KohakuHub: Added and linked into git (general)

Added a section on problems that occur for loopback devices in combination with EasyEffects default configuration.

wiki/*arr.md

@@ -1,30 +1,25 @@
 # \*ARR
 
-\*ARR application is a class of applications made as personal video recorders in
+\*ARR application is a class of applications made as personal video recorders in the usenet and
-the usenet and [BitTorrent](/wiki/bittorrent.md) domain.
+[BitTorrent](/wiki/bittorrent.md) domain.
-These applications include but are not limited to
+These applications include but are not limited to [Sonarr](https://github.com/Sonarr/Sonarr) for
-[Sonarr](https://github.com/Sonarr/Sonarr) for
+[TV shows](/wiki/video.md), [Radarr](https://github.com/Radarr/Radarr) for [movies](/wiki/video.md)
-[TV shows](/wiki/video.md),
+and [Lidarr](https://github.com/Lidarr/Lidarr) for [music](/wiki/audio.md).
-[Radarr](https://github.com/Radarr/Radarr) for
-[movies](/wiki/video.md) and
-[Lidarr](https://github.com/Lidarr/Lidarr) for [music](/wiki/audio.md).
 
 ## Setup
 
-For the different applications there are different [Docker](/wiki/docker.md)
+For the different applications there are different [Docker](/wiki/docker.md) containers for setup.
-containers for setup:
+These are [Linuxservers Sonarr image](/wiki/docker/linuxserver_-_sonarr.md),
-[Linuxservers Sonarr image](/wiki/docker/linuxserver_-_sonarr.md),
 [Linuxservers Radarr image](/wiki/docker/linuxserver_-_radarr.md) and
 [Linuxservers Lidarr image](/wiki/docker/linuxserver_-_lidarr.md).
 
 ### Initial Configuration
 
 For the initial configuration navigate to `System` and `Status`.
-Afterwards check if there are any messages.
+Afterward check if there are any messages.
 There are probably a few steps that need to be taken to complete the setup.
 Set the `Download Clients` under `Settings`.
-For this an instance of a [BitTorrent Client](/wiki/bittorrent.md#clients) can
+For this an instance of a [BitTorrent Client](/wiki/bittorrent.md#clients) can be used.
-be used.
 Next an indexer needs to be added.
 For this [Jackett](/wiki/jackett.md) can be used.
 A guide to add Jackett indexers is featured in

wiki/airsonic-advanced.md

@@ -2,14 +2,14 @@
 
 [Airsonic-Advanced](https://github.com/airsonic-advanced/airsonic-advanced) is
 a free and open-source personal media streamer used for
-[music, podcasts and audiobooks](./audio.md).
+[music, podcasts and audiobooks](/wiki/audio.md).
-It is a more modern implementation of [Airsonic](./airsonic.md) which in turn
+It is a more modern implementation of [Airsonic](/wiki/airsonic.md) which in turn
-is a fork of [Subsonic](./subsonic.md).
+is a fork of [Subsonic](/wiki/subsonic.md).
 
 ## Setup
 
 The software can be setup via docker with the
-[linuxserver image](./docker/linuxserver_-_airsonic-advanced.md).
+[linuxserver image](/wiki/docker/linuxserver_-_airsonic-advanced.md).
 
 ### Initial configuration
 
@@ -36,7 +36,7 @@ Log in with the clients now works correctly.
 
 It is possible to use many different clients because the server is compatible
 with all the Subsonic clients.
-These can be found in the [Subsonic entry](./subsonic.md#clients) and the [Airsonic
+These can be found in the [Subsonic entry](/wiki/subsonic.md#clients) and the [Airsonic
 entry](/wiki/airsonic.md#clients).
 
 ## Scrobbling with Last.fm

wiki/airsonic.md

@@ -1,22 +1,21 @@
 # Airsonic
 
-[Airsonic](https://github.com/airsonic/airsonic) is a free and open-source
+[Airsonic](https://github.com/airsonic/airsonic) is a free and open-source personal media streamer
-personal media streamer used for [music,podcasts and audiobooks](./audio.md).
+used for [music, podcasts and audiobooks](/wiki/audio.md).
-It is a fork of [Subsonic](./subsonic.md).
+It is a fork of [Subsonic](/wiki/subsonic.md).
 Airsonic is not maintained anymore and therefore deprecated.
-A more modern implementation of it is
+A more modern implementation of it is [Airsonic-Advanced](/wiki/airsonic-advanced.md).
-[Airsonic-Advanced](./airsonic-advanced.md).
 
 ## Setup
 
 The software can be setup via [Docker](/wiki/docker.md) with the
-[linuxserver image](./docker/linuxserver_-_airsonic.md).
+[linuxserver image](/wiki/docker/linuxserver_-_airsonic.md).
 
 ### Clients
 
-It is possible to use many different clients because the server is compatible
+It is possible to use many different clients because the server is compatible with all the Subsonic
-with all the Subsonic clients.
+clients.
-These can be found in the [Subsonic entry](./subsonic.md#clients).
+These can be found in the [Subsonic entry](/wiki/subsonic.md#clients).
 
-Additionally to these clients there is an improved web user interface made by tamland called
+Additionally, to these clients there is an improved web user interface made by tamland called
-[airsonic-refix](https://github.com/tamland/airsonic-refix).
+[Airsonic (refix) UI](https://github.com/tamland/airsonic-refix).

wiki/android.md

@@ -11,10 +11,10 @@ A free and open-source alternative to it is [F-Droid](/wiki/android/f-droid.md)
 open-source software.
 
 A list of open-source software options is also available on Alberto Mosconis
-[Github](/wiki/git_%28general%29.md#server-with-web-interface) repository
+[Github](/wiki/git_%28general%29.md#server) repository
 [foss apps](https://github.com/albertomosconi/foss-apps/tree/main).
 
-Additionally open-source apps can be installed from source using
+Additionally, open-source apps can be installed from source using
 [Obtainium](https://github.com/ImranR98/Obtainium).
 
 ### Useful Applications

wiki/android/droidcam.md

@@ -29,6 +29,6 @@ program.
 After pressing `Connect` the link will be established.
 The [video feed](/wiki/webcam.md) can then be used in other programs such as Discord or
 [Matrix](/wiki/matrix.md).
-Additionally it can be piped into [OBS](/wiki/obs.md) to edit it more or create a scene.
+Additionally, it can be piped into [OBS](/wiki/obs.md) to edit it more or create a scene.
 Despite the option the separate app [DroidCam OBS](https://www.dev47apps.com/obs/) is not
 necessarily needed.

wiki/android/fairemail.md

@@ -7,7 +7,7 @@
 
 On [Android](/wiki/android.md) FairEmail is available on [F-Droid](/wiki/android/f-droid.md) in a
 package called [FairEmail](https://f-droid.org/en/packages/eu.faircode.email/).
-Additionally it is available on the[Google Play store](/wiki/android.md#app-store) in a package
+Additionally, it is available on the[Google Play store](/wiki/android.md#app-store) in a package
 called [FairEmail](https://play.google.com/store/apps/details?id=eu.faircode.email&hl=de).
 
 ## Usage
@@ -28,6 +28,6 @@ After this is done outgoing mails can be encrypted by signed or encrypted by sel
 
 Decryption can be done by clicking on the padlock when inside an email that is encrypted.
 
-Additionally in the settings under `Encryption` the signing (`Sign by default`), encryption
+Additionally, in the settings under `Encryption` the signing (`Sign by default`), encryption
 (`Sign and encrypt by default`), decryption (`Auomatically decrypt messages`) and validation
 (`Automatically verify signed messages`) can be set to occurr automatically.

wiki/android/gadgetbridge.md

@@ -19,25 +19,25 @@ Gadgetbridge.
 ### Configuration of Devices
 
 Devices can be added to Gadgetbridge by clicking on the `+` in the main screen.
-Afterwards the device can simply be paired.
+Afterward the device can simply be paired.
 
 A special pairing procedure is needed for Amazfit or Xiaomi devices.
 The following describes the steps that need to be done.
 
 - Download the
-  [Zepp app](https://play.google.com/store/apps/details?id=com.huami.watch.hmwatchmanager).
+    [Zepp app](https://play.google.com/store/apps/details?id=com.huami.watch.hmwatchmanager).
 - Pair the device with the Zepp app.
 - Use [huami-token](https://codeberg.org/argrento/huami-token/) to obtain the auth key by using the
-  command `python3 huami_token.py --method amazfit --email my_email --password password --bt_keys`
+    command `python3 huami_token.py --method amazfit --email my_email --password password --bt_keys`
-  with adjusted values.
+    with adjusted values.
 - Uninstall the Zepp app and unpair the device from inside the bluetooth settings of the smart
-  phone.
+    phone.
 - Inside the Gadgetbridge app click on the `+`, find the device and enter the auth key by long
-  pressing on the devices name.
+    pressing on the devices name.
-  Afterwards navigate back to the scanning list.
+    Afterward navigate back to the scanning list.
 - Pair the device by clicking on the device name.
 
-Afterwards the device will be paired and connected.
+Afterward the device will be paired and connected.
 
 ### Add Weather Function
 
@@ -49,7 +49,7 @@ An example for this is the [Breezy Weather app](https://github.com/breezy-weathe
 which is available on the F-Droid store.
 Install and configure it to your needs.
 Then check the Gadgetbridge option insdie the Breezy Weather app.
-Afterwards the weather function will be working.
+Afterward the weather function will be working.
 
 In the past an application named
 [Weather Notification](https://f-droid.org/en/packages/ru.gelin.android.weather.notification/)

wiki/android/ip_webcam.md

@@ -28,7 +28,7 @@ An example link will look like the following.
 http://192.168.178.66:8080
 ```
 
-Additionally it can be piped into [OBS](/wiki/obs.md) to edit it or into
+Additionally, it can be piped into [OBS](/wiki/obs.md) to edit it or into
 [ffmpeg](/wiki/linux/ffmpeg.md) on [Linux](/wiki/linux.md) systems to create a virtual webcam
 device as explained in the
 [ffmpeg entry](/wiki/linux/ffmpeg.md#create-a-virtual-camera-using-an-ip-video-stream).

wiki/android/tasker.md

@@ -9,7 +9,7 @@ On [Android](/wiki/android.md) /name/ is available on the
 [Google Play store](/wiki/android.md#app-store) in a package called
 [Tasker](https://play.google.com/store/apps/details?id=net.dinglisch.android.taskerm).
 
-Additionally the installation of [Tasker Settings](https://github.com/joaomgcd/TaskerSettings) is
+Additionally, the installation of [Tasker Settings](https://github.com/joaomgcd/TaskerSettings) is
 recommended.
 Please note that on the [Github releases page](https://github.com/joaomgcd/TaskerSettings/releases)
 there are different versions to be used with Xiaomi-phones.

wiki/anki.md

@@ -39,7 +39,7 @@ This guide assumes the default Anki client is used.
 To change this select `Browse` and then navigate to the `Note Type` the deck to add backwards cards
 uses.
 Right click the note type and select `Cards`.
-Afterwards the cards for backwards learning can be added by `Options` and `Add Card Types...`.
+Afterward the cards for backwards learning can be added by `Options` and `Add Card Types...`.
 You can confirm the fields have been setup correctly by clicking through the card types and
 verifying it.
 

wiki/audio.md

@@ -47,7 +47,7 @@ Following is a list of often used formats:
 
 - wav is an uncompressed lossless format
 - aiff is an uncompressed lossless format
-- [flac](./flac_(codec).md) is a compressed lossless format
+- [flac](/wiki/flac_%28codec%29.md) is a compressed lossless format
 - alac is a compressed lossless format
 - ape is a compressed lossless format
 - mp3 is a compressed lossy codec
@@ -57,13 +57,11 @@ Following is a list of often used formats:
 - dts is a compressed lossy codec usually found in DVDs
 
 Music files can either be encoded lossy or lossless.
-Lossless formats can be converted from and to each other without loosing
+Lossless formats can be converted from and to each other without loosing information.
-information.
+Lossless formats can also be converted to lossy formats to make the files smaller and save space.
-Lossless formats can also be converted to lossy formats to make the files
-smaller and save space.
 Files should not be converted to lossy formats more than once.
-Additionally lossy formats should not be converted to lossless formats as it
+Additionally, lossy formats should not be converted to lossless formats as it increases the file
-increases the file size without adding any audio information.
+size without adding any audio information.
 These not recommended conversions are called bad conversions.
 
 ### Cue Files
@@ -74,7 +72,7 @@ These can be created when the
 Usually this appears together with a single file for the whole CD.
 The audio file can then be split according to the `.cue` file.
 For splitting of `.flac` files on a Linux system check the
-[a flac (package) entry](/wiki/linux/flac_(package).md#splitting-flac-file-according-to-cue-file)
+[a flac (package) entry](/wiki/linux/flac_%28package%29.md#splitting-flac-file-according-to-cue-file)
 for further informations.
 
 ## Media Software
@@ -96,30 +94,30 @@ Digital Audio Workstations - short DAWs - is an application that can be used to
 produce audio files.
 
 - [LMMS](https://lmms.io/) is a free and cross-platform DAW that is highly compatible with
-  [Linux-based systems](/wiki/linux.md).
+    [Linux-based systems](/wiki/linux.md).
 - [Audacity](https://www.audacityteam.org/) is an open source and cross-platform software to record
-  and edit audio.
+    and edit audio.
 
 ### Software for Music/Podcasts/Audiobooks
 
 The following is a list of server software, that is featured in this wiki.
 The corresponding client software is handled in the server softwares wiki entry.
 
-- [Subsonic](./subsonic.md) is a media streamer for music, podcasts and
+- [Subsonic](/wiki/subsonic.md) is a media streamer for music, podcasts and   
-  audiobooks.
+    audiobooks.
-  Subsonic is self-hostable.
+    Subsonic is self-hostable.
-  Subsonic that can be dockerized and has a web-interface aswell as several
+    Subsonic that can be dockerized and has a web-interface aswell as several
-  clients that can be used.
+    clients that can be used.
-  There are also the free and open-source implementations - that feature all the
+    There are also the free and open-source implementations - that feature all the
-  same features and using its API - named [Airsonic](./airsonic.md) (no longer
+    same features and using its API - named [Airsonic](/wiki/airsonic.md) (no longer
-  maintained) and its inofficial successor [Airsonic-advanced](./airsonic.md).
+    maintained) and its inofficial successor [Airsonic-advanced](/wiki/airsonic.md).
 
 ### Software for Podcasts
 
-- [Podgrab](./podgrab.md) is a free and open-source podcatcher that can also be
+- [Podgrab](/wiki/podgrab.md) is a free and open-source podcatcher that can also be
-  used to listen to them.
+    used to listen to them.
-  It is self-hostable and can be dockerized.
+    It is self-hostable and can be dockerized.
-  It has a web-interface and does not feature client software.
+    It has a web-interface and does not feature client software.
 
 #### Obtaining Audio Files from Different Services
 
@@ -169,14 +167,14 @@ You can convert your CDs to files on your computer.
 This way you don't have to search for your CDs all the time.
 
 - [Exact Audio Copy](https://www.exactaudiocopy.de) for windows can rip music
-  and automatically tag it with the help of a list of databases.
+    and automatically tag it with the help of a list of databases.
 - [fre:ac](https://freac.org/downloads-mainmenu-33) is a free cross-platform
-  audio converter and CD ripper with support for various popular formats.
+    audio converter and CD ripper with support for various popular formats.
-- [metaflac](./linux/flac_(package).md) for linux is a programm
+- [metaflac](/wiki/linux/flac_%28package%29.md) for [Linux](/wiki/linux.md) is a program to edit
-  to edit the tags of [flac](./flac_(codec).md) files from the command line.
+    the tags of [flac](/wiki/flac_%28codec%29.md) files from the command line.
-  It is bundled in the `flac` package for debian and arch based systems.
+    It is bundled in the `flac` package for [Debian](/wiki/linux/debian.md) and arch based systems.
-- [MusicBrainz Picard](./picard.md) for linux is a
+- [MusicBrainz Picard](/wiki/picard.md) for [Linux](/wiki/linux.md) is a graphical user interface
-  graphical user interface for tagging files of many different formats.
+    for tagging files of many different formats.
 
 ### Analysis of Different Versions of an Album
 
@@ -186,31 +184,34 @@ It shows dynamic range scorings of each version.
 
 ### Get Additional Data to an Album/Single
 
-If additional information for an album is needed, visit
+If additional information for an album is needed, visit [Discogs](https://www.discogs.com).
-[Discogs](https://www.discogs.com).
+Discogs has tracklists, dates and more information to nearly all versions of albums and singles.
-Discogs has tracklists, dates and more information to nearly all versions of
-albums and singles.
 
 ### Naming Convention
 
-It is suggested to place the audio files in a directory named after the album they
+It is suggested to place the audio files in a directory named after the album they belong to.
-belong to.
 These album directories are placed in directories named after the album artist.
-Files can be named in the following scheme:
+Files can be named in the following scheme.
 
 - music: `[<discnumber>.]<tracknumber>._<artist>_-_<title>`
 - audiobooks: `[<discnumber>.]<tracknumber>._<artist>_-_<album>_<tracknumber>`
 
-### Scoring Music
+### Sheet Music
 
-Scoring music has moved more and more into the computer realm.
+Music has moved more and more into the computer realm.
-An easy and intuitive software that can be used for this is
+An easy and intuitive software that can be used for this is [MuseScore.org](https://musescore.org/)
-[MuseScore.org](https://musescore.org/).
+which features notating music aswell as a wide catalogue of available sheet music.
 MuseScore is free and open-source and is cross-platform.
 On [Linux based systems](/wiki/linux.md) it is available on most distributions via the `musescore`
 package or their [website](https://musescore.org/download) and can be run with the command `mscore`.
 For Windows visit the [download section of the MuseScore website](https://musescore.org/download).
 
+Another option for music notation is [LilyPond](https://lilypond.org/).
+It is free software and also features
+[a plugin](https://github.com/martineausimon/nvim-lilypond-suite) for [NeoVIM](/wiki/linux/vim.md).
+From the `.ly` files typical for LilyPond `.midi` files can automatically be generated.
+These can in turn be played using [FluidSynth](https://www.fluidsynth.org/).
+
 ### Getting Metadata
 
 Using [MediaInfo](https://github.com/MediaArea/MediaInfo) metadata of a file can be obtained.

wiki/betterdiscord.md

@@ -18,7 +18,7 @@ converted to BetterDiscord.
 betterdiscordctl install
 ```
 
