cleaning up unused scripts

.local/bin/tools/compiler

@@ -1,38 +0,0 @@
-#!/bin/sh
-
-# This script will compile or run another finishing operation on a document. I
-# have this script run via vim.
-#
-# Compiles .tex. groff (.mom, .ms), .rmd, .md.  Opens .sent files as sent
-# presentations.  Runs scripts based on extention or shebang
-
-file=$(readlink -f "$1")
-dir=$(dirname "$file")
-base="${file%.*}"
-
-cd "$dir" || exit
-
-textype() { \
-	command="pdflatex"
-	( sed 5q "$file" | grep -i -q 'xelatex' ) && command="xelatex"
-	$command --output-directory="$dir" "$base" &&
-	grep -i addbibresource "$file" >/dev/null &&
-	biber --input-directory "$dir" "$base" &&
-	$command --output-directory="$dir" "$base" &&
-	$command --output-directory="$dir" "$base"
-	}
-
-case "$file" in
-	*\.ms) refer -PS -e "$file" | groff -me -ms -kept -T pdf > "$base".pdf ;;
-	*\.mom) refer -PS -e "$file" | groff -mom -kept -T pdf > "$base".pdf ;;
-	*\.[0-9]) refer -PS -e "$file" | groff -mandoc -T pdf > "$base".pdf ;;
-	*\.rmd) echo "require(rmarkdown); render('$file')" | R -q --vanilla ;;
-	*\.tex) textype "$file" ;;
-	*\.md) pandoc "$file" --pdf-engine=xelatex -o "$base".pdf ;;
-	*config.h) sudo make install ;;
-        *\.c) cc "$file" -o "$base" && "$base" ;;
-	*\.py) python "$file" ;;
-	*\.go) go run "$file" ;;
-	*\.sent) setsid sent "$file" 2>/dev/null & ;;
-	*) sed 1q "$file" | grep "^#!/" | sed "s/^#!//" | xargs -r -I % "$file" ;;
-esac

.local/bin/tools/ext

@@ -1 +0,0 @@
-extract

.local/bin/tools/extract

@@ -1,41 +0,0 @@
-#!/bin/sh
-# A general, all-purpose extraction script.
-#
-# Default behavior: Extract archive into new directory
-# Behavior with `-c` option: Extract contents into current directory
-
-while getopts "hc" o; do case "${o}" in
-	c) extracthere="True" ;;
-	*) printf "Options:\\n   -c: Extract archive into current directory rather than a new one.\\n" && exit ;;
-esac done
-
-if [ -z "$extracthere" ]; then
-	archive="$(readlink -f "$*")" &&
-	directory="$(echo "$archive" | sed 's/\.[^\/.]*$//')" &&
-	mkdir -p "$directory" &&
-	cd "$directory" || exit
-else
-	archive="$(readlink -f "$(echo "$*" | cut -d' ' -f2)")"
-fi
-
-[ "$archive" = "" ] && printf "Give archive to extract as argument.\\n" && exit
-
-if [ -f "$archive" ] ; then
-	case "$archive" in
-		*.tar.bz2|*.tar.xz|*.tbz2) tar xvjf "$archive" ;;
-		*.tar.gz|*.tgz) tar xvzf "$archive" ;;
-		*.lzma) unlzma "$archive" ;;
-		*.bz2) bunzip2 "$archive" ;;
-		*.rar) unrar x -ad "$archive" ;;
-		*.gz) gunzip "$archive" ;;
-		*.tar) tar xvf "$archive" ;;
-		*.zip) unzip "$archive" ;;
-		*.Z) uncompress "$archive" ;;
-		*.7z) 7z x "$archive" ;;
-		*.xz) unxz "$archive" ;;
-		*.exe) cabextract "$archive" ;;
-		*) printf "extract: '%s' - unknown archive method\\n" "$archive" ;;
-	esac
-else
-	printf "File \"%s\" not found.\\n" "$archive"
-fi

