYSTEM=="hidraw", MODE="0664", GROUP="plugdev"' | sudo tee /etc/udev/rules.d/fido2-u2f.rules
+```
+
+Then create the configuration directory and generate the authentication mapping file.
+
+```sh
+mkdir -p ~/.config/fido2-u2f
+cd ~/.config/fido2-u2f
+pamu2fcfg > keys.txt
+```
+
+Open the PAM configuration for `sudo`.
+
+```sh
+sudo vim /etc/pam.d/sudo
+```
+
+Add the following line before all existing `auth` entries.
+Replace `<username>` with the name of the current user.
+
+```txt
+auth            sufficient      pam_u2f.so      cue         authfile=/home/<username>/.config/fido2-u2f/keys.txt
+```
+
+The `cue` option causes PAM to prompt for user presence before requesting a touch on the security
+key.

wiki/linux/systemd.md

@@ -115,6 +115,31 @@ Afterward the logind service has to be restarted
 sudo systemctl restart systemd-logind
 ```
 
+### Limiting Journal Size
+
+The `journalctl` command stores persistent system logs which can grow significantly over time and
+consume disk space.
+
+To display the current disk usage of the journal, run the following command.
+
+```sh
+journalctl --disk-usage
+```
+
+The journal can then be limited to a maximum size by using the following command and replacing
+`<size>` with the desired limit (e.g. `500M`).
+
+```sh
+sudo journalctl --vacuum-size=<size>
+```
+
+Alternatively, logs older than a specified period can be removed by using the following command and
+replacing `<time>` with the desired retention time (e.g. `7d`).
+
+```sh
+sudo journalctl --vacuum-time=<time>
+```
+
 ## Troubleshooting
 
 This section focusses on errors that correspond to the systemd software.

wiki/linux/wayland.md

@@ -3,14 +3,137 @@
 [Wayland](https://wayland.freedesktop.org/) is a replacement for the
 [X11 window system](/wiki/linux/x_window_system.md).
 
+## Setup
+
+For Wayland to work properly the following is needed.
+
+- a Wayland [compositor](#compositors)
+- `wayland`
+- `wayland-protocols`
+- optionally `xwayland` for running [X11](/wiki/linux/x_window_system.md) applications
+- optionally `xdg-desktop-portal` and a suitable backend (e.g. `xdg-desktop-portal-wlr`) for screen
+    sharing and desktop integration
+
+Wayland is then started via the Compositor.
+
+When migrating from X11 to Wayland additional steps may have to be taken.
+Since the start is done via the compositor some settings – especially potential `startx` statements
+in the `.profile` or other files that are run on login (e.g. by [systemd](/wiki/linux/systemd.md))
+to start X11 need to be removed.
+In the correponding places statements to start the Wayland compositor may be put.
+
+## Statusbar
+
+This section focuses on Wayland statusbars.
+
+### Waybar
+
+Waybar is a simple status bar which in most [Linux distributions](/wiki/linux.md#distributions) can
+simply be installed via the [package](/wiki/linux/package_manager.md) `waybar`.
+It can then be started using the `waybar` command after choosing the settings inside
+`.config/waybar`.
+
 ## Compositors
 
 The following is a list of Wayland compositors.
 
-- [dwl](/wiki/linux/suckless.md) is a compositor which is similar to suckless' X11 window manager
+- [dwl](/wiki/linux/suckless.md) is a compositor which is similar to
-  called dwm.
+    [suckless'](/wiki/linux/suckless.md) X11 window manager called dwm.
+    To make dwl start additional software the `-s` flag followed by a [shell](/wiki/linux/shell.md)
+    file can be used.
+    This will run all commands within the file.
+    An example may look similar to `dwl -s ~/.config/wayland/wayland.conf`.
+    For toggling the touchpad the patch called
+    [inputdevicerules](https://codeberg.org/dwl/dwl-patches/src/branch/main/patches/inputdevicerules/inputdevicerules-v0.6.patch)
+    can be used.
 - [mango](https://github.com/mangowm/mango) is a feature-rich Wayland compositor built on dwl.
 
+## Programs
+
+This section contains Wayland-native alternatives to common X11 programs.
+
+Further alternatives can be found in the
+[Sway migration guide](https://github.com/swaywm/sway/wiki/i3-Migration-Guide).
+
+### Background
+
+`swaybg` can be used to set the desktop background.
+
+### Hotkey Daemon
+
+`swhkd` is a Wayland alternative to [sxhkd](/wiki/linux/sxhkd.md).
+
+After installation create the configuration file
+`~/.config/swhkd/swhkdrc` and mark the binary as setuid.
+
+```sh
+sudo chmod u+s $(which swhkd)
+```
+
+The daemon can then be started using
+
+```sh
+swhks && swhkd
+```
+
+### Lock Screen
+
+`swaylock` can be used as a lock screen.
+
+Configuration is stored in `~/.config/swaylock/config`.
+
+A lock screen can then be activated using
+
+```sh
+swaylock
+```
+
+### Idle Daemon
+
+`swayidle` is a Wayland replacement for idle management.
+
+### Screenshots
+
+Wayland screen capture can be achieved using
+
+- `grim` for taking screenshots
+- `slurp` for selecting a region
+- `wl-clipboard` for clipboard integration
+
+Together these can replace tools such as `maim`.
+
+### Display Configuration
+
+`wlr-randr` can be used instead of `xrandr` for wlroots-based compositors.
+
+Many Wayland compositors configure displays automatically, making manual configuration unnecessary
+in many cases.
+
+### Input Events
+
+`wev` is a Wayland alternative to `xev`.
+
+### Window Information
+
+The functionality of `xprop` can be replaced by a combination of `lswt`, `wlrctl`
+(`wlrctl toplevel list`) as well as compositor-specific IPC interfaces.
+
+### Color Temperature
+
+`wlsunset` provides functionality similar to `redshift`.
+
+### Image Viewer
+
+[imv](https://sr.ht/~exec64/imv/) is a Wayland-native [image viewer](/wiki/image.md#viewer) and can
+be used instead of `sxiv`.
+
+### Desktop Managers
+
+There are many [display managers](/wiki/linux/display_managers.md) which support Wayland
+compositors.
+[LightDM](/wiki/linux/lightdm.md) is especially easy to use and the corresponding entry contains a
+[setup section for dwl](/wiki/linux/lightdm.md).
+
 ## Usage
 
 This section addresses the usage of Wayland.
@@ -24,6 +147,45 @@ For this to work the compositor needs to use wlroots.
 wlr-randr
 ```
 