-Afterwards BetterDiscord can be kept up to date with the following command.
+Afterward BetterDiscord can be kept up to date with the following command.
 
 ```sh
 betterdiscordctl self-upgrade

wiki/bibliogram.md

@@ -1,21 +1,21 @@
 # Bibliogram
 
-[Bibliogram](https://sr.ht/~cadence/bibliogram/) is an alternative frontend for
+[Bibliogram](https://sr.ht/~cadence/bibliogram/) is an alternative frontend for Instagram.
-Instagram.
 Please note that Bibliogram is now officially discontinued according to
-[the developer](https://cadence.moe/blog/2022-09-01-discontinuing-bibliogram)
+[the developer](https://cadence.moe/blog/2022-09-01-discontinuing-bibliogram) as it is not possible
-as it is not possible anymore to show user pages but only single posts.
+anymore to show user pages but only single posts.
 
 ## Setup
 
 The software can be setup via [Docker](/wiki/docker.md) with the
-[cloudrac3r image](./docker/cloudrac3r_-_bibliogram.md).
+[cloudrac3r image](/wiki/docker/cloudrac3r_-_bibliogram.md).
 
 ## Automatic redirect from Instagram
 
-There are various add-ons to redirect from Instagram links to your (or a public)
+There are various add-ons to redirect from Instagram links to your (or a public) Bibliogram
-Bibliogram instance.
+instance.
 For Firefox for example there is
 [privacy redirect](https://addons.mozilla.org/en-US/firefox/addon/privacy-redirect/).
 For [Android](/wiki/android.md) there is
-[the UntrackMe app](https://framagit.org/tom79/nitterizeme) (available at [f-droid](./android/f-droid.md)).
+[the UntrackMe app](https://framagit.org/tom79/nitterizeme) (available at
+[f-droid](/wiki/android/f-droid.md)).

wiki/bind.md

@@ -1,12 +1,11 @@
 # Bind
 
-[Bind](https://www.isc.org/bind/) is an open-source software suite for
+[Bind](https://www.isc.org/bind/) is an open-source software suite for interacting with the
-interacting with the [DNS](./dns.md).
+[DNS](/wiki/dns.md).
 
 ## Setup
 
-The software can be setup via docker with the
+The software can be setup via docker with the [ventz image](/wiki/docker/ventz_-_bind.md).
-[ventz image](./docker/ventz_-_bind.md).
 
 ## Usage
 
@@ -20,8 +19,7 @@ Look into the file `/etc/bind/named.conf.options`.
 Change it to something like the following lines.
 Note that `192.168.178.0/24` is the subnet that is used mainly in this example.
 Only queries from within it will be handled.
-The forwarders `8.8.8.8` and `8.8.4.4` can be changed according to the specific
+The forwarders `8.8.8.8` and `8.8.4.4` can be changed according to the specific needs.
-needs.
 
 ```txt
 acl "trusted" {
@@ -53,8 +51,7 @@ options {
 ### Configure local domains
 
 This section explains how to add local domains for local systems.
-It is explicitly compatible with the
+It is explicitly compatible with the [previous section](#setup-a-local-dns-server-with-forwarding).
-[previous section](#setup-a-local-dns-server-with-forwarding).
 Locate the `named.conf.local` file in the `/etc/bind` directory.
 Add the forward zone first.
 Substitute `<domain>` and `<tld>` to your wishes.
@@ -94,14 +91,13 @@ $TTL 1D
 ```
 
 
-To make the server you operate on the nameserver select a subdomain for it and
+To make the server you operate on the nameserver select a subdomain for it and subsitute
-subsitute `<servername>` for it and its [IP address](/wiki/ip_address.md) `<ip of server>`.
+`<servername>` for it and its [IP address](/wiki/ip_address.md) `<ip of server>`.
 The following uses a filled in example with multiple subdomains.
-It uses CNAME records as a placeholder for the ip.
+It uses CNAME records as a placeholder for the IP.
-In the last section the domain itself `home.server` is mapped to the ip
+In the last section the domain itself `home.server` is mapped to the IP `192.168.178.16`.
-`192.168.178.16`.
+This cannot be done with CNAME as `home.server` is already mapped as a nameserver and assigning it
-This cannot be done with CNAME as `home.server` is already mapped as a
+multiple times is not supported.
-nameserver and assigning it multiple times is not supported.
 
 ```txt
 $TTL 1D
@@ -145,12 +141,11 @@ quentin                              IN A       192.168.178.18
 sheldon                              IN A       192.168.178.19
 ```
 
-More [DNS records](./dns.md#records) can be added.
+More [DNS records](/wiki/dns.md#records) can be added.
-Most importantly used and needed for [reverse proxies](./reverse-proxy.md) are
+Most importantly used and needed for [reverse proxies](/wiki/reverse-proxy.md) are
-[A records](./dns.md#a-record) and [CNAME records](./dns.md#cname-record).
+[A records](/wiki/dns.md#a-record) and [CNAME records](/wiki/dns.md#cname-record).
 
-Then create `/etc/bind/extra-zones/revp.178.168.192` and fill it with the
+Then create `/etc/bind/extra-zones/revp.178.168.192` and fill it with the following lines.
-following lines.
 
 ```txt
 $ORIGIN 178.168.192.in-addr.arpa.
@@ -167,17 +162,16 @@ $TTL 1D
 <last part of ipv4> IN  PTR              <thisserver>.<domain>.<tld>.
 ```
 
-Additionally add all domain names in front of the first `(` that have been
+Additionally, add all domain names in front of the first `(` that have been added in the
-added in the `zone.<domain>.<tld>` file as an [A record](./dns.md#a-record).
+`zone.<domain>.<tld>` file as an [A record](/wiki/dns.md#a-record).
-Note that all these have to be followed by a `.` just like
+Note that all these have to be followed by a `.` just like `<thisserver>.<domain>.<tld>.` is.
-`<thisserver>.<domain>.<tld>.` is.
 For all these records add a PTR record too.
 The first part of the PTR line is part of the IP address.
 To get the full address add it to the subnet.
 In this case this server has the IP `192.168.178.15`.
 
-An example of `/etc/bind/extra-zones/revp.178.168.192` that is compatible with
+An example of `/etc/bind/extra-zones/revp.178.168.192` that is compatible with the previous
-the previous examples is shown in the following.
+examples is shown in the following.
 
 ```txt
 $ORIGIN 178.168.192.in-addr.arpa.
@@ -196,5 +190,5 @@ $TTL 1D
 19              IN      PTR             sheldon.home.server.
 ```
 
-According to your IPs and domains you may need to create multiple `revp.` or
+According to your IPs and domains you may need to create multiple `revp.` or `zone.` files and need
-`zone.` files and need to map them back to `named.conf.local`.
+to map them back to `named.conf.local`.

wiki/bluetooth.md

@@ -1,8 +1,8 @@
 # Bluetooth
 
-[Bluetooth](https://www.bluetooth.com/) is a short-range technology for wireless
+[Bluetooth](https://www.bluetooth.com/) is a short-range technology for wireless data transfer.
-data transfer.
+From a [hardware](/wiki/hardware_%28general%29.md) perspective Bluetooth requires a compatible
+adapter to work which may be integrated or external.
 
-For [Linux](/wiki/linux.md) based operating systems the
+Informations on Bluetooth usage on [Linux](/wiki/linux.md)-based operating systems are described in
-[bluez package](/wiki/linux/bluez.md) is used as the implementation of the
+the [Bluetooth section of the Linux hardware entry](/wiki/linux/hardware_%28linux%29.md#bluetooth).
-bluetooth standard.

wiki/calibre.md

@@ -53,7 +53,7 @@ Then press `Recalculate all author sort values` for the change to take effect.
 titles.
 Setting `title_series_sorting = 'strictly_alphabetic'` will use the standard
 title and wont make articles of titles suffixes.
-Afterwards select all books, right-click and select `Edit metadata in bulk`
+Afterward select all books, right-click and select `Edit metadata in bulk`
 under `Edit metadata`.
 Then check the box `update title sort` and press `Ok` to update all sort titles.
 
@@ -80,15 +80,15 @@ After a while calibre should recognize the device which will be apparent by the
 additional buttons on the top menu like the `Send to device`- and the `Device`-Button.
 First make sure only the formats you want will be transfered.
 This can be done by selecting `Device`, `File formats` and checking the formats as needed.
-Afterwards select the books and press `Send to device` to start the process of transfering the
+Afterward select the books and press `Send to device` to start the process of transfering the
 devices.
 Alternatively only specific formats of the books can be send to the device by selecting
 `Send specific format to` and `Main memory` under the `Send to device` menu.
 If there are books that contain series metadata make sure to disconnect the e-reader once and
 reconnect it.
-Afterwards select `Update cached metadata on device` under `Device` to update the metadata
+Afterward select `Update cached metadata on device` under `Device` to update the metadata
 including the series.
-Finally disconnect the device.
+Finally, disconnect the device.
 
 ## KEPUB Format
 
@@ -98,10 +98,10 @@ It is recommended to convert `.mobi` and `.epub` files to a `.kepub` file before
 [transfering it to a Kobo device](#transfer-books-to-a-device).
 For this the Plugin `KePub Output` by Joel Goguen [can be added](#adding-a-plugin) can be
 installed.
-Afterwards books can be converted the normal way, but now the output format `.kepub` is available.
+Afterward books can be converted the normal way, but now the output format `.kepub` is available.
-Additionally the `Kobo Touch Extended` plugin is recommended to use since it makes sending books to
+Additionally, the `Kobo Touch Extended` plugin is recommended to use since it makes sending books
-Kobo e-readers easier.
+to Kobo e-readers easier.
-Finally `KePub Metadata Reader` and `KePub Metadata Reader` make it possible to read and write
+Finally, `KePub Metadata Reader` and `KePub Metadata Reader` make it possible to read and write
 metadata to `.kepub` files which is especially useful.
 
 ## Exporting and Importing Settings and Libraries

wiki/cue_sheet.md

@@ -1,7 +1,7 @@
 # Cue sheet
 
 A cue sheet is a metadata file containing information for the tracks of a CD or
-a file [ripped](./audio.md#extract-audio-files-from-cds) from it.
+a file [ripped](/wiki/audio.md#extract-audio-files-from-cds) from it.
 
 ## Example file
 

wiki/cups.md

@@ -6,21 +6,38 @@ unix and unix-like systems.
 ## Setup
 
 The software can be setup via [Docker](/wiki/docker.md) with the
-[linuxserver image](./docker/linuxserver_-_airsonic.md).
+[linuxserver image](/wiki/docker/linuxserver_-_airsonic.md).
-Additionally to this a client is needed on the system that need access to the
+Additionally, to this a client is needed on the system that need access to the server software.
-server software.
 
 ### Client
 
 To use CUPS an additional client software is needed.
 
 For Linux computers follow these instructions:
+First install the CUPS-client package (in Arch Linux it is included in `cups`).
+Then edit `/etc/cups/client.conf` and insert the following line.
 
-- Install the CUPS-client package (in Arch Linux it is included in `cups`)
+```txt
-- Edit `/etc/cups/client.conf` and insert `ServerName <ip to print-server>:631`
+ServerName <ip to print-server>:631
-- Restart the CUPS service: `systemctl restart cups`
+```
-- Test connectivity: `lpstat -r`
+
-- Check the detected printers with: `lpstat -v`
+Restart the CUPS service.
+
+```ssh
+systemctl restart cups
+```
+
+Then test the connectivity.
+
+```sh
+lpstat -r`
+```
+
+Finally, check the detected printers with the following command.
+
+```sh
+lpstat -v
+```
 
 ## Usage
 

wiki/database.md

@@ -5,5 +5,5 @@ Most prominent type of database are SQL databases.
 
 ## Database management systems (DBMS)
 
-- [MySQL](./docker/mysql.md) is a relational DBMS
+- [MySQL](/wiki/docker/mysql.md) is a relational DBMS
-- [MariaDB](./docker/mariadb.md) is a relational DBMS that is a fork of MySQL
+- [MariaDB](/wiki/docker/mariadb.md) is a relational DBMS that is a fork of MySQL

wiki/discord.md

@@ -2,7 +2,7 @@
 
 [Discord](https://discord.com/) is an social platform that combines voice and video conferences as
 well as instant messaging chats.
-Additionally to the default website Discord also features a desktop client in the form of an
+Additionally, to the default website Discord also features a desktop client in the form of an
 [Electron-based app](/wiki/electron.md).
 
 ## Alternatives

wiki/dns.md

@@ -9,7 +9,7 @@ It associates various information with domain names.
 The following list shows possible DNS software suites that can be used to set
 up a DNS server.
 
-- [Bind](./bind.md) is a open source package for setting up DNS
+- [Bind](/wiki/bind.md) is a open source package for setting up DNS
 
 ## Records
 

wiki/docker.md

@@ -1,7 +1,7 @@
 # Docker
 
 Docker is a virtualization software that deploys docker containers.
-Due to easy handling and reproducable environments it is a useful tool.
+Due to easy handling and reproducible environments it is a useful tool.
 
 ## Setup
 
@@ -23,53 +23,77 @@ This section addresses various features of Docker.
 
 ### Virtualize Operating Systems
 
-Docker is a tool that can be used to virtualize different programs and softwares.
+Docker is a tool that can be used to virtualize different programs and software.
 Especially for containerizing and virtualizing operating systems (mostly based on
-[Linux](/wiki/linux.md)) can be handled by [distrobox](https://github.com/89luca89/distrobox).
+[Linux](/wiki/linux.md)) can be handled by [Distrobox](https://github.com/89luca89/distrobox).
 
 ### Run Docker as non-root user
 
 To run docker as a non-root user you need to add your user to the `docker` group.
-To do this create the group docker if it doesn't exist `sudo groupadd docker`
+To do this, create the group docker if it doesn't exist `sudo groupadd docker`
 and then add your user to the group using `sudo usermod -aG docker $USER`.
-After that relog into your machine and you should be able to run
+After that log back into your machine.
-`docker run hello-world`.
+Then you should be able to run the following.
 
-### Tools and Visualisation
+```sh
+docker run hello-world
+```
+
+### Tools and Visualization
 
 The programs below are useful docker-management systems in different style.
 
-- [ctop](https://github.com/bcicen/ctop): top-like cli interface for containers
+- [ctop](https://github.com/bcicen/ctop): top-like CLI interface for containers
-- [portainer](https://www.portainer.io/): web ui for managing docker and kubernetes
+- [Portainer](https://www.portainer.io/): web UI for managing docker and Kubernetes
 
 ### Enable Nvidia GPUs
 
-To use Nvidia GPUs with docker you need to install the nvidia-cuda-toolkit.
+To use Nvidia GPUs with docker you need to install the Nvidia CUDA toolkit.
-There is a [guide on marmelab](https://marmelab.com/blog/2018/03/21/using-nvidia-gpu-within-docker-container.html)
+There is a [guide on Marmelab](https://marmelab.com/blog/2018/03/21/using-nvidia-gpu-within-docker-container.html)
-that focusses on that topic.
+that focuses on that topic.
 
 ### Block remote port access
 
 If you configured a [reverse proxy](/wiki/reverse-proxy.md) to a port chances
-are you don't want the port to be accessed outside of the proxy.
+are you don't want the port to be accessed outside the proxy.
-Especially if you set up a authentication over nginx the open port will avoid
+Especially if you set up an authentication over nginx the open port will avoid
 the authentication.
 This can be changed at the forwarded docker-service by replacing for example
 `-p 7000:7000` with `-p 172.17.0.1:7000:7000`.
 This forces the docker container to only expose the port in the docker bridge
 network, effectively banning remote access.
 
-If you use [Traefik](./traefik.md) it is not needed, because you don't have to
+If you use [Traefik](/wiki/traefik.md) it is not needed, because you don't have to
 publish ports to reverse proxy them.
 
-### Dockerize a graphical application
+### Containerize a graphical application
 
-A graphical application can easily be dockerized and made available over both
+A graphical application can easily be containerized using Docker and made available over both
 the [web browser](/wiki/web_browser.md) or [VNC](/wiki/vnc.md).
 For this
 [jlesages baseimage-gui container](https://hub.docker.com/r/jlesage/baseimage-gui)
 can be used.
 
+### Find the Container and the Mounting Point of a Volume
+
+Sometimes it is unclear which container a volume belongs to.
+This is especially the case if the volume was created automatically and not manually or explicitly
+during the setup.
+
+The following command will output the container a volume with the name `<volume-name>` belongs to.
+
+```sh
+docker ps -a --filter volume=<volume_name>
+```
+
+Additionally, the mounting point is also of interest.
+To display it, run the following command where `<container-name>` is the name of the container the
+volume belongs to.
+
+```sh
+docker inspect <container-name>
+```
+
 ## Troubleshooting
 
 This section will focus on errors and the fixing of errors of docker.
@@ -78,12 +102,12 @@ This section will focus on errors and the fixing of errors of docker.
 
 As explained by
 [gotam19 in a Docker forum post](https://forums.docker.com/t/docker-login-fails-with-error-message-saving-credentials-cannot-autolaunch-d-bus-without-x11-display/77789)
-this error message only occurs on [Linux](/wiki/linux.md) when trying to login or pulling a Docker
+this error message only occurs on [Linux](/wiki/linux.md) when trying to log in or pulling a Docker
 image.
-To fix it install  [GPG](/wiki/linux/gpg.md) and the `pass`
+To fix it install [GPG](/wiki/linux/gpg.md) and the `pass`
 [package](/wiki/linux/package_manager.md).
-Afterwards running the following command should will perform the login to the Docker servers and
+Afterward running the following command perform the login to the Docker servers and the error
-the error message should not come up again.
+message should not come up again.
 