.local/bin/tools/getbib

@@ -1,14 +0,0 @@
-#!/bin/sh
-[ -z "$1" ] && echo "Give either a pdf file or a DOI as an argument." && exit
-
-if [ -f "$1" ]; then
-	# Try to get DOI from pdfinfo or pdftotext output.
-	doi=$(pdfinfo "$1" | grep -io "doi:.*") ||
-	doi=$(pdftotext "$1" 2>/dev/null - | grep -io "doi:.*" -m 1) ||
-	exit 1
-else
-	doi="$1"
-fi
-
-# Check crossref.org for the bib citation.
-curl -s "http://api.crossref.org/works/$doi/transform/application/x-bibtex" -w "\\n"

.local/bin/tools/getkeys

@@ -1,4 +0,0 @@
-#!/bin/sh
-cat ~/.config/getkeys/"$1" 2>/dev/null && exit
-echo "Run command with one of the following arguments for info about that program:"
-ls ~/.config/getkeys

.local/bin/tools/lmc

@@ -7,35 +7,16 @@ case "$1" in
 	u*) pulsemixer --change-volume +"$num" ;;
 	d*) pulsemixer --change-volume -"$num" ;;
 	m*) pulsemixer --toggle-mute ;;
-	truemute) pulsemixer --mute ;;
-	play) mpc play ;;
-	n*) mpc next ;;
-	prev) mpc prev ;;
-	t*) mpc toggle ;;
-	p*) mpc pause ; pauseallmpv ;;
-	f*) mpc seek +"$num" ;;
-	b*) mpc seek -"$num" ;;
-	r*) mpc seek 0% ;;
 	*) cat << EOF
-lmc: cli music interface for mpd and pulse for those with divine intellect too
-grand to remember the mpc/pamixer commands.
+lmc: cli music interface for pulse for those with divine intellect too
+grand to remember the pamixer commands.
 
 Allowed options:
   up NUM	Increase volume (2 secs default)
   down NUM	Decrease volume (2 secs default)
   mute		Toggle mute
-  truemute	Mute
-  next		Next track
-  prev		Previous track
-  toggle	Toggle pause
-  truepause	Pause
-  foward NUM	Seek foward in song (2 secs default)
-  back NUM	Seek back in song (2 secs default)
-  restart	Restart current song
   all else	Print this message
 
-All of these commands, except for \`truemute\`, \`prev\` and \`play\` can be truncated,
-i.e. \`lmc r\` for \`lmc restart\`.
 EOF
 esac
 

.local/bin/tools/opout

@@ -1,11 +0,0 @@
-#!/bin/sh
-# opout: "open output": A general handler for opening a file's intended output.
-# I find this useful especially running from vim.
-
-basename="$(echo "$1" | sed 's/\.[^\/.]*$//')"
-
-case "$1" in
-	*.tex|*.md|*.rmd|*.ms|*.me|*.mom) setsid "$READER" "$basename".pdf >/dev/null 2>&1 & ;;
-	*.html) setsid "$BROWSER" --new-window "$basename".html >/dev/null 2>&1 & ;;
-	*.sent) setsid sent "$1" >/dev/null 2>&1 & ;;
-esac

.local/bin/tools/pauseallmpv

@@ -1,4 +0,0 @@
-#!/bin/sh
-for i in $(ls /tmp/mpvsoc*); do
-	echo '{ "command": ["set_property", "pause", true] }' | socat - $i;
-done

.local/bin/tools/podentr

@@ -1,6 +0,0 @@
-#!/bin/sh
-# entr command to run `queueandnotify` when newsboat queue is changed
-
-[ "$(pgrep -x $(basename $0) | wc -l)" -gt 2 ] && exit
-
-echo ~/.local/share/newsboat/queue | entr -p queueandnotify 2>/dev/null

.local/bin/tools/prompt

@@ -0,0 +1,7 @@
+#!/bin/sh
+# A dmenu binary prompt script.
+# Gives a dmenu prompt labeled with $1 to perform command $2.
+# For example:
+# `./prompt "Do you want to shutdown?" "shutdown -h now"`
+
+[ "$(printf "No\\nYes" | dmenu -i -fn Monospace-15 -p "$1" -nb darkred -sb red -sf white -nf gray )" = "Yes" ] && $2

.local/bin/tools/qndl

@@ -1,11 +0,0 @@
-#!/bin/sh
-# $1 is a url; $2 is a command
-[ -z "$1" ] && exit
-base="$(basename "$1")"
-notify-send "⏳ Queuing $base..."
-cmd="$2"
-[ -z "$cmd" ] && cmd="youtube-dl --add-metadata"
-idnum="$(tsp $cmd "$1")"
-realname="$(echo "$base" | sed "s/?\(source\|dest\).*//;s/%20/ /g")"
-tsp -D "$idnum" mv "$base" "$realname"
-tsp -D "$idnum" notify-send "👍 $realname done."