+### Setup Screen Capture
+
+Many Wayland applications access [screen capture](/wiki/screen_capture.md) or
+[sharing](/wiki/screen_sharing.md) through `xdg-desktop-portal`.
+This setup is required by applications such as [Discord](/wiki/discord.md) and [OBS](/wiki/obs.md).
+
+Install the following packages.
+
+- `xdg-desktop-portal-gtk`
+- `xdg-desktop-portal-wlr`
+- `qt5-wayland`
+- `qt6-wayland`
+
+Set the following environment variables.
+
+```sh
+export QT_QPA_PLATFORM=wayland
+export XDG_CURRENT_DESKTOP=wlroots
+```
+
+Import the variables into the user systemd instance during startup.
+
+```sh
+systemctl --user import-environment WAYLAND_DISPLAY XDG_CURRENT_DESKTOP
+dbus-update-activation-environment --systemd WAYLAND_DISPLAY XDG_CURRENT_DESKTOP
+```
+
+Create the file `~/.config/xdg-desktop-portal/portals.conf` with the following contents.
+
+```ini
+[preferred]
+default=gtk
+org.freedesktop.impl.portal.Screenshot=wlr
+org.freedesktop.impl.portal.ScreenCast=wlr
+```
+
+Afterward, restart the system.
+Then screen capture and sharing should be available.
+
 ## Troubleshooting
 
 This section addresses problems that can occur when using Wayland and ways to solve them.

wiki/linux/wayvnc.md

@@ -2,8 +2,10 @@
 
 [wayvnc](https://github.com/any1/wayvnc) is a VNC server for [Linux](/wiki/linux.md) systems using
 [Waylands](/wiki/linux/wayland.md) compositors using wlroots.
-To use wayvnc the system with the server has to be on the same network as the client.
+To use wayvnc the client has to be able to reach the server either directly or through an 
-This is also explained in the [screen sharing entry](/wiki/screen-sharing.md).
+[SSH tunnel](/wiki/linux/openssh.md#port-tunneling).
+It is the default VNC server used on modern [Raspberry Pi OS](/wiki/linux/raspberry_pi.md)
+installations.
 
 ## Setup
 
@@ -25,3 +27,23 @@ The name of the screen can be retrieved by using
 ```sh
 wayvnc <ip> --output=<screen> --render-cursor
 ```
+
+### Binding to an IP Address
+
+By default, wayvnc is reachable on the IP address it is bound to.
+Usually this is `0.0.0.0` and makes the VNC server on all network interfaces.
+
+However, binding to `127.0.0.1` exposes the VNC server only on the loopback interface of
+[SSH tunnels](/wiki/linux/openssh.md).
+This may be useful when using [VNC over SSH](/wiki/vnc.md#vnc-over-ssh).
+
+When using a systemd user service (for example
+`~/.config/systemd/user/wayvnc.service`), the same can be achieved by changing
+the `ExecStart` line to
+
+```ini
+ExecStart=/usr/bin/wayvnc 127.0.0.1
+```
+
+The server can then be accessed remotely using
+[VNC over SSH](/wiki/vnc.md#vnc-over-ssh).