 ```sh
 docker login

wiki/docker/actualbudget_-actual-server.md

@@ -15,18 +15,22 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
 Set the following ports in the `ports:` section.
 
+
 | Container Port | Recommended outside port | Protocol  | Description   |
 | -------------- | ------------------------ | --------- | ------------- |
 | `5006`         | `5006`                   | TCP       | WebUI         |
 
+
 ### Volumes
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount | Description        |
 | ------------------------- | --------------- | ------------------ |
 | `actual`                  | `/data`         | Actual Budget data |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/alexjustesen_-_speedtest-tracker.md

@@ -16,6 +16,7 @@ It is important to set a correct app key as described in
 
 Set the following variables with the -e tag.
 
+
 | Name                 | Usage                                                                                              | Default         |
 | -------------------- | -------------------------------------------------------------------------------------------------- | --------------- |
 | `APP_KEY`            | This is used for encryption and can be generated by `echo -n 'base64:'; openssl rand -base64 32;`  |                 |
@@ -26,23 +27,28 @@ Set the following variables with the -e tag.
 | `DISPLAY_TIMEZONE`   | Timezone of the display                                                                            | `Europe/London` |
 | `SPEEDTEST_SCHEDULE` | Cron-formatted schedule for speedtest (`6 */6 * * *`: 6 minutes after every 6th hour)              |                 |
 
+
 ### Volumes
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount | Description          |
 | ------------------------- | --------------- | -------------------- |
 | `speedtest_config`        | `/config`       | storage for config   |
 | `speedtest_keys`          | `/config/keys`  | storage for ssl keys |
 
+
 ### Ports
 
 Set the following ports with the -p tag.
 
+
 | Container Port | Recommended outside port | Protocol | Description               |
 | -------------- | ------------------------ | -------- | ------------------------- |
 | `80`           | `8765`                   | TCP      | WebUI                     |
-| `443`          | ``                       | TCP      | SSL-encrypted WebUI       |
+| `443`          |                        | TCP      | SSL-encrypted WebUI       |
+
 
 ### rebuild.sh
 

wiki/docker/alexta69_-_metube.md

@@ -15,18 +15,22 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
+
 | Outside mount/volume name | Container mount | Description                          |
 | ------------------------- | --------------- | ------------------------------------ |
 | `downloads`               | `/downloads`    | folder to download data to           |
 
+
 ### Ports
 
 Set the following ports in the `ports:` section.
 
+
 | Container Port | Recommended outside port | Protocol | Description |
 | -------------- | ------------------------ | -------- | ----------- |
 | `8881`         | `8081`                   | TCP      | WebUI       |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/ankitects_-_syncserver.md

@@ -22,26 +22,32 @@ Especially set the `<version>` (for example `24.11`) aswell as the `<user>` and
 
 Set the following variables with the -e tag.
 
+
 | Name           | Usage                                                    | Default |
 | -------------- | -------------------------------------------------------- | ------- |
 | `SYNC_USER1`   | contains the `<user>` and `<password>` of the first user |         |
 
+
 ## Ports
 
 Set the following ports in the `ports:` section.
 
+
 | Container Port | Recommended outside port | Protocol  | Description   |
 | -------------- | ------------------------ | --------- | ------------- |
 | `27701`        | `8080`                   | TCP       | Default port  |
 
+
 ## Volumes
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount | Description   |
 | ------------------------- | --------------- | ------------- |
 | `akni-sync-server-data`   | `/anki-data`    | Data storage  |
 
+
 ## rebuild.sh
 
 ```sh

wiki/docker/awesometechnologies_-_synapse-admin.md

@@ -1,7 +1,7 @@
 # awesometechnologies - synapse-admin
 
 This is a [Docker](/wiki/docker.md) container for a Synapse administration server of
-[Matrix](../matrix.md).
+[Matrix](/wiki/matrix.md).
 The official container and documentation was made by
 [awesometechnologies](https://hub.docker.com/awesometechnologies/synapse-admin).
 This docker-rebuild is made up by a `docker-compose.yml` file.
@@ -15,10 +15,12 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
 Set the following ports in the `ports:` section.
 
+
 | Container Port | Recommended outside port | Protocol | Description |
 | -------------- | ------------------------ | -------- | ----------- |
 | `80`           | `80`                     | TCP      | WebUI       |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/axhilrex_-_podgrab.md

@@ -1,6 +1,6 @@
 # axhilrex - podgrab
 
-This is a [Docker](/wiki/docker.md) container for a [Podgrab](../podgrab.md)
+This is a [Docker](/wiki/docker.md) container for a [Podgrab](/wiki/podgrab.md)
 server.
 The official container and documentation was made by
 [axhilrex](https://github.com/akhilrex/podgrab).
@@ -14,27 +14,33 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
 Set the following variables with the -e tag.
 
+
 | Name       | Usage                         | Default |
 | ---------- | ----------------------------- | ------- |
 | `PASSWORD` | Password for `podgrab` user   |         |
 
+
 ### Volumes
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount | Description             |
 | ------------------------- | --------------- | ----------------------- |
 | `podgrab_config`          | `/config`       | Configuration files     |
 | `media_podcasts`          | `/assets`       | location for podcasts   |
 
+
 ### Ports
 
 Set the following ports with the -p tag.
 
+
 | Container Port | Recommended outside port | Protocol | Description |
 | -------------- | ------------------------ | -------- | ----------- |
 | `8080`         | `8080`                   | TCP      | WebUI       |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/b4bz_-_homer.md

@@ -15,18 +15,22 @@ After that rerun `./rebuild.sh` to make update your config.
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount | Description            |
 | ------------------------- | --------------- | ---------------------- |
 | `homer`                   | `/www/assets`   | storage for icons, etc |
 
+
 ### Ports
 
 Set the following ports with the -p tag.
 
+
 | Container Port | Recommended outside port | Protocol | Description |
 | -------------- | ------------------------ | -------- | ----------- |
 | `8080`         | `8080`                   | TCP      | WebUI       |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/bbilly1_-_tubearchivist.md

@@ -17,24 +17,28 @@ docker-compose file.
 
 The following table lists the environment variables for the image `bbilly1/tubearchivist`.
 
+
 | Name               | Usage                                       | Default |
 | -------------------| ------------------------------------------- | ------- |
-| `ES_URL`           | Network address for elastic search instance | ``      |
+| `ES_URL`           | Network address for elastic search instance |       |
-| `REDIS_HOST`       | Redis broker URL                            | ``      |
+| `REDIS_HOST`       | Redis broker URL                            |       |
-| `HOST_UID`         | User ID of Host                             | ``      |
+| `HOST_UID`         | User ID of Host                             |       |
-| `HOST_GID`         | Group ID of Host                            | ``      |
+| `HOST_GID`         | Group ID of Host                            |       |
-| `TA_HOST`          | Domain name for TubeArchivist               | ``      |
+| `TA_HOST`          | Domain name for TubeArchivist               |       |
-| `TA_USERNAME`      | User name for TubeArchivist                 | ``      |
+| `TA_USERNAME`      | User name for TubeArchivist                 |       |
-| `TA_PASSWORD`      | Password for TubeArchivist                  | ``      |
+| `TA_PASSWORD`      | Password for TubeArchivist                  |       |
-| `ELASTIC_PASSWORD` | Password for Elasticsearch                  | ``      |
+| `ELASTIC_PASSWORD` | Password for Elasticsearch                  |       |
-| `TZ`               | Timezone                                    | ``      |
+| `TZ`               | Timezone                                    |       |
+
 
 The following table lists the environment variables for the image `bbilly1/tubearchivist-es`.
 
+
 | Name               | Usage                                       | Default |
 | -------------------| ------------------------------------------- | ------- |
-| `ELASTIC_PASSWORD` | Password for Elasticsearch                  | ``      |
+| `ELASTIC_PASSWORD` | Password for Elasticsearch                  |       |
-| `ES_JAVA_OPTS`     | Additional Java options                     | ``      |
+| `ES_JAVA_OPTS`     | Additional Java options                     |       |
+
 
 ### Volumes
 
@@ -42,25 +46,31 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 
 The following table lists the environment variables for the image `bbilly1/tubearchivist`.
 
+
 | Outside mount/volume name | Container mount          | Description                 |
 | ------------------------- | ------------------------ | --------------------------- |
 | `media`                   | `/youtube`               | storage for media           |
 | `cache`                   | `/cache`                 | storage for cache           |
 
+
 The following table lists the environment variables for the image `bbilly1/tubearchivist-es`.
 
+
 | Outside mount/volume name | Container mount                 | Description                 |
 | ------------------------- | ------------------------------- | --------------------------- |
 | `es`                      | `/usr/share/elasticsearch/data` | storage for elasticsearch   |
 
+
 ### Ports
 
 Set the following ports in the `ports:` section.
 
+
 | Container Port | Recommended outside port | Protocol | Description |
 | -------------- | ------------------------ | -------- | ----------- |
 | `8000`         | `8881`                   | TCP      | WebUI       |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/benbusby_-_whoogle-search.md

@@ -1,6 +1,6 @@
 # benbusby - whoogle-search
 
-This is a [Docker](/wiki/docker.md) container for a [whoogle](../whoogle.md)
+This is a [Docker](/wiki/docker.md) container for a [whoogle](/wiki/whoogle.md)
 meta-search machine.
 The official container and documentation was made by
 [benbusby](https://github.com/benbusby/whoogle-search).
@@ -18,18 +18,22 @@ Set the variables, volumes and ports according and run the `rebuild.sh`.
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount  | Description      |
 | ------------------------- | ---------------- | ---------------- |
 | `searx_config`            | `/config`        | configurations   |
 
+
 ### Ports
 
 Set the following ports with the -p tag.
 
+
 | Container Port | Recommended outside port | Protocol | Description |
 | -------------- | ------------------------ | -------- | ----------- |
 | `5000`         | `8000`                   | TCP      | WebUI       |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/bilde2910_-_hauk.md

@@ -1,11 +1,11 @@
 # bilde2910 - Hauk
 
-This is a docker container for a [Hauk](../hauk.md).
+This is a docker container for a [Hauk](/wiki/hauk.md).
 
 ## Set-up
 
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
-Additionally create a `config.php` file based on the
+Additionally, create a `config.php` file based on the
 [config-sample](https://github.com/bilde2910/Hauk/blob/master/backend-php/include/config-sample.php)
 at the location specified in your  `docker-compose.yml` (in this example it's
 `./config/hauk`).
@@ -21,24 +21,28 @@ htpasswd -cBC 10 /etc/hauk/users.htpasswd <first user name>
 htpasswd -BC 10 /etc/hauk/users.htpasswd <other user name>
 ```
 
-Finally run `./rebuild.sh`.
+Finally, run `./rebuild.sh`.
 
 ### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
+
 | Outside mount/volume name | Container mount    | Description                    |
 | ------------------------- | ------------------ | ------------------------------ |
 | `./config/hauk`           | `/etc/hauk`        | config and password location   |
 
+
 ### Ports
 
 Set the following ports in the `ports:` section.
 
+
 | Container Port | Recommended outside port | Protocol | Description            |
 | -------------- | ------------------------ | -------- | ---------------------- |
 | `80`           | `80`                     | TCP      | Basic service          |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/chocobozzz_-_peertube.md

@@ -1,12 +1,11 @@
 # chocobozz - peertube
 
-This is a [Docker](/wiki/docker.md) container for a [PeerTube](../peertube.md)
+This is a [Docker](/wiki/docker.md) container for a [PeerTube](/wiki/peertube.md) server.
-server.
 The official container and documentation was made by
 [chocobozz](https://github.com/chocobozzz/peertube).
 This docker-rebuild is made up by a `docker-compose.yml` file.
-In addition to the main container you need to connect a
+In addition to the main container you need to connect a [redis container](/wiki/docker/redis.md) to
-[redis container](./redis.md) to it.
+it.
 
 ## Set-up
 
@@ -18,20 +17,24 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
 Set the following ports in the `ports:` section.
 
+
 | Container Port | Recommended outside port | Protocol | Description |
 | -------------- | ------------------------ | -------- | ----------- |
 | `9000`         | `9000`                   | TCP      | WebUI       |
 
+
 ### Volumes
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount            | Description            |
 | ------------------------- | -------------------------- | ---------------------- |
 | `assets`                  | `/app/client/dist`         | storage for icons, etc |
 | `config`                  | `/config`                  | configuration data     |
 | `data`                    | `/data`                    | further data storage   |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/cloudrac3r_-_bibliogram.md

@@ -1,7 +1,7 @@
 # cloudrac3r - bibliogram
 
 This is a [Docker](/wiki/docker.md) container for the alternative Instagram
-frontend [Bibliogram](../bibliogram.md).
+frontend [Bibliogram](/wiki/bibliogram.md).
 The official container and documentation was made by
 [cloudrac3r](https://github.com/cloudrac3r/bibliogram).
 This docker-rebuild is made up by a `docker-compose.yml` file.
@@ -18,18 +18,22 @@ Set the variables, volumes and ports according and run the `rebuild.sh`.
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount | Description                         |
 | ------------------------- | --------------- | ----------------------------------- |
 | `db`                      | `/app/db`       | storage for the bibliogram database |
 
+
 ### Ports
 
 Set the following ports in the `ports:` section.
 
+
 | Container Port | Recommended outside port | Protocol | Description |
 | -------------- | ------------------------ | -------- | ----------- |
 | `10407`        | `10407`                  | TCP      | WebUI       |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/coturn_-_coturn.md

@@ -1,7 +1,7 @@
 # coturn - coturn
 
 This is a [Docker](/wiki/docker.md) container for a TURN/STUN server.
-A server like this can be used in a [Matrix](../matrix.md) server configuration.
+A server like this can be used in a [Matrix](/wiki/matrix.md) server configuration.
 The official container and documentation was made by
 [coturn](https://github.com/coturn/coturn).
 This docker-rebuild is made up by a `docker-compose.yml` file.
@@ -24,12 +24,14 @@ For the public IP the command `curl api.ipify.org` can be used.
 
 Set the following ports in the `ports:` section.
 
+
 | Container Port | Recommended outside port | Protocol | Description |
 | -------------- | ------------------------ | -------- | ----------- |
 | `3478`         | `3478`                   | TCP/UDP  | TURN/STUN   |
 | `5349`         | `5349`                   | TCP/UDP  | TURN/STUN   |
 | `49152-65535`  | `49152-65535`            | UDP      | TURN/STUN   |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/dperson_-_torproxy.md

@@ -1,6 +1,6 @@
 # dperson - torproxy
 
-This is a [Docker](/wiki/docker.md) container for a [Tor](../tor.md) proxy.
+This is a [Docker](/wiki/docker.md) container for a [Tor](/wiki/tor.md) proxy.
 The container and documentation was made by [dperson](https://hub.docker.com/r/dperson/torproxy).
 
 ## Set-up
@@ -12,20 +12,24 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount | Description                |
 | ------------------------- | --------------- | -------------------------- |
 | `tor_var`                 | `/var/lib/tor`  | Location for various files |
 | `tor_etc`                 | `/etc/tor`      | Various other config       |
 
+
 ### Ports
 
 Set the following ports with the -p tag.
 
+
 | Container Port | Recommended outside port | Protocol | Description          |
 | -------------- | ------------------------ | -------- | -------------------- |
 | `8118`         | `8118`                   | HTTP     | privoxy web proxy    |
 | `9050`         | `9050`                   | SOCKS    | socks protocol proxy |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/dyonr_-_jackettvpn.md

@@ -9,7 +9,7 @@ The official container and documentation was made by
 
 Create the file `rebuild.sh` and set `<username>` and `<password>` according to
 your openvpn.
-Additionally change the `LAN_NETWORK` if it differs for your local area network.
+Additionally, change the `LAN_NETWORK` if it differs for your local area network.
 Run `./rebuild.sh` afterwards to create the volumes.
 Place the openvpn certificate in the `jacket_config` docker volume inside the
 `openvpn` folder.
@@ -19,19 +19,23 @@ After that rerun `./rebuild.sh` to make update your config.
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount | Description            |
 | ------------------------- | --------------- | ---------------------- |
 | `jackett_config`          | `/config`       | storage for configs    |
 | `jackett_blackhole`       | `/blackhole`    | storage for magnets    |
 
+
 ### Ports
 
 Set the following ports with the -p tag.
 
+
 | Container Port | Recommended outside port | Protocol | Description |
 | -------------- | ------------------------ | -------- | ----------- |
 | `9117`         | `9117`                   | TCP      | WebUI       |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/dyonr_-_qbittorrentvpn.md

@@ -1,7 +1,7 @@
 # dyonr - qbittorrentvpn
 
 This is a [Docker](/wiki/docker.md) container for a
-[qBittorrent](../qbittorrent.md) server that is connected to the internet via
+[qBittorrent](/wiki/qbittorrent.md) server that is connected to the internet via
 an [openVPN tunnel](/wiki/openvpn.md).
 The official container and documentation was made by
 [dyonr](https://github.com/DyonR/docker-qbittorrentvpn).
@@ -18,40 +18,48 @@ Both can be changed in the web interface after setup.
 
 Set the following variables with the -e tag.
 
+
 | Name                | Usage                       | Default |
 | ------------------- | --------------------------- | ------- |
-| `VPN_ENABLE`        | Enable VPN                  | ` `     |
+| `VPN_ENABLE`        | Enable VPN                  |      |
-| `VPN_USERNAME`      | Username for OpenVPN        | ` `     |
+| `VPN_USERNAME`      | Username for OpenVPN        |      |
-| `VPN_PASSWORD`      | Password for OpenVPN        | ` `     |
+| `VPN_PASSWORD`      | Password for OpenVPN        |      |
-| `LAN_NETWORK`       | Subnet of the local network | ` `     |
+| `LAN_NETWORK`       | Subnet of the local network |      |
+
 
 ### Volumes
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount     | Description             |
 | ------------------------- | ------------------- | ----------------------- |
 | `qbittorrentvpn_config`   | `/config`           | Configuration files     |
 | `qbittorrentvpn_data`     | `/downloads`        | Storage for data        |
 
+
 ### Ports
 
 Set the following ports with the -p tag.
 
+
 | Container Port | Recommended outside port | Protocol | Description |
 | -------------- | ------------------------ | -------- | ----------- |
 | `9091`         | `8080`                   | TCP      | WebUI       |
 
+
 ### Additional
 
 There are some special variables to set.
 
+
 | Flag        | Usage                  |
 | ----------- | ---------------------- |
 | `--cap-add` | add linux capabilities |
 | `--device`  | connect devices        |
 | `--sysctl`  | configure systemctl    |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/gitea_-_gitea.md

@@ -1,10 +1,9 @@
 # gitea - gitea
 
-This is a [Docker](/wiki/docker.md) container for a [Gitea](../gitea.md).
+This is a [Docker](/wiki/docker.md) container for a [Gitea](/wiki/gitea.md).
-The Server consists of 2 Docker containers, one is the gitea main server and one
+The Server consists of 2 Docker containers, one is the gitea main server and one is a database.
-is a database.
+In addition to the main container you need to connect a [mySQL container](/wiki/docker/mysql.md) to
-In addition to the main container you need to connect a [mySQL container](./mysql.md)
+it.
-to it.
 
 ## Set-up
 
@@ -16,6 +15,7 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
 
+
 | Name        | Usage                          | Default |
 | ----------- | ------------------------------ | ------- |
 | `USER_UID`  | User userid to run gitea       |         |
@@ -26,42 +26,51 @@ docker-compose file.
 | `DB_USER`   | Username for the database      |         |
 | `DB_PASSWD` | Password for the database      |         |
 
+
 ### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
+
 | Outside mount/volume name | Container mount    | Description                    |
 | ------------------------- | ------------------ | ------------------------------ |
 | `data`                    | `/data`            | storage for data of git server |
 | `/etc/timezone`           | `/etc/timezone:ro` | link timezone                  |
 | `/etc/localtime`          | `/etc/localtime`   | link localtime                 |
 
+
 ### Ports
 
 Set the following ports in the `ports:` section.
 
+
 | Container Port | Recommended outside port | Protocol | Description            |
 | -------------- | ------------------------ | -------- | ---------------------- |
 | `3000`         | `3000`                   | TCP      | WebUI                  |
 | `22`           | `222`                    | TCP      | ssh port of git server |
 
+
 ### Networks
 
 Set the following networks in the `networks:` section of the docker-compose file.
 
+
 | Name    | Usage                 |
 | ------- | --------------------- |
 | `gitea` | connect db with gitea |
 
+
 ### Dependencies
 
 Set the following dependencies in the `depends_on:` section of the
 docker-compose file.
 
+
 | Name | Usage                |
 | ---- | -------------------- |
 | `db` | Ensure db is running |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/gramps-project_-_grampsweb.md

@@ -1,6 +1,6 @@
 # gramps-project - gramps
 
-This is a [Docker](/wiki/docker.md) container for a [Gramps](../gramps.md)
+This is a [Docker](/wiki/docker.md) container for a [Gramps](/wiki/gramps.md)
 server.
 The Server consists of 2 Docker containers, one is the gramps main server - split into two
 subcontainers - and one a [redis instance](/wiki/docker/redis.md).
@@ -15,17 +15,20 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
 
+
 | Name                                      | Usage                                | Default |
 | ----------------------------------------- | ------------------------------------ | ------- |
-| `GRAMPSWEB_TREE`                          | Will create a new tree if not exists | ``      |
+| `GRAMPSWEB_TREE`                          | Will create a new tree if not exists |       |
-| `GRAMPSWEB_CELERY_CONFIG__broker_url`     | Redis broker URL                     | ``      |
+| `GRAMPSWEB_CELERY_CONFIG__broker_url`     | Redis broker URL                     |       |
-| `GRAMPSWEB_CELERY_CONFIG__result_backend` | Redis backend URL                    | ``      |
+| `GRAMPSWEB_CELERY_CONFIG__result_backend` | Redis backend URL                    |       |
-| `GRAMPSWEB_RATELIMIT_STORAGE_URI`         | Storage URI                          | ``      |
+| `GRAMPSWEB_RATELIMIT_STORAGE_URI`         | Storage URI                          |       |
+
 
 ### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
+
 | Outside mount/volume name | Container mount          | Description                 |
 | ------------------------- | ------------------------ | --------------------------- |
 | `gramps_users`            | `/app/users`             | storage for users           |
@@ -37,14 +40,17 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | `gramps_media`            | `/app/media`             | storage for media           |
 | `gramps_tmp`              | `/tmp`                   | storage for temporary files |
 
+
 ### Ports
 
 Set the following ports in the `ports:` section.
 
+
 | Container Port | Recommended outside port | Protocol | Description |
 | -------------- | ------------------------ | -------- | ----------- |
 | `5000`         | `80`                     | TCP      | WebUI       |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/grimsi_-_gameyfin.md

@@ -9,13 +9,14 @@ Change the settings according to your needs.
 Create the volume for the configuration files by running the command `docker volume create
 gameyfin_config`.
 Make sure to run the following command on the config volume `chown -R 1000:root gameyfin_config`.
-Afterwards run `./rebuild.sh`.
+Afterward run `./rebuild.sh`.
 
 ### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
 
+
 | Name                              | Usage                                   | Default |
 | --------------------------------- | --------------------------------------- | ------- |
 | `GAMEYFIN_USER`                   | user name for gameyfin                  |         |
@@ -23,18 +24,22 @@ docker-compose file.
 | `GAMEYFIN_IGDB_API_CLIENT_ID`     | id of twitch internet game database     |         |
 | `GAMEYFIN_IGDB_API_CLIENT_SECRET` | secret of twitch internet game database |         |
 
+
 ### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
+
 | Outside mount/volume name | Container mount         | Description                    |
 | ------------------------- | ----------------------- | ------------------------------ |
 | `media_games`             | `/opt/gameyfin-library` | storage for games and configs  |
 
+
 ### Ports
 
 Set the following ports in the `ports:` section.
 
+
 | Container Port | Recommended outside port | Protocol | Description            |
 | -------------- | ------------------------ | -------- | ---------------------- |
 | `8080`         | `8093`                   | TCP      | WebUI                  |

wiki/docker/haugene_-_transmission-openvpn.md

@@ -1,7 +1,7 @@
 # haugene - transmission-openvpn
 
 This is a [Docker](/wiki/docker.md) container for a
-[transmission](../transmission.md) server that is connected to the internet via
+[transmission](/wiki/transmission.md) server that is connected to the internet via
 an [openVPN tunnel](/wiki/openvpn.md).
 The official container and documentation was made by
 [haugene](https://github.com/haugene/docker-transmission-openvpn).
@@ -17,33 +17,39 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
 Set the following variables with the -e tag.
 
+
 | Name                | Usage                       | Default |
 | ------------------- | --------------------------- | ------- |
-| `OPENVPN_PROVIDER`  | Provider for OpenVPN        | ` `     |
+| `OPENVPN_PROVIDER`  | Provider for OpenVPN        |      |
-| `OPENVPN_USERNAME`  | Username for OpenVPN        | ` `     |
+| `OPENVPN_USERNAME`  | Username for OpenVPN        |      |
-| `OPENVPN_PASSWORD`  | Password for OpenVPN        | ` `     |
+| `OPENVPN_PASSWORD`  | Password for OpenVPN        |      |
-| `LOCAL_NETWORK`     | Subnet of the local network | ` `     |
+| `LOCAL_NETWORK`     | Subnet of the local network |      |
-| `CREATE_TUN_DEVICE` | Use a tunnel device         | ` `     |
+| `CREATE_TUN_DEVICE` | Use a tunnel device         |      |
-| `WEBPROXY_ENABLES`  | Use a webproxy              | ` `     |
+| `WEBPROXY_ENABLES`  | Use a webproxy              |      |
+
 
 ### Volumes
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount | Description             |
 | ------------------------- | --------------- | ----------------------- |
 | `transmission_config`     | `/config`           | Configuration files     |
 | `transmission data`       | `/data`         | Storage for data        |
 | `/etc/localtime`          | `/etc/localtime:ro` | Link to the systemtime  |
 
+
 ### Ports
 
 Set the following ports with the -p tag.
 