.local/bin/tools/queueandnotify

@@ -1,13 +0,0 @@
-#!/bin/sh
-# Podboat sucks. This script replaces it.
-# It reads the newsboat queue, queuing downloads with taskspooler.
-# It also removes the junk from extentions.
-queuefile="$HOME/.local/share/newsboat/queue"
-
-while read -r line; do
-	[ -z "$line" ] && continue
-	url="$(echo "$line" | awk '{print $1}')"
-	qndl "$url" "curl -LO"
-done < "$queuefile"
-
-echo > "$queuefile"

.local/bin/tools/remaps

@@ -1,4 +0,0 @@
-#!/bin/sh
-# This script is called by i3 on startup to remap keys.
-# Increase key speed via a rate change
-xset r rate 300 50

.local/bin/tools/rotdir

@@ -1,4 +0,0 @@
-#!/bin/sh
-[ -z "$1" ] && echo "usage: rotdir regex 2>&1" && exit 1
-base="$(basename $1)"
- ls "$PWD" | awk "BEGIN { lines = \"\"; m = 0; } /^$base$/ { m = 1; } { if (!m) { if (lines) { lines = lines\"\n\"; } lines = lines\"\"\$0; } else { print \$0; } } END { print lines; }"

.local/bin/tools/rssadd

@@ -1,9 +0,0 @@
-#!/bin/sh
-! echo "$1" | grep "https*://\S\+\.[A-Za-z]\+\S*" >/dev/null &&
-	notify-send "That doesn't look like a full URL." && exit
-RSSFILE="$HOME/.config/newsboat/urls"
-if awk '{print $1}' "$RSSFILE" | grep "^$1$" >/dev/null; then
-	notify-send "You already have this RSS feed."
-else
-	echo "$1" >> "$RSSFILE" && notify-send "RSS feed added."
-fi

.local/bin/tools/shortcuts

@@ -1,26 +0,0 @@
-#!/bin/bash
-# Output locations. Unactivated progs should go to /dev/null.
-shell_shortcuts="$HOME/.config/shortcutrc"
-ranger_shortcuts="/dev/null"
-qute_shortcuts="/dev/null"
-fish_shortcuts="/dev/null"
-vifm_shortcuts="$HOME/.config/vifm/vifmshortcuts"
-
-# Remove, prepare files
-rm -f "$ranger_shortcuts" "$qute_shortcuts" 2>/dev/null
-printf "# vim: filetype=sh\\n" > "$fish_shortcuts"
-printf "# vim: filetype=sh\\nalias " > "$shell_shortcuts"
-printf "\" vim: filetype=vim\\n" > "$vifm_shortcuts"
-
-# Format the `bmdirs` file in the correct syntax and sent it to all three configs.
-sed "s/\s*#.*$//;/^\s*$/d" "$HOME/.config/bmdirs" | tee >(awk '{print $1"=\"cd "$2" && ls -a\" \\"}' >> "$shell_shortcuts") \
-	>(awk '{print "abbr", $1, "\"cd " $2 "; and ls -a\""}' >> "$fish_shortcuts") \
-	>(awk '{print "map g" $1, ":cd", $2 "<CR>\nmap t" $1, "<tab>:cd", $2 "<CR><tab>\nmap M" $1, "<tab>:cd", $2 "<CR><tab>:mo<CR>\nmap Y" $1, "<tab>:cd", $2 "<CR><tab>:co<CR>" }' >> "$vifm_shortcuts") \
-	>(awk '{print "config.bind(\";"$1"\", \"set downloads.location.directory "$2" ;; hint links download\")"}' >> "$qute_shortcuts") \
-	| awk '{print "map g"$1" cd "$2"\nmap t"$1" tab_new "$2"\nmap m"$1" shell mv -v %s "$2"\nmap Y"$1" shell cp -rv %s "$2}' >> "$ranger_shortcuts"
-
-# Format the `configs` file in the correct syntax and sent it to both configs.
-sed "s/\s*#.*$//;/^\s*$/d"  "$HOME/.config/bmfiles" | tee >(awk '{print $1"=\"$EDITOR "$2"\" \\"}' >> "$shell_shortcuts") \
-	>(awk '{print "abbr", $1, "\"$EDITOR "$2"\""}' >> "$fish_shortcuts") \
-	>(awk '{print "map", $1, ":e", $2 "<CR>" }' >> "$vifm_shortcuts") \
-	| awk '{print "map "$1" shell $EDITOR "$2}' >> "$ranger_shortcuts"