+
 | Container Port | Recommended outside port | Protocol | Description |
 | -------------- | ------------------------ | -------- | ----------- |
 | `9091`         | `9091`                   | TCP      | WebUI       |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/henrywhitaker3_-_speedtest-tracker.md

@@ -14,27 +14,33 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
 Set the following variables with the -e tag.
 
+
 | Name              | Usage                         | Default |
 | ----------------- | ----------------------------- | ------- |
 | `OOKLA_EULA_GDPR` | set to `true` to accept EULA  |         |
 | `AUTH`            | set to `true` to enable login |         |
 
+
 ### Volumes
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount | Description        |
 | ------------------------- | --------------- | ------------------ |
 | `speedtest`               | `/config`       | storage for config |
 
+
 ### Ports
 
 Set the following ports with the -p tag.
 
+
 | Container Port | Recommended outside port | Protocol | Description |
 | -------------- | ------------------------ | -------- | ----------- |
 | `80`           | `8765`                   | TCP      | WebUI       |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/homeassistant_-_home-assistant.md

@@ -14,18 +14,22 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount | Description                     |
 | ------------------------- | --------------- | ------------------------------- |
 | `homeassistant_data`      | `/config`       | configuration for devices, etc  |
 
+
 ### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
 
+
 | Name                  | Usage                       | Default                 |
 | --------------------- | --------------------------- | ----------------------- |
-| `TZ`                  | specify the timezone        | ``                      |
+| `TZ`                  | specify the timezone        |                       |
+
 
 ### Additional
 

wiki/docker/immich-app_-_immich-server.md

@@ -24,19 +24,23 @@ The environment variables are set via the `.env` file and listed in the
 
 Set the following ports in the `ports:` section.
 
+
 | Container Port | Recommended outside port | Protocol  | Description   |
 | -------------- | ------------------------ | --------- | ------------- |
 | `2283`         | `3001`                   | TCP       | WebUI         |
 
+
 ### Volumes
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount       | Description   |
 | ------------------------- | --------------------- | ------------- |
 | `immich_library`          | `/usr/src/app/upload` | Library       |
 | `/etc/timezone`           | `/etc/timezone:ro`    | Timezone      |
 
+
 ### rebuild.sh
 
 ```sh #!/bin/sh

wiki/docker/itzg_-_minecraft-server.md

@@ -8,12 +8,13 @@ The container and documentation was made by
 ## Set-up
 
 Create the file `rebuild.sh`.
-Change the settings according to your needs and run `./rebuild.sh` afterwards.
+Change the settings according to your needs and run `./rebuild.sh` afterward.
 
 ### Environment-variables
 
 Set the following variables with the -e tag.
 
+
 | Name          | Usage                                                          | Default                                      |
 | ------------- | -------------------------------------------------------------- | -------------------------------------------- |
 | `EULA`        | Accept the EULA                                                |                                              |
@@ -24,22 +25,27 @@ Set the following variables with the -e tag.
 | `ICON`        | Link the Icon of the Server                                    |                                              |
 | `MOTD`        | Set the Message of the day                                     | "A Paper Minecraft Server powered by Docker" |
 
+
 ### Volumes
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount | Description                    |
 | ------------------------- | --------------- | ------------------------------ |
 | `minecraft`               | `/data`         | location for all relevant data |
 
+
 ### Ports
 
 Set the following ports with the -p tag.
 
+
 | Container Port | Recommended outside port | Protocol  | Description        |
 | -------------- | ------------------------ | --------- | ------------------ |
 | `25565`        | `25565`                  | Minecraft | Port for Minecraft |
 
+
 ### rebuild.sh
 
 ```sh
@@ -74,7 +80,7 @@ For this set the server type by using the `-e TYPE=<type>` flag.
 Most notably this value could be `FABRIC` or `FORGE`.
 After this the mods (as `.jar` files) can be placed in the `mods` directory of the
 [Docker](/wiki/docker.md) volume.
-Afterwards run the [`rebuild.sh`](#rebuildsh) to restart the server with loaded mods.
+Afterward run the [`rebuild.sh`](#rebuildsh) to restart the server with loaded mods.
 
 #### Installing Datapacks
 

wiki/docker/iv-org_-_invidious.md

@@ -1,19 +1,18 @@
 # iv-org - invidious
 
-This is a [Docker](/wiki/docker.md) container for [Invidious](../invidious.md).
+This is a [Docker](/wiki/docker.md) container for [Invidious](/wiki/invidious.md).
 The official container and documentation was made by
 [invidious](https://github.com/iv-org/invidious).
 This docker-rebuild is made up by a `docker-compose.yml` file.
 There is no official pre-build on docker-hub.
 In addition to the main container you need to connect a
-[postgres container](./postgres.md) to it.
+[postgres container](/wiki/docker/postgres.md) to it.
 
 ## Set-up
 
 First of all create a folder for your `rebuild.sh`.
-After that clone invidious from
+After that clone invidious from [GitHub](https://github.com/iv-org/invidious) into a folder within
-[GitHub](https://github.com/iv-org/invidious) into a folder within the
+the just created folder.
-just created folder.
 You can find the `docker-compose.yml` in the cloned directory.
 Set the variables, volumes and ports according and run the `rebuild.sh`.
 
@@ -22,6 +21,7 @@ Set the variables, volumes and ports according and run the `rebuild.sh`.
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
 
+
 | Name                   | Usage                                                      | Default |
 | ---------------------- | ---------------------------------------------------------- | ------- |
 | `channel_threads`      | numer of threads to use for refreshing channels            | `1`     |
@@ -39,14 +39,17 @@ docker-compose file.
 | `popular_enabled`      | enable the popular section                                 | `true`  |
 | `registration_enabled` | enable registration for new users                          | `true`  |
 
+
 ### Ports
 
 Set the following ports in the `ports:` section.
 
+
 | Container Port | Recommended outside port | Protocol | Description |
 | -------------- | ------------------------ | -------- | ----------- |
 | `3000`         | `3000`                   | TCP      | WebUI       |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/jkarlos_-_git-server-docker.md

@@ -13,19 +13,23 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount     | Description               |
 | ------------------------- | ------------------- | ------------------------- |
 | `git-server_repos`        | `/git-server/repos` | storage for git repos     |
 | `git-server_keys`         | `/git-server/keys`  | storage for user ssh keys |
 
+
 ### Ports
 
 Set the following ports with the -p tag.
 
+
 | Container Port | Recommended outside port | Protocol | Description                           |
 | -------------- | ------------------------ | -------- | ------------------------------------- |
 | `22`           | `2222`                   | TCP      | ssh port for accessing the git server |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/johnktims_-_folding-at-home.md

@@ -14,20 +14,24 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
 Set the following ports with the -p tag.
 
+
 | Container Port | Recommended outside port | Protocol | Description |
 | -------------- | ------------------------ | -------- | ----------- |
 | `7396`         | `7396`                   | TCP      | WebUI       |
 
+
 ### Additional
 
 There are some special variables to set.
 
+
 | Flag      | Usage                                 |
 | --------- | ------------------------------------- |
 | `--user`  | set your username                     |
 | `--power` | set the default power to fold at home |
 | `--team`  | set your teamid to contribute points  |
 
+
 ### rebuild.sh
 
 ```sh
@@ -49,4 +53,4 @@ docker run --name folding-at-home \
 
 ### GPU-Support
 
-GPU support is documented in [the docker article](../docker.md).
+GPU support is documented in [the docker article](/wiki/docker.md).

wiki/docker/jonohill_-_docker-openvpn-proxy.md

@@ -14,38 +14,46 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount | Description              |
 | ------------------------- | --------------- | ------------------------ |
 | `ovpn-proxy`              | `/config`       | storage for openvpn data |
 
+
 ### Ports
 
 Set the following ports with the -p tag.
 
+
 | Container Port | Recommended outside port | Protocol | Description  |
 | -------------- | ------------------------ | -------- | ------------ |
 | `9050`         | `8080`                   | HTTP     | proxy port   |
 
+
 ### Environment-Variables
 
 Set the following variables with the -e tag.
 
+
 | Name                | Usage                       | Default |
 | ------------------- | --------------------------- | ------- |
-| `LOCAL_NETWORK`     | Set local network subnet    | ` `     |
+| `LOCAL_NETWORK`     | Set local network subnet    |      |
-| `OPENVPN_USERNAME`  | username for OpenVPN        | ` `     |
+| `OPENVPN_USERNAME`  | username for OpenVPN        |      |
-| `OPENVPN_PASSWORD`  | password for OpenVPN        | ` `     |
+| `OPENVPN_PASSWORD`  | password for OpenVPN        |      |
+
 
 ### Additional
 
 There are some special variables to set.
 
+
 | Flag                                       | Usage                  |
 | ----------- | ---------------------- |
 | `--cap-add` | add linux capabilities |
 | `--device`  | connect devices        |
 | `--sysctl`  | configure systemctl    |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/kiwix_-_kiwix-serve.md

@@ -14,18 +14,22 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
 Set the following ports in the `ports:` section.
 
+
 | Container Port | Recommended outside port | Protocol  | Description   |
 | -------------- | ------------------------ | --------- | ------------- |
 | `80`           | `80`                     | TCP       | WebUI         |
 
+
 ## Volumes
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount | Description    |
 | ------------------------- | --------------- | -------------- |
 | `kiwix_data`              | `/data`         | Data directory |
 
+
 ## rebuild.sh
 
 ```sh

wiki/docker/kohakuhub_-_kohakuhub.md

@@ -0,0 +1,143 @@
+# kohakuhub - kohakuhub
+
+This is a [Docker](/wiki/docker.md) container for a
+[KohakuHub](https://github.com/KohakuBlueleaf/KohakuHub) server.
+The Server consists of multiple Docker containers.
+These are containers for the KohakuHub API and - depending on configuration - MinIO, LakeFS,
+[Postgres](/wiki/docker/postgres.md)
+
+## Set-up
+
+Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
+The file `docker-compose.yml` is usually created automatically.
+For this first download the [repository](https://github.com/KohakuBlueleaf/KohakuHub).
+Then run the following command to generate the `docker-compose.yml` file.
+
+```sh
+python scripts/generate_docker_compose.py
+```
+
+Alternatively the example file `docker-compose.example.yml` file can be copied.
+An additional example can be found in the [corresponding section](#docker-composeyml).
+Change the settings according to your needs and run `./rebuild.sh` afterwards.
+
+To publish the page on a domain the nginx container usually called `hub-ui` has to be published -
+for example using a reverse proxy like
+[traefik](/wiki/traefik.md#reverse-proxies-for-docker-service).
+
+### Environment Variables
+
+Set the following environment-variables in the `environment:` section of the
+docker-compose file.
+There are many other environment variables, which are automatically generated and not listed here.
+
+| Name | Usage | Default |
+| ----------------------------------------- | ------------------------------------ | ------- |
+| `KOHAKU_HUB_INVITATION_ONLY` | Will disable public registration | false |
+
+### Volumes
+
+There are some volumes, which are automatically generated and not listed here.
+
+### Ports
+
+There are no ports, which are exposed by default.
+
+### rebuild.sh
+
+```sh
+#!/bin/sh
+docker-compose down
+docker-compose up -d
+```
+
+### docker-compose.yml
+
+```yml 
+services:
+  hub-ui:
+    image: nginx:alpine
+    restart: always
+    volumes:
+      - ./src/kohaku-hub-ui/dist:/usr/share/nginx/html
+      - ./src/kohaku-hub-admin/dist:/usr/share/nginx/html-admin
+      - ./docker/nginx/default.conf:/etc/nginx/conf.d/default.conf
+    depends_on:
+      - hub-api
+    
+  hub-api:
+    build: .
+    restart: always
+    depends_on:
+      - postgres
+      - lakefs
+      - minio
+    environment:
+      - KOHAKU_HUB_INVITATION_ONLY=true
+      - KOHAKU_HUB_BASE_URL=https://hub.sub.domain.tld
+      - KOHAKU_HUB_S3_PUBLIC_ENDPOINT=https://s3.sub.domain.tld
+      - KOHAKU_HUB_SESSION_SECRET=CHANGE_ME_SESSION_SECRET
+      - KOHAKU_HUB_ADMIN_SECRET_TOKEN=CHANGE_ME_ADMIN_TOKEN
+      - KOHAKU_HUB_DATABASE_KEY=CHANGE_ME_DATABASE_KEY
+      - KOHAKU_HUB_DB_BACKEND=postgres
+      - KOHAKU_HUB_DATABASE_URL=postgresql://user:password@postgres:5432/database
+      - KOHAKU_HUB_S3_ENDPOINT=http://minio:9000
+      - KOHAKU_HUB_S3_ACCESS_KEY=CHANGE_ME_S3_ACCESS_KEY
+      - KOHAKU_HUB_S3_SECRET_KEY=CHANGE_ME_S3_SECRET_KEY
+      - KOHAKU_HUB_S3_BUCKET=example-bucket
+      - KOHAKU_HUB_S3_REGION=us-east-1
+      - KOHAKU_HUB_LAKEFS_ENDPOINT=http://lakefs:28000
+      - KOHAKU_HUB_LAKEFS_REPO_NAMESPACE=example
+      - KOHAKU_HUB_SITE_NAME=ExampleHub
+      - KOHAKU_HUB_AUTO_MIGRATE=true
+    volumes:
+      - ./hub-meta/hub-api:/hub-api-creds
+  
+  minio:
+    image: quay.io/minio/minio:latest
+    command: server /data --console-address ":29000"
+    restart: unless-stopped
+    environment:
+      - MINIO_ROOT_USER=CHANGE_ME_MINIO_USER
+      - MINIO_ROOT_PASSWORD=CHANGE_ME_MINIO_PASSWORD
+    volumes:
+      - ./hub-storage/minio-data:/data
+      - ./hub-meta/minio-data:/root/.minio
+  
+  lakefs:
+    build:
+      context: ./docker/lakefs
+    entrypoint: ["/bin/sh", "/scripts/lakefs-entrypoint.sh"]
+    command: ["run"]
+    restart: unless-stopped
+    depends_on:
+      - minio
+      - postgres
+    environment:
+      - LAKEFS_DATABASE_TYPE=postgres
+      - LAKEFS_DATABASE_POSTGRES_CONNECTION_STRING=postgres://user:password@postgres:5432/lakefs?sslmode=disable
+      - LAKEFS_BLOCKSTORE_TYPE=s3
+      - LAKEFS_BLOCKSTORE_S3_ENDPOINT=http://minio:9000
+      - LAKEFS_BLOCKSTORE_S3_BUCKET=example-bucket
+      - LAKEFS_BLOCKSTORE_S3_FORCE_PATH_STYLE=true
+      - LAKEFS_BLOCKSTORE_S3_CREDENTIALS_ACCESS_KEY_ID=CHANGE_ME_S3_ACCESS_KEY
+      - LAKEFS_BLOCKSTORE_S3_CREDENTIALS_SECRET_ACCESS_KEY=CHANGE_ME_S3_SECRET_KEY
+      - LAKEFS_BLOCKSTORE_S3_REGION=us-east-1
+      - LAKEFS_AUTH_ENCRYPT_SECRET_KEY=CHANGE_ME_LAKEFS_SECRET
+      - LAKEFS_LISTEN_ADDRESS=0.0.0.0:28000
+    volumes:
+      - ./hub-meta/lakefs-data:/var/lakefs/data
+      - ./hub-meta/lakefs-cache:/lakefs/data/cache
+      - ./docker/lakefs/lakefs-entrypoint.sh:/scripts/lakefs-entrypoint.sh:ro
+      - ./docker/lakefs/init-databases.sh:/scripts/init-databases.sh:ro
+  
+  postgres:
+    image: postgres:15
+    restart: always
+    environment:
+      - POSTGRES_USER=user
+      - POSTGRES_PASSWORD=password
+      - POSTGRES_DB=database
+    volumes:
+      - ./hub-meta/postgres-data:/var/lib/postgresql/data
+```

wiki/docker/kylemanna_-_openvpn.md

@@ -20,32 +20,38 @@ docker run -v openvpn:/etc/openvpn --rm kylemanna/openvpn ovpn_genconfig -u udp:
 docker run -v openvpn:/etc/openvpn --rm -it kylemanna/openvpn ovpn_initpki
 ```
 
-Afterwards run `./rebuild.sh`.
+Afterward run `./rebuild.sh`.
 
 ### Volumes
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount | Description              |
 | ------------------------- | --------------- | ------------------------ |
 | `ovpn`                    | `/etc/openvpn`  | storage for openvpn data |
 
+
 ### Ports
 
 Set the following ports with the -p tag.
 
+
 | Container Port | Recommended outside port | Protocol | Description  |
 | -------------- | ------------------------ | -------- | ------------ |
 | `1194`         | `1194`                   | UDP      | openvpn port |
 
+
 ### Additional
 
 There are some special variables to set.
 
+
 | Flag        | Usage                  |
 | ----------- | ---------------------- |
 | `--cap-add` | add linux capabilities |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/linuxserver_-_airsonic-advanced.md

@@ -1,7 +1,7 @@
 # linuxserver - airsonic-advanced
 
 This is a [Docker](/wiki/docker.md) container for a
-[Airsonic-Advanced](../airsonic-advanced.md) server.
+[Airsonic-Advanced](/wiki/airsonic-advanced.md) server.
 The official container and documentation was made by
 [linuxserver](https://github.com/linuxserver/docker-airsonic-advanced).
 
@@ -14,16 +14,19 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
 Set the following variables with the -e tag.
 
+
 | Name   | Usage    | Default |
 | ------ | -------- | ------- |
 | `PUID` | UserID   |         |
 | `PGID` | GroupID  |         |
 | `TZ`   | Timezone |         |
 
+
 ### Volumes
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount | Description             |
 | ------------------------- | --------------- | ----------------------- |
 | `airsonicadv_config`      | `/config`       | Configuration files     |
@@ -33,14 +36,17 @@ Set the following volumes with the -v tag.
 | `media_audiobooks`        | `/audiobooks`   | Location for audiobooks |
 | `media_podcasts`          | `/podcasts`     | location for podcasts   |
 
+
 ### Ports
 
 Set the following ports with the -p tag.
 
+
 | Container Port | Recommended outside port | Protocol | Description |
 | -------------- | ------------------------ | -------- | ----------- |
 | `4040`         | `4040`                   | TCP      | WebUI       |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/linuxserver_-_airsonic.md

@@ -1,6 +1,6 @@
 # linuxserver - airsonic
 
-This is a [Docker](/wiki/docker.md) container for a [airsonic](../airsonic.md)
+This is a [Docker](/wiki/docker.md) container for a [airsonic](/wiki/airsonic.md)
 server.
 The official container and documentation was made by
 [linuxserver](https://hub.docker.com/r/linuxserver/airsonic).
@@ -14,16 +14,19 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
 Set the following variables with the -e tag.
 
+
 | Name   | Usage    | Default |
 | ------ | -------- | ------- |
 | `PUID` | UserID   |         |
 | `PGID` | GroupID  |         |
 | `TZ`   | Timezone |         |
 
+
 ### Volumes
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount | Description             |
 | ------------------------- | --------------- | ----------------------- |
 | `airsonic_config`         | `/config`       | Configuration files     |
@@ -33,14 +36,17 @@ Set the following volumes with the -v tag.
 | `media_audiobooks`        | `/audiobooks`   | Location for audiobooks |
 | `media_podcasts`          | `/podcasts`     | location for podcasts   |
 
+
 ### Ports
 
 Set the following ports with the -p tag.
 
+
 | Container Port | Recommended outside port | Protocol | Description |
 | -------------- | ------------------------ | -------- | ----------- |
 | `4040`         | `4040`                   | TCP      | WebUI       |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/linuxserver_-_freshrss.md

@@ -16,28 +16,34 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
 
+
 | Name   | Usage                        | Default |
 | ------ | ---------------------------- | ------- |
 | `PUID` | Userid to run the container  |         |
 | `PGID` | Groupid to run the container |         |
 | `TZ`   | specify the timezone         |         |
 
+
 ### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
+
 | Outside mount/volume name | Container mount | Description                          |
 | ------------------------- | --------------- | ------------------------------------ |
 | `config`                  | `/config`       | storage for config files of jellyfin |
 
+
 ### Ports
 
 Set the following ports in the `ports:` section.
 
+
 | Container Port | Recommended outside port | Protocol | Description |
 | -------------- | ------------------------ | -------- | ----------- |
 | `7008`         | `80`                     | TCP      | WebUI       |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/linuxserver_-_jellyfin.md

@@ -1,6 +1,6 @@
 # linuxserver - jellyfin
 
-This is a [Docker](/wiki/docker.md) container for a [jellyfin](../jellyfin.md)
+This is a [Docker](/wiki/docker.md) container for a [jellyfin](/wiki/jellyfin.md)
 server.
 The official container and documentation was made by
 [linuxserver](https://hub.docker.com/r/linuxserver/jellyfin).
@@ -16,16 +16,19 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
 
+
 | Name   | Usage                        | Default |
 | ------ | ---------------------------- | ------- |
 | `PUID` | Userid to run the container  |         |
 | `PGID` | Groupid to run the container |         |
 | `TZ`   | specify the timezone         |         |
 
+
 ### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
+
 | Outside mount/volume name | Container mount | Description                          |
 | ------------------------- | --------------- | ------------------------------------ |
 | `config`                  | `/config`       | storage for config files of jellyfin |
@@ -33,6 +36,7 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | `media_tvshows`           | `/data/tvshows` | storage for tvshows                  |
 | `transcode`               | `/transcode`    | tmp storage to transcode             |
 
+
 Because it is useful to have the possibility to use the `media_movies` and
 `media_tvshows` in multiple containers,
 it is recommended to use them as external volumes (volumes section:
@@ -44,10 +48,12 @@ To use the rebuild the volumes have to exist before creating the container
 
 Set the following ports in the `ports:` section.
 
+
 | Container Port | Recommended outside port | Protocol | Description |
 | -------------- | ------------------------ | -------- | ----------- |
 | `8096`         | `8096`                   | TCP      | WebUI       |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/linuxserver_-_lidarr.md

@@ -26,29 +26,35 @@ This namely causes the following line in the
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
 
+
 | Name                  | Usage                       | Default                 |
 | --------------------- | --------------------------- | ----------------------- |
 | `PUID`                | user id for container user  | `1000`                  |
 | `PGID`                | group id for container user | `1000`                  |
 | `TZ`                  | specify the timezone        | `Etc/UTC`               |
 
+
 ### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
+
 | Outside mount/volume name | Container mount   | Description                       |
 | ------------------------- | ----------------- | --------------------------------- |
 | `config`                  | `/config`         | directory for config              |
 | `complete`                | `/music`          | directory for music               |
 
+
 ### Ports
 
 Set the following ports in the `ports:` section.
 
+
 | Container Port | Recommended outside port | Protocol | Description  |
 | -------------- | ------------------------ | -------- | ------------ |
 | `8686`         | `8686`                   | TCP      | webUI        |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/linuxserver_-_radarr.md

@@ -26,29 +26,35 @@ This namely causes the following line in the
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
 
+
 | Name                  | Usage                       | Default                 |
 | --------------------- | --------------------------- | ----------------------- |
 | `PUID`                | user id for container user  | `1000`                  |
 | `PGID`                | group id for container user | `1000`                  |
 | `TZ`                  | specify the timezone        | `Etc/UTC`               |
 
+
 ### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
+
 | Outside mount/volume name | Container mount   | Description                       |
 | ------------------------- | ----------------- | --------------------------------- |
 | `config`                  | `/config`         | directory for config              |
 | `complete`                | `/movies`         | directory for music               |
 
+
 ### Ports
 
 Set the following ports in the `ports:` section.
 
+
 | Container Port | Recommended outside port | Protocol | Description  |
 | -------------- | ------------------------ | -------- | ------------ |
 | `7878`         | `7878`                   | TCP      | webUI        |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/linuxserver_-_sonarr.md

@@ -26,29 +26,35 @@ This namely causes the following line in the
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
 
+
 | Name                  | Usage                       | Default                 |
 | --------------------- | --------------------------- | ----------------------- |
 | `PUID`                | user id for container user  | `1000`                  |
 | `PGID`                | group id for container user | `1000`                  |
 | `TZ`                  | specify the timezone        | `Etc/UTC`               |
 
+
 ### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
+
 | Outside mount/volume name | Container mount   | Description                       |
 | ------------------------- | ----------------- | --------------------------------- |
 | `config`                  | `/config`         | directory for config              |
 | `complete`                | `/tv`             | directory for music               |
 
+
 ### Ports
 
 Set the following ports in the `ports:` section.
 
+
 | Container Port | Recommended outside port | Protocol | Description  |
 | -------------- | ------------------------ | -------- | ------------ |
 | `8989`         | `8989`                   | TCP      | webUI        |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/linuxserver_-_syncthing.md

@@ -1,7 +1,7 @@
 # linuxserver - syncthing
 
 This is a [Docker](/wiki/docker.md) container for syncthing for
-[file synchronization](../file-synchronization.md).
+[file synchronization](/wiki/file-synchronization.md).
 The official container and documentation was made by
 [linuxserver](https://hub.docker.com/r/linuxserver/syncthing).
 
@@ -14,6 +14,7 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
 Set the following variables with the -e tag.
 
+
 | Name        | Usage            | Default |
 | ----------- | ---------------- | ------- |
 | `PUID`      | UserID           |         |
@@ -21,24 +22,29 @@ Set the following variables with the -e tag.
 | `TZ`        | Timezone         |         |
 | `UMASK_SET` | setting usermask |         |
 
+
 ### Volumes
 
 Set the following volumes with the -v tag.
 
+
 | Volume-Name        | Container mount | Description                                     |
 | ------------------ | --------------- | ----------------------------------------------- |
 | `syncthing_config` | `/config`       | storage for config and possible downloaded data |
 
+
 ### Ports
 
 Set the following ports with the -p tag.
 
+
 | Container Port | Recommended outside port | Protocol | Description        |
 | -------------- | ------------------------ | -------- | ------------------ |
 | `8384`         | `8384`                   | TCP      | WebUI              |
 | `22000`        | `22000`                  | TCP      | Syncthing internal |
 | `21027`        | `21027`                  | UDP      | Syncthing internal |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/linuxserver_-_tvheadend.md

@@ -1,6 +1,6 @@
 # linuxserver - tvheadend
 
-This is a [Docker](/wiki/docker.md) container for a [TVHeadend](../tvheadend.md)
+This is a [Docker](/wiki/docker.md) container for a [TVHeadend](/wiki/tvheadend.md)
 server.
 The official container and documentation was made by
 [linuxserver](https://hub.docker.com/r/linuxserver/tvheadend).
@@ -8,37 +8,42 @@ The official container and documentation was made by
 ## Set-up
 
 Create the files `rebuild.sh` and `docker-compose.yml` at the same place.
-Change the settings according to your needs and run `./rebuild.sh` afterwards.
+Change the settings according to your needs and run `./rebuild.sh` afterward.
 
 ### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
 
+
 | Name                  | Usage                       | Default                 |
 | --------------------- | --------------------------- | ----------------------- |
 | `PUID`                | user id for container user  | `1000`                  |
 | `PGID`                | group id for container user | `1000`                  |
 | `TZ`                  | specify the timezone        | `Europe/London`         |
-| `RUN_OPTS`          | specify the timezone          | ` `                     |
+| `RUN_OPTS`          | specify the timezone          |                         |
 
 ### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
+
 | Outside mount/volume name | Container mount | Description                       |
 | ------------------------- | --------------- | --------------------------------- |
 | `config`                  | `/config`       | directory for config              |
 | `tvdvr`                   | `/recordings`   | directory for storage             |
 
+
 ### Ports
 
 Set the following ports in the `ports:` section.
 
+
 | Container Port | Recommended outside port | Protocol | Description  |
 | -------------- | ------------------------ | -------- | ------------ |
-| `9981`         | ` `                      | TCP      | webUI        |
+| `9981`         |                       | TCP      | webUI        |
-| `9982`         | ` `                      | TCP      | HTSP port    |
+| `9982`         |                       | TCP      | HTSP port    |
+
 
 ## rebuild.sh
 

wiki/docker/linuxserver_-_wireguard.md

@@ -22,6 +22,7 @@ Then run `./rebuild.sh`
 
 Set the following variables with the -e tag.
 
+
 | Name        | Usage           | Default |
 | ----------- | --------------- | ------- |
 | `PUID`      | UserID          |         |
@@ -30,30 +31,37 @@ Set the following variables with the -e tag.
 | `SERVERURL` | URL of server   |         |
 | `PEERS`     | Number of peers |         |
 
+
 ### Volumes
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount | Description             |
 | ------------------------- | --------------- | ----------------------- |
 | `wireguard`               | `/config`       | Configuration files     |
 
+
 ### Ports
 
 Set the following ports with the -p tag.
 
+
 | Container Port | Recommended outside port | Protocol | Description |
 | -------------- | ------------------------ | -------- | ----------- |
 | `51820`        | `51820`                  | UDP      | VPN port    |
 
+
 ### Additional
 
 There are some special variables to set.
 
+
 | Flag        | Usage                  |
 | ----------- | ---------------------- |
 | `--cap-add` | add linux capabilities |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/mailserver_-_docker-mailserver.md

@@ -32,11 +32,10 @@ And finally generate the DCIM keys and rebuild once again.
 
 `./setup.sh config dkim`
 
-Finally if a reverse proxy is used check the
+Finally, if a reverse proxy is used check the
-[traefik entry](/wiki/docker/traefik.md#setup-mailserver) or the
+[traefik entry](/wiki/docker/traefik.md#setup-mailserver) or the [nginx entry](/wiki/nginx.md).
-[nginx entry](./nginx.md).
 
-Afterwards you're ready to go by once again running the `rebuild.sh` file.
+Afterward you're ready to go by once again running the `rebuild.sh` file.
 
 If setting up this mailserver with [Traefik](/wiki/traefik.md) as a reverse proxy some additional
 steps should be taken.

wiki/docker/mariadb.md

@@ -18,6 +18,7 @@ These are needed most often.
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
 
+
 | Name                  | Usage                         | Default |
 | --------------------- | ----------------------------- | ------- |
 | `MYSQL_ROOT_PASSWORD` | set the mysql admin password  |         |
@@ -25,14 +26,17 @@ docker-compose file.
 | `MYSQL_PASSWORD`      | set the mysql user password   |         |
 | `MYSQL_Database`      | specify mysql database to use |         |
 
+
 ### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
+
 | Outside mount/volume name | Container mount  | Description               |
 | ------------------------- | ---------------- | ------------------------- |
 | `mysql`                   | `/var/lib/mysql` | storage for owncloud data |
 
+
 ### Networks
 
 You can set networks in the `networks:` part of a docker-compose file to connect

wiki/docker/massivedecks_-_client.md

@@ -20,19 +20,23 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
 Set the following ports in the `ports:` section.
 
+
 | Container Port | Recommended outside port | Protocol | Description |
 | -------------- | ------------------------ | -------- | ----------- |
 | `8080`         | `8080`                   | TCP      | WebUI       |
 
+
 ### Environment-variables
 
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
 
+
 | Name        | Usage                   | Default           |
 | ----------- | ----------------------- | ----------------- |
 | `NODE_ENV`  | Setting the environment | `production`      |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/matrixdotorg_-_synapse.md

@@ -1,7 +1,7 @@
 # matrixdotorg - synapse
 
 This is a [Docker](/wiki/docker.md) container for a synapse server using the
-[matrix](../matrix.md) protocol.
+[matrix](/wiki/matrix.md) protocol.
 The official container and documentation was made by
 [matrixdotorg](https://hub.docker.com/matrixdotorg/synapse).
 This docker-rebuild is made up by a `docker-compose.yml` file.
@@ -16,6 +16,7 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
 
+
 | Name                  | Usage                     | Default                 |
 | --------------------- | ------------------------- | ----------------------- |
 | `SYNAPSE_CONFIG_DIR`  | config directory          | `/data`                 |
@@ -24,22 +25,27 @@ docker-compose file.
 | `GID`                 | group id for synapse user | `1000`                  |
 | `TZ`                  | specify the timezone      | `Europe/London`         |
 
+
 ### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
+
 | Outside mount/volume name | Container mount | Description                       |
 | ------------------------- | --------------- | --------------------------------- |
 | `synapse`                 | `/data`         | directory for storage and configs |
 
+
 ### Ports
 
 Set the following ports in the `ports:` section.
 
+
 | Container Port | Recommended outside port | Protocol | Description            |
 | -------------- | ------------------------ | -------- | ---------------------- |
 | `8008`         | `443`                    | TCP      | matrix homeserver port |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/mikenye_-_picard.md

@@ -15,6 +15,7 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
 Set the following variables with the -e tag.
 
+
 | Name             | Usage               | Default |
 | ---------------- | ------------------- | ------- |
 | `USER_ID`        | UserID              | `1000`  |
@@ -22,25 +23,30 @@ Set the following variables with the -e tag.
 | `DISPLAY_WIDTH`  | Width of software   | `1280`  |
 | `DISPLAY_HEIGHT` | Height of software  | `768`   |
 
+
 ### Volumes
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount | Description               |
 | ------------------------- | --------------- | ------------------------- |
 | `config`                  | `/config`       | Configuration files       |
 | `media_music`             | `/storage`      | Location for audio files  |
 
+
 ### Ports
 
 Set the following ports with the -p tag.
 
+
 | Container Port | Recommended outside port | Protocol | Description                |
 | -------------- | ------------------------ | -------- | -------------------------- |
 | `5800`         | `5800`                   | TCP      | WebUI                      |
 | `5900`         | `5900`                   | TCP      | VNC                        |
 | `8000`         | `8000`                   | TCP      | Picard browser integration |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/mysql.md

@@ -18,6 +18,7 @@ These are needed most often.
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
 
+
 | Name                  | Usage                         | Default |
 | --------------------- | ----------------------------- | ------- |
 | `MYSQL_ROOT_PASSWORD` | set the mysql admin password  |         |
@@ -25,14 +26,17 @@ docker-compose file.
 | `MYSQL_PASSWORD`      | set the mysql user password   |         |
 | `MYSQL_Database`      | specify mysql database to use |         |
 
+
 ### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
+
 | Outside mount/volume name | Container mount  | Description               |
 | ------------------------- | ---------------- | ------------------------- |
 | `mysql`                   | `/var/lib/mysql` | storage for owncloud data |
 
+
 ### Networks
 
 You can set networks in the `networks:` part of a docker-compose file to connect

wiki/docker/nextcloud.md

@@ -1,11 +1,11 @@
 # NextCloud
 
-This is a [Docker](/wiki/docker.md) container for [NextCloud](../nextcloud.md).
+This is a [Docker](/wiki/docker.md) container for [NextCloud](/wiki/nextcloud.md).
 The official container and documentation was made by
 [NextCloud](https://hub.docker.com/_/nextcloud).
 This docker-rebuild is made up by a `docker-compose.yml` file.
 The services in this files are explained seperately.
-The main Docker container needs a database in form of a [MariaDB](./mariadb.md)
+The main Docker container needs a database in form of a [MariaDB](/wiki/docker/mariadb.md)
 Docker container.
 
 ## Set-up
@@ -27,18 +27,22 @@ Updating has to be done manually so nothing breaks.
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
+
 | Outside mount/volume name | Container mount | Description                              |
 | ------------------------- | --------------- | ---------------------------------------- |
 | `nextcloud`               | `/var/www/html` | storage for nextcloud plugins and config |
 
+
 ### Ports
 
 Set the following ports in the `ports:` section.
 
+
 | Container Port | Recommended outside port | Protocol | Description |
 | -------------- | ------------------------ | -------- | ----------- |
 | `80`           | `80`                     | TCP      | WebUI       |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/nginx.md

@@ -1,7 +1,7 @@
 # nginx
 
 This is a [Docker](/wiki/docker.md) container for an
-[nginx server](../nginx.md).
+[nginx server](/wiki/nginx.md).
 The official container and documentation was made by
 [nginx](https://hub.docker.com/_/nginx).
 This docker-rebuild is made up by a `docker-compose.yml` file.
@@ -15,19 +15,23 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
+
 | Outside mount/volume name | Container mount      | Description                 |
 | ------------------------- | -------------------- | --------------------------- |
 | `nginx`                   | `/etc/nginx/conf.d/` | directory for nginx configs |
 
+
 ### Ports
 
 Set the following ports in the `ports:` section.
 
+
 | Container Port | Recommended outside port | Protocol | Description |
 | -------------- | ------------------------ | -------- | ----------- |
 | `80`           | `80`                     | TCP      | http port   |
 | `443`          | `443`                    | TCP      | https port  |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/olbat_-_cupsd.md

@@ -1,6 +1,6 @@
 # olbat - cupsd
 
-This is a [Docker](/wiki/docker.md) container for a [Cups](../cups.md) server.
+This is a [Docker](/wiki/docker.md) container for a [Cups](/wiki/cups.md) server.
 The official container and documentation was made by
 [olbat](https://hub.docker.com/r/olbat/cupsd).
 
@@ -13,19 +13,23 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount | Description                     |
 | ------------------------- | --------------- | ------------------------------- |
 | `cups`                    | `/etc/cups`     | configuration for printers, etc |
 | `/var/run/dbus`           | `/var/run/dbus` | connection to host dbus         |
 
+
 ### Ports
 
 Set the following ports with the -p tag.
 
+
 | Container Port | Recommended outside port | Protocol | Description       |
 | -------------- | ------------------------ | -------- | ----------------- |
 | `631`          | `631`                    | TCP      | cups server webui |
 
+
 ### Additional
 
 The default username is `print`, the default password is `print`.

wiki/docker/ollama_-_ollama.md

@@ -13,18 +13,22 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
 Set the following ports in the `ports:` section.
 
+
 | Container Port | Recommended outside port | Protocol  | Description         |
 | -------------- | ------------------------ | --------- | ------------------- |
 | `11434`        | `11434`                  | TCP       | Communications port |
 
+
 ## Volumes
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount | Description   |
 | ------------------------- | --------------- | ------------- |
 | `ollama`                  | `/root/.ollama` | Ollama data |
 
+
 ## rebuild.sh
 