.local/bin/tools/texclear

@@ -1,14 +0,0 @@
-#!/bin/sh
-
-# Clears the build files of a LaTeX/XeLaTeX build.
-# I have vim run this file whenever I exit a .tex file.
-
-case "$1" in
-	*.tex)
-	file=$(readlink -f "$1")
-	dir=$(dirname "$file")
-	base="${file%.*}"
-	find "$dir"  -maxdepth 1 -type f -regextype gnu-awk -regex "^$base\\.(4tc|xref|tmp|pyc|pyo|fls|vrb|fdb_latexmk|bak|swp|aux|log|synctex\\(busy\\)|lof|lot|maf|idx|mtc|mtc0|nav|out|snm|toc|bcf|run\\.xml|synctex\\.gz|blg|bbl)" -delete ;;
-	*) printf "Give .tex file as argument.\\n" ;;
-esac
-

.local/bin/tools/toggletouchpad

@@ -0,0 +1,4 @@
+#!/bin/sh
+# Toggle touchpad. Requires xf86-input-synaptics.
+(synclient | grep "TouchpadOff.*1" && synclient TouchpadOff=0)>/dev/null && notify-send "TouchPad reactivated." && exit
+synclient TouchpadOff=1 && notify-send "TouchPad deactivated."

.local/bin/tools/transadd

@@ -1,9 +0,0 @@
-#!/bin/sh
-
-# Mimeapp script for adding torrent to transmission-daemon, but will also start the daemon first if not running.
-
-# transmission-daemon sometimes fails to take remote requests in its first moments.
-
-pgrep -x transmission-da || (transmission-daemon && notify-send "Starting transmission daemon..." && sleep 3 && pkill -RTMIN+7 i3blocks)
-
-transmission-remote -a "$@" && notify-send "🔽 Torrent added."

.local/bin/tools/vifmimg

@@ -1,13 +0,0 @@
-#!/usr/bin/env bash
-[ -z "$FIFO_UEBERZUG" ] && exit
-
-readonly ID_PREVIEW="preview"
-
-if [ "$1" = "draw" ]; then
-	declare -p -A cmd=([action]=add [identifier]="$ID_PREVIEW" [x]="$2" [y]="$3" [max_width]="$4" [max_height]="$5" [path]="${PWD}/$6") > "$FIFO_UEBERZUG"
-elif [ "$1" = "videopreview" ]; then
- 	[ ! -f "/tmp/$6.png" ] && ffmpegthumbnailer -i "${PWD}/$6" -o "/tmp/$6.png" -s 0 -q 10 &&
-	declare -p -A cmd=([action]=add [identifier]="$ID_PREVIEW" [x]="$2" [y]="$3" [max_width]="$4" [max_height]="$5" [path]="/tmp/$6.png") > "$FIFO_UEBERZUG"
-else
-	declare -p -A cmd=([action]=remove [identifier]="$ID_PREVIEW") > "$FIFO_UEBERZUG"
-fi

.local/bin/tools/vu

@@ -1,15 +0,0 @@
-#!/usr/bin/env sh
-export FIFO_UEBERZUG="/tmp/vifm-ueberzug-${PPID}"
-
-cleanup() {
-    rm "$FIFO_UEBERZUG" 2>/dev/null
-    pkill -P $$ 2>/dev/null
-}
-
-rm "$FIFO_UEBERZUG" 2>/dev/null
-mkfifo "$FIFO_UEBERZUG"
-trap cleanup EXIT
-tail --follow "$FIFO_UEBERZUG" | ueberzug layer --silent --parser bash &
-
-vifm
-cleanup