 ```sh

wiki/docker/open-webui_-_open-webui.md

@@ -13,18 +13,22 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
 Set the following ports in the `ports:` section.
 
+
 | Container Port | Recommended outside port | Protocol  | Description   |
 | -------------- | ------------------------ | --------- | ------------- |
 | `11434`        | `8080`                   | TCP       | WebUI         |
 
+
 ## Volumes
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount     | Description     |
 | ------------------------- | ------------------- | --------------- |
 | `open-webui`              | `/app/backend/data` | Open WebUI data |
 
+
 ## rebuild.sh
 
 ```sh

wiki/docker/owncloud.md

@@ -1,12 +1,11 @@
-# owncloud
+# ownCloud
 
-This is a [Docker](/wiki/docker.md) container for a [owncloud](../owncloud.md) server.
+This is a [Docker](/wiki/docker.md) container for a [owncloud](/wiki/owncloud.md) server.
-The official container and documentation was made by
+The official container and documentation was made by [ownCloud](https://hub.docker.com/_/owncloud).
-[owncloud](https://hub.docker.com/_/owncloud).
 This docker-rebuild is made up by a `docker-compose.yml` file.
 The services in this files are explained seperately.
-The main Docker container needs a database in form of a [MariaDB](./mariadb.md)
+The main Docker container needs a database in form of a [MariaDB](/wiki/docker/mariadb.md) Docker
-Docker container.
+container.
 
 ## Set-up
 
@@ -17,19 +16,23 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
+
 | Outside mount/volume name | Container mount        | Description                  |
 | ------------------------- | ---------------------- | ---------------------------- |
-| `owncloud`                | `/var/www/html`        | storage for owncloud plugins |
+| `owncloud`                | `/var/www/html`        | storage for ownCloud plugins |
-| `config`                  | `/var/www/html/config` | storage for owncloud config  |
+| `config`                  | `/var/www/html/config` | storage for ownCloud config  |
+
 
 ### Ports
 
 Set the following ports in the `ports:` section.
 
+
 | Container Port | Recommended outside port | Protocol | Description |
 | -------------- | ------------------------ | -------- | ----------- |
 | `80`           | `80`                     | TCP      | WebUI       |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/oznu_-_docker-cloudflare-ddns.md

@@ -14,12 +14,14 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
 Set the following variables with the -e tag.
 
+
 | Variable name | Description                                            |
 | ------------- | ------------------------------------------------------ |
 | `API_KEY=`    | append your API key that you retrieved from cloudflare |
 | `ZONE=`       | append your domain (for example `main.com`)            |
 | `SUBDOMAIN`   | append your subdomain (for example `dynamic`)          |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/oznu_-_onedrive.md

@@ -12,20 +12,24 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
 Set the following variables with the -e tag.
 
+
 | Name   | Usage   | Default |
 | ------ | ------- | ------- |
 | `PUID` | UserID  |         |
 | `PGID` | GroupID |         |
 
+
 ### Volumes
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount | Description                                     |
 | ------------------------- | --------------- | ----------------------------------------------- |
 | `onedrive_config`         | `/config`       | configuration storage for the server connection |
 | `onedrive_doc`            | `/documents`    | storage for downloaded documents                |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/portainer_-_agent.md

@@ -1,6 +1,6 @@
 # portainer - agent
 
-This is a [Docker](/wiki/docker.md) container for a [portainer](../portainer.md)
+This is a [Docker](/wiki/docker.md) container for a [portainer](/wiki/portainer.md)
 agent.
 The official container and documentation was made by
 [portainer](https://hub.docker.com/r/portainer/agent).
@@ -14,19 +14,23 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount           | Description                            |
 | ------------------------- | ------------------------- | -------------------------------------- |
 | `/var/run/docker.sock`    | `/var/run/docker.sock`    | connect your running docker containers |
 | `/var/lib/docker/volumes` | `/var/lib/docker/volumes` | connect running docker volumes         |
 
+
 ### Ports
 
 Set the following ports with the -p tag.
 
+
 | Container Port | Recommended outside port | Protocol | Description          |
 | -------------- | ------------------------ | -------- | -------------------- |
 | `9001`         | `9001`                   | TCP      | Portainer agent port |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/portainer_-_portainer.md

@@ -1,6 +1,6 @@
 # portainer - portainer
 
-This is a [Docker](/wiki/docker.md) container for a [portainer](../portainer.md)
+This is a [Docker](/wiki/docker.md) container for a [portainer](/wiki/portainer.md)
 server.
 The official container and documentation was made by
 [portainer](https://hub.docker.com/r/portainer/portainer).
@@ -14,19 +14,23 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount        | Description                                       |
 | ------------------------- | ---------------------- | ------------------------------------------------- |
 | `portainer`               | `/data`                | configuration directory                           |
 | `/var/run/docker.sock`    | `/var/run/docker.sock` | connection to local docker containers and volumes |
 
+
 ### Ports
 
 Set the following ports with the -p tag.
 
+
 | Container Port | Recommended outside port | Protocol | Description |
 | -------------- | ------------------------ | -------- | ----------- |
 | `9000`         | `9000`                   | TCP      | WebUI       |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/postgres.md

@@ -19,6 +19,7 @@ These are needed most often.
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
 
+
 | Name                     | Usage                            | Default |
 | ------------------------ | -------------------------------- | ------- |
 | `POSTGRES_ROOT_PASSWORD` | set the postgres admin password  |         |
@@ -26,15 +27,18 @@ docker-compose file.
 | `POSTGRES_PASSWORD`      | set the postgres user password   |         |
 | `POSTGRES_DB`            | specify postgres database to use |         |
 
+
 ### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
+
 | Outside mount/volume name | Container mount            | Description                  |
 | ------------------------- | -------------------------- | ---------------------------- |
 | `postgres`                | `/var/lib/postgresql/data` | storage for owncloud data    |
 | `postgres_config`         | `/config/sql`              | initial sql setup and config |
 
+
 ### Networks
 
 You can set networks in the `networks:` part of a docker-compose file to connect

wiki/docker/prologic_-_golinks.md

@@ -14,18 +14,22 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount | Description                |
 | ------------------------- | --------------- | -------------------------- |
 | `golinks`                 | `/search.db`    | database with all commands |
 
+
 ### Ports
 
 Set the following ports with the -p tag.
 
+
 | Container Port | Recommended outside port | Protocol | Description |
 | -------------- | ------------------------ | -------- | ----------- |
 | `8000`         | `8000`                   | TCP      | WebUI       |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/prologic_-_gopherproxy.md

@@ -13,18 +13,22 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
 Set the following ports with the -p tag.
 
+
 | Container Port | Recommended outside port | Protocol | Description                              |
 | -------------- | ------------------------ | -------- | ---------------------------------------- |
 | `8000`         | `8000`                   | TCP      | port to proxy the gopher site as http to |
 
+
 ### Additional
 
 There are some special variables to set.
 
+
 | Flag   | Usage                                                         |
 | ------ | ------------------------------------------------------------- |
 | `-uri` | define the gopher site to proxy (just 'domain.tld' is enough) |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/prologic_-_todo.md

@@ -13,18 +13,22 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount        | Description            |
 | ------------------------- | ---------------------- | ---------------------- |
 | `todo`                    | `/go/src/todo/todo.db` | Database for todo list |
 
+
 ### Ports
 
 Set the following ports with the -p tag.
 
+
 | Container Port | Recommended outside port | Protocol | Description |
 | -------------- | ------------------------ | -------- | ----------- |
 | `8000`         | `8000`                   | TCP      | WebUI       |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/rblsb_-_synctube.md

@@ -19,18 +19,22 @@ Set the variables, volumes and ports according and run the `rebuild.sh`.
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount     | Description         |
 | ------------------------- | ------------------- | ------------------- |
 | `synctube`                | `/usr/src/app/user` | Configuration files |
 
+
 ### Ports
 
 Set the following ports with the -p tag.
 
+
 | Container Port | Recommended outside port | Protocol | Description |
 | -------------- | ------------------------ | -------- | ----------- |
 | `4200`         | `4200`                   | TCP      | WebUI       |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/redis.md

@@ -18,10 +18,12 @@ These are needed most often.
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
+
 | Outside mount/volume name | Container mount | Description          |
 | ------------------------- | --------------- | -------------------- |
 | `redis`                   | `/data`         | storage for all data |
 
+
 ### Networks
 
 You can set networks in the `networks:` part of a docker-compose file to connect

wiki/docker/rlister_-_hastebin.md

@@ -13,26 +13,32 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
 Set the following variables with the -e tag.
 
+
 | Name           | Usage                   | Default |
 | -------------- | ----------------------- | ------- |
 | `STORAGE_TYPE` | Type to store the datas | `file`  |
 
+
 ### Volumes
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount | Description                |
 | ------------------------- | --------------- | -------------------------- |
 | `hastebin`                | `/app/data`     | storage directory for data |
 
+
 ### Ports
 
 Set the following ports with the -p tag.
 
+
 | Container Port | Recommended outside port | Protocol | Description |
 | -------------- | ------------------------ | -------- | ----------- |
 | `7777`         | `7777`                   | TCP      | WebUI       |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/samba.md

@@ -1,6 +1,6 @@
 # samba
 
-This is a [Docker](/wiki/docker.md) container for a [Samba](../samba.md)
+This is a [Docker](/wiki/docker.md) container for a [Samba](/wiki/samba.md)
 server.
 The official container and documentation was made by
 [dperson](https://hub.docker.com/r/samba).
@@ -14,6 +14,7 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount    | Description                   |
 | ------------------------- | ------------------ | ----------------------------- |
 | `samba_nas`               | `/nas`             | storage for samba data        |
@@ -23,25 +24,30 @@ Set the following volumes with the -v tag.
 | `samba_etc`               | `/etc`             | etc directory of samba server |
 | `samba_log`               | `/var/log/samba`   | storage for samba logs        |
 
+
 ### Ports
 
 Set the following ports with the -p tag.
 
+
 | Container Port | Recommended outside port | Protocol | Description    |
 | -------------- | ------------------------ | -------- | -------------- |
 | `139`          | `139`                    | TCP      | Samba internal |
 | `445`          | `445`                    | TCP      | Samba internal |
 
+
 ### Additional
 
 There are some special variables to set.
 
+
 | Flag                                                                      | Usage            |
 | ------------------------------------------------------------------------- | ---------------- |
 | `-u \<username;password\>(;ID;group;GID)`                                 | define user      |
 | `-w \<workgroup\>`                                                        | define workgroup |
 | `-s \<name;path\>(;browse;readonly;guest;users;admins;writelist;comment)` | define shares    |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/searx_-_searx.md

@@ -1,6 +1,6 @@
 # searx - searx
 
-This is a [Docker](/wiki/docker.md) container for a [searx](../searx.md)
+This is a [Docker](/wiki/docker.md) container for a [searx](/wiki/searx.md)
 meta-search machine.
 The official container and documentation was made by
 [searx](https://hub.docker.com/r/searx/searx).
@@ -14,19 +14,23 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount  | Description      |
 | ------------------------- | ---------------- | ---------------- |
 | `searx_etc`               | `/etc/searx`     | storage for etc  |
 | `searx_log`               | `/var/log/uwsgi` | storage for logs |
 
+
 ### Ports
 
 Set the following ports with the -p tag.
 
+
 | Container Port | Recommended outside port | Protocol | Description |
 | -------------- | ------------------------ | -------- | ----------- |
 | `8080`         | `8080`                   | TCP      | WebUI       |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/sinusbot_-_docker.md

@@ -31,7 +31,7 @@ networks:
     external: true
 ```
 
-Finally make sure to create the external network `teamspeak` before starting the containers.
+Finally, make sure to create the external network `teamspeak` before starting the containers.
 This can be done by running the following command.
 
 ```sh
@@ -47,32 +47,39 @@ Change the other settings according to your needs and run `./rebuild.sh` afterwa
 Set the following environment-variables in the `environment:` section of the
 docker-compose file.
 
+
 | Name        | Usage                          | Default |
 | ----------- | ------------------------------ | ------- |
 | `UID`       | User userid to run gitea       |         |
 | `GID`       | User groupid to run gitea      |         |
 
+
 ### Volumes
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
+
 | Outside mount/volume name | Container mount         | Description                           |
 | ------------------------- | ----------------------- | ------------------------------------- |
 | `sinusbot_scripts`        | `/opt/sinusbot/scripts` | storage for the sinusbot scripts      |
 | `sinusbot_data`           | `/opt/sinusbot/data`    | storage for the most of sinusbot data |
 
+
 ### Ports
 
 Set the following ports in the `ports:` section.
 
+
 | Container Port | Recommended outside port | Protocol | Description            |
 | -------------- | ------------------------ | -------- | ---------------------- |
 | `8087`         | `8087`                   | TCP      | WebUI                  |
 
+
 ### Networks
 
 Set the following networks in the `networks:` section of the docker-compose file.
 
+
 | Name        | Usage                        |
 | ----------- | ---------------------------- |
 | `teamspeak` | connect with local teamspeak |

wiki/docker/sissbrueckner_-_linkding.md

@@ -1,6 +1,6 @@
 # sissbrueckner - linkding
 
-This is a [Docker](/wiki/docker.md) container for a [linkding](../linkding.md)
+This is a [Docker](/wiki/docker.md) container for a [linkding](/wiki/linkding.md)
 bookmark and archive service.
 The official container and documentation was made by
 [sissbrueckner](https://github.com/sissbruecker/linkding).
@@ -8,8 +8,8 @@ The official container and documentation was made by
 ## Set-up
 
 Create the file `rebuild.sh`.
-Change the settings according to your needs and run `./rebuild.sh` afterwards.
+Change the settings according to your needs and run `./rebuild.sh` afterward.
-Afterwards you need to create a user.
+Afterward you need to create a user.
 This can be done by running the following line with changed credentials:
 
 ```sh
@@ -22,18 +22,22 @@ You will be asked for a password via the commandline.
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount        | Description                 |
 | ------------------------- | ---------------------- | --------------------------- |
 | `linkding`                | `/etc/linkding/data`   | storage for persistent data |
 
+
 ### Ports
 
 Set the following ports with the -p tag.
 
+
 | Container Port | Recommended outside port | Protocol | Description |
 | -------------- | ------------------------ | -------- | ----------- |
 | `9090`         | `9090`                   | TCP      | WebUI       |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/spikecodes_-_libreddit.md

@@ -1,7 +1,7 @@
 # spikecodes - libreddit
 
 This is a [Docker](/wiki/docker.md) container for the alternative reddit
-frontend [libreddit](../libreddit.md).
+frontend [libreddit](/wiki/libreddit.md).
 The official container and documentation was made by
 [spikecodes](https://github.com/spikecodes/libreddit).
 
@@ -14,10 +14,12 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
 Set the following ports with the -p tag.
 
+
 | Container Port | Recommended outside port | Protocol | Description |
 | -------------- | ------------------------ | -------- | ----------- |
 | `8080`         | `8080`                   | TCP      | WebUI       |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/teamspeak.md

@@ -14,28 +14,34 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
 Set the following variables with the -e tag.
 
+
 | Name                | Usage                        | Default |
 | ------------------- | ---------------------------- | ------- |
 | `TS3SERVER_LICENSE` | accept the license agreement |         |
 
+
 ### Volumes
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount  | Description                 |
 | ------------------------- | ---------------- | --------------------------- |
 | `teamspeak3`              | `/var/ts3server` | storage for ts3-server data |
 
+
 ### Ports
 
 Set the following ports with the -p tag.
 
+
 | Container Port | Recommended outside port | Protocol | Description |
 | -------------- | ------------------------ | -------- | ----------- |
 | `9987`         | `9987`                   | UDP      | ts3-intern  |
 | `10011`        | `10011`                  | TCP      | ts3-intern  |
 | `30033`        | `30033`                  | TCP      | ts3-intern  |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/tetricz_-_mordhau-server.md

@@ -15,6 +15,8 @@ With `stop.sh` you can stop it.
 
 Set the following variables with the -e tag.
 
+
+
 | Name              | Usage                                       | Default |
 | ----------------- | ------------------------------------------- | ------- |
 | `QUERYPORT`       | port for query mordhau                      |         |
@@ -30,24 +32,29 @@ Set the following variables with the -e tag.
 | `SERVER_PASSWORD` | set a password                              |         |
 | `ADMIN_PASSWORD`  | set an admin password                       |         |
 
+
 ### Volumes
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount        | Description                              |
 | ------------------------- | ---------------------- | ---------------------------------------- |
 | `mordhau`                 | `/serverdata/mordhau`  | storage for mordhau server relevant data |
 | `mordhau_steamcmd`        | `/serverdata/steamcmd` | storage for steam related data           |
 
+
 ### Ports
 
 Set the following ports with the -p tag.
+
 | Container Port | Recommended outside port | Protocol | Description |
 | -------------- | ------------------------ | -------- | ----------------- |
 | `7777` | `7777` | UDP | mordhau internal |
 | `15000` | `15000` | UDP | mordhau internal |
 | `27015` | `27015` | UDP | mordhau internal |
 
+
 ### start.sh
 
 ```sh

wiki/docker/tombursch_-_kitchenowl.md

@@ -18,18 +18,22 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
 Set the following ports in the `ports:` section.
 
+
 | Container Port | Recommended outside port | Protocol | Description |
 | -------------- | ------------------------ | -------- | ----------- |
 | `7890`         | `80`                     | TCP      | WebUI       |
 
+
 ### Volumes
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount            | Description              |
 | ------------------------- | -------------------------- | ------------------------ |
 | `kitchenowl_data`         | `/data`                    | storage for all data     |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/tomsquest_-_docker-radicale.md

@@ -18,27 +18,33 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount | Description                 |
 | ------------------------- | --------------- | --------------------------- |
 | `radicale_data`           | `/data`         | storage for caldav          |
 | `radicale_config`         | `/config`       | storage for radicale config |
 
+
 ### Ports
 
 Set the following ports with the -p tag.
 
+
 | Container Port | Recommended outside port | Protocol | Description   |
 | -------------- | ------------------------ | -------- | ------------- |
 | `5232`         | `5232`                   | TCP      | WebUI, caldav |
 
+
 ### Additional
 
 There are some special variables to set.
 
+
 | Flag          | Usage                                                                  |
 | ------------- | ---------------------------------------------------------------------- |
 | `--read-only` | make Radicale read-only, caldav can still be changed and used normally |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/traefik.md

@@ -19,6 +19,7 @@ the [Traefik wiki entry](/wiki/traefik.md#usage).
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
+
 | Outside mount/volume name | Container mount           | Description                             |
 | ------------------------- | ------------------------- | --------------------------------------- |
 | `/etc/localtime`          | `/etc/localtime:ro`       | get the system time                     |
@@ -27,23 +28,28 @@ Set the following volumes in the `volumes:` section of the docker-compose file.
 | `./data/acme.json`        | `/acme.json`              | place to store certificates for https   |
 | `./data/config`           | `/configurations`         | place for dynamically changable configs |
 
+
 ### Ports
 
 Set the following ports in the `ports:` section.
 
+
 | Container Port | Recommended outside port | Protocol | Description |
 | -------------- | ------------------------ | -------- | ----------- |
 | `80`           | `80`                     | TCP      | http        |
 | `443`          | `443`                    | TCP      | https       |
 
+
 ### Networks
 
 Set the following networks in the `networks:` section of the docker-compose file.
 
+
 | Name    | Usage                                  |
 | ------- | -------------------------------------- |
 | `proxy` | network to expose http and https ports |
 
+
 ### Labels
 
 Set the following labels in the `labels:` section.

wiki/docker/vabene1111_-_recipes.md

@@ -19,19 +19,23 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
 Set the following ports in the `ports:` section.
 
+
 | Container Port | Recommended outside port | Protocol | Description |
 | -------------- | ------------------------ | -------- | ----------- |
 | `8083`         | `8080`                   | TCP      | WebUI       |
 
+
 ### Volumes
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount            | Description              |
 | ------------------------- | -------------------------- | ------------------------ |
 | `staticfiles`             | `/opt/recipes/staticfiles` | storage for static files |
 | `mediafiles`              | `/opt/recipes/mediafiles`  | storage for media files  |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/vectorim_-_riot-web.md

@@ -1,6 +1,6 @@
 # vectorim - riot-web
 
-This is a [Docker](/wiki/docker.md) container for a [matrix](../matrix.md)
+This is a [Docker](/wiki/docker.md) container for a [matrix](/wiki/matrix.md)
 client.
 The official container and documentation was made by
 [linuxserver](https://hub.docker.com/vectorim/riot-web).
@@ -15,18 +15,22 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
 Set the following volumes in the `volumes:` section of the docker-compose file.
 
+
 | Outside mount/volume name | Container mount       | Description |
 | ------------------------- | --------------------- | ----------- |
 | `./config.json`           | `/app/config.json:ro` | config file |
 
+
 ### Ports
 
 Set the following ports in the `ports:` section.
 
+
 | Container Port | Recommended outside port | Protocol | Description |
 | -------------- | ------------------------ | -------- | ----------- |
 | `80`           | `80`                     | TCP      | WebUI       |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/ventz_-_bind.md

@@ -1,7 +1,7 @@
 # ventz - bind
 
-This is a [Docker](/wiki/docker.md) container for a [bind](../bind.md)
+This is a [Docker](/wiki/docker.md) container for a [bind](/wiki/bind.md)
-[DNS](../dns.md) resolver.
+[DNS](/wiki/dns.md) resolver.
 The official container and documentation was made by
 [ventz](https://hub.docker.com/r/ventz/bind).
 
@@ -14,28 +14,34 @@ Change the settings according to your needs and run `./rebuild.sh` afterwards.
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount   | Description           |
 | ------------------------- | ----------------- | --------------------- |
 | `bind_cache`              | `/var/cache/bind` | cache for DNS         |
 | `bind_etc`                | `/etc/bind`       | configuration for DNS |
 
+
 ### Ports
 
 Set the following ports with the -p tag.
 
+
 | Container Port | Recommended outside port | Protocol | Description       |
 | -------------- | ------------------------ | -------- | ----------------- |
 | `53`           | `53`                     | TCP      | DNS protocol port |
 | `53`           | `53`                     | UDP      | DNS protocol port |
 
+
 ### Additional
 
 There are some special variables to set.
 
+
 | Flag    | Usage                                                   |
 | ------- | ------------------------------------------------------- |
 | `--dns` | set two of these flags for specific DNS forward servers |
 
+
 ### rebuild.sh
 
 ```sh

wiki/docker/viperproject_-_viperserver.md

@@ -14,7 +14,7 @@ Due to this container being used to build the Silicon and Carbon verifiers it is
 started in interactive mode as demonstrated in the [rebuild section](#rebuildsh).
 Make sure to substitute `<path-to-carbon>` and `<path-to-silicon>`.
 If only one of them is to be built, omit the other.
-Additionally the version of viperproject has to be added for `<viperproject-version>`.
+Additionally, the version of viperproject has to be added for `<viperproject-version>`.
 It also depends on the Z3 version which will be used later.
 For example the version `v4_z3_4.8.7` is working for Z3 versions `4.8.7` and later.
 
@@ -22,11 +22,13 @@ For example the version `v4_z3_4.8.7` is working for Z3 versions `4.8.7` and lat
 
 Set the following volumes with the -v tag.
 
+
 | Outside mount/volume name | Container mount | Description                               |
 | ------------------------- | --------------- | ----------------------------------------- |
 | `<path-to-silicon>`       | `/mnt/silicon`  | (optional) mount Silicon for installation |
 | `<path-to-carbon>`        | `/mnt/carbon`   | (optional) mount Carbon for installation  |
 
+
 ## rebuild.sh
 
 ```